Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Powermatic 4" Hose Clamp secures a 4 inch diameter hose, so dust collection lines stay tight on fittings during normal machinery operation. The clamp uses a worm drive mechanism, which tightens the band around the hose as the drive is turned, giving controlled clamping pressure for a consistent seal. This clamp is identified as JT9-JW1022, so it can be matched precisely to documentation that calls out that part number on dust collection systems. It is described as a 4 inch diameter hose clamp with worm drive for JET dust collectors, tying it directly to dust collection use around woodworking machinery. All plastic fittings and hoses in these systems must be grounded against static electrical build-up, so this clamp plays its role on hose runs that are part of a grounded dust collection layout.
This 4 inch diameter hose clamp with worm drive fits around dust collection hoses that are sized for 4 inch dust ports, so it bridges between hose and fitting where a mechanical connection is needed. The worm drive operation provides a progressive tightening action, which helps bring the hose uniformly down onto the dust collector outlet or fitting. Because it is intended for JET dust collectors, the clamp aligns with the hose sizing typically used on that machinery group, supporting straightforward routing in dust collection lines. All plastic fittings and hoses in these runs must be grounded against static electrical build-up, and this clamp secures the hose on sections that participate in that grounded dust collection system.
This 4 inch diameter hose clamp with worm drive for JET dust collectors focuses on hose joints at the collector and along dust collection branches that use 4 inch hose. On these runs, the clamp wraps the hose where it slides over a dust port or plastic fitting, so tightening the worm drive pulls the band snug around the hose. That tightening compresses the hose onto the fitting surface, which supports a firm mechanical grip on the dust collector connection. Because the clamp is identified with the JT9-JW1022 part number, installers can assign it to specific 4 inch hose terminations in a dust collection layout and repeat that selection wherever that part number is called out on drawings or parts lists. All plastic fittings and hoses on these systems must be grounded against static electrical build-up, so this clamp works on hose segments that participate in that grounded dust collection path.
The worm drive clamp design lets the installer adjust tension in small increments, which helps repeat the same level of tightness on multiple dust collection connections along a line. Using a 4 inch diameter clamp that matches the hose size keeps the clamping band positioned correctly on the hose wall, so the worm drive can pull the band evenly around the circumference. That even pull supports consistent contact between hose and fitting at each joint on the JET dust collectors and connected fittings. Because this clamp is specified as JT9-JW1022, it gives a defined reference when planning replacements or adding additional 4 inch hose drops using the same clamping approach. With all plastic fittings and hoses required to be grounded against static electrical build-up, keeping these hose joints secure contributes to stable hose routing within that grounded dust collection environment.
The Powermatic 4" Hose Clamp is described as a 4 inch diameter hose clamp, so it is used on dust collection hose and fittings sized for 4 inch connections.
The clamp uses a worm drive mechanism that tightens the band as the drive turns, so the installer can gradually increase tension for controlled clamping on the hose.
The 4 inch diameter hose clamp with worm drive is specified for JET dust collectors, so it is used on 4 inch hose connections at dust ports and fittings on those collectors.
The JT9-JW1022 part number uniquely identifies this hose clamp, so installers can match it to callouts on dust collection drawings and order the same clamp for replacements.
The product notes that all plastic fittings and hoses must be grounded against static electrical build-up, and this clamp secures hose sections that are part of that grounded system.
The clamp is described as a 4 inch diameter hose clamp with worm drive for JET dust collectors, tying its use directly to dust collection hose connections.
This 4 inch diameter hose clamp with worm drive for JET dust collectors ties directly to dust collection hose runs where a 4 inch connection and controlled clamp tension are needed. The JT9-JW1022 identification lets purchasing and installation teams call out the same clamp across jobs that use JET dust collectors and 4 inch hoses. All plastic fittings and hoses on these systems must be grounded against static electrical build-up, and this clamp serves on hose joints that participate in that grounded dust collection layout. Using this defined clamp simplifies repeating connection details wherever a 4 inch hose termination on a JET dust collector or matching fitting is required.