Riser Block Kit for 14" Bandsaws with 7/8" Guide Post - Jet Tools 708717

Riser Block Kit For 14 Inch Bandsaw Capacity

riser block kit for 14 inch bandsaws increases capacity under the blade guide to a full 12 inch, so the saw handles taller projects that need more resaw height or clearance without changing to a different machine. This JET Tools kit is identified as Jet Tools 708717 and JT9-708717, giving a clear match to JET documentation when selecting the correct riser for a 14 inch saw. The kit is designed for bandsaws that use a 7/8 inch guide post, so the blade guide travels correctly through its full range when cutting taller stock. Increasing capacity under the blade guide lets the operator set guides close to the work while still clearing taller pieces, which supports better control and more accurate cuts on higher workpieces.

Key Riser Block Details That Support Taller Work

• Increasing capacity under the blade guide to a full 12 inch allows a standard 14 inch bandsaw to handle taller projects in one pass, which reduces setups when working with higher panels or thick turning blanks.
• The design for bandsaws with a 7/8 inch guide post keeps the guide system aligned through its extended travel, so the blade support stays consistent when the guide is raised for tall workpieces.
• Using a saw blade size of 105 inch long by 3/8 inch wide with 6 TPI pairs this riser height with a blade suited to general cutting, so typical shop work from curves to straight cuts can stay on a familiar setup.

Mounting This Bandsaw Riser For Accurate Cutting

This JET Tools riser block kit is built for 14 inch bandsaws that match the 7/8 inch guide post requirement, so the guide column and riser work together as one assembly once installed. Because the kit increases capacity under the blade guide to a full 12 inch, the frame extension positions the upper section high enough to clear taller work while still allowing the guides to drop close to the cut line. The specified 105 inch long, 3/8 inch wide, 6 TPI blade length suits the extended wheel spacing created by the riser, so tracking and tension are set around a known blade size after mounting.

Using The Jet Riser Block Kit In Daily Work

Where This Jet Tools 708717 Riser Kit Fits Best

This JET Tools riser block kit serves 14 inch bandsaws that are designed around a 7/8 inch guide post, so shops running that format can expand cutting height without changing their overall saw footprint. Increasing capacity under the blade guide to a full 12 inch lets the saw tackle tall project components such as higher panels or thicker blanks that previously exceeded guide clearance. The classification under Machinery and Saws places this kit in the normal workflow of bandsaw operations, so it becomes part of how the saw is configured rather than a separate processing step when tall stock appears. Matching the saw blade at 105 inch length, 3/8 inch width, and 6 TPI keeps that expanded height coordinated with a blade profile used for many general tasks, so tall and standard pieces can move through the same machine using the same blade specification.

Why These Riser Specifications Support Repeatable Cuts

The full 12 inch capacity under the blade guide gives a consistent upper limit for work height, so operators can plan jigs and resaw setups around a known maximum rather than working near a smaller clearance. Designing the kit for a 7/8 inch guide post maintains the geometry of the guide support, which helps the blade stay laterally supported when the guide is raised for tall cuts. The 105 inch blade length is coordinated with the added spacing introduced by the riser, so wheel alignment and tensioning are based on a specific blade dimension instead of guesswork. Keeping the blade at 3/8 inch width with 6 TPI balances beam strength and tooth count, so the same specification can handle many common cuts while operating within the extended frame height created by this riser block kit.

Common Questions About The Jet Bandsaw Riser Kit

Selecting This Jet Riser Block For Taller Cuts

This JET Tools riser block kit, identified as Jet Tools 708717 and JT9-708717, is built to raise a 14 inch bandsaw to a full 12 inch capacity under the blade guide, so tall pieces move through the same saw used for everyday work. The matching 7/8 inch guide post design and 105 inch by 3/8 inch, 6 TPI blade specification align the frame extension, guide support, and blade choice into one coordinated setup. For shops that need extra cutting height on a 14 inch saw, this kit provides that extended range while staying within a familiar JET bandsaw format.