Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Jet Tools JBOS-5 benchtop spindle sander is a 1/2HP oscillating spindle sander designed for benchtop use, so it brings spindle sanding capability into smaller woodworking shops and jobsite setups without dedicated floor space. The single phase 115V motor lets the machine run on standard shop power, which helps it fit into existing tool layouts without electrical changes. Its benchtop format keeps height and reach practical around other machinery, which supports efficient workflow in tight work areas. As a spindle sander, it handles edge shaping and contour sanding tasks, giving a dedicated setup for curved parts instead of improvising with other sanders. The combination of power, oscillation, and multiple spindle diameters helps this machine cover a range of material thicknesses and radii while keeping the footprint compact for regular production or detailed project work.
The JBOS-5 sander runs on single phase 115V power, which ties directly into common circuits used in many woodworking shops and garages. The 1/2HP motor drives the spindle through an oscillating mechanism, so the sanding sleeve moves up and down one inch while spinning. That motion spreads contact along more of the sleeve surface, which reduces localized wear and heat during extended sanding sessions. The 14-1/2 inch tilting table gives a solid surface to support parts around the spindle, and tilting the table alters the sanding angle instead of repositioning the workbench. Non-skid rubber feet keep the machine stable during operation, so the table stays steady while working around curves or edges.
The JBOS-5 is a benchtop spindle sander built around multiple spindle assemblies, so it can handle different inside radii and edge profiles on projects. It provides 1/4 inch, 1/2 inch, 5/8 inch, 1-1/2 inch, and 2 inch spindle assemblies with 100 grit paper, which covers common curve sizes from tight inside corners to broader arcs. That range lets installers and woodworkers match the spindle closer to the profile, so more of the sleeve contacts the work and sanding goes faster with better control. Four table inserts, in 3/4 inch and 1 inch oblong and 3/4 inch and 1 inch round shapes, surround the spindle opening. These inserts help prevent dust and debris from falling into the motor area, and they also create a closer gap around different spindle sizes. A tighter gap supports smaller workpieces near the spindle, which is useful when sanding narrow parts or delicate profiles. The built-in 2 inch dust port can be connected to dust collection, so material removed at the spindle is directed away from the operator and nearby equipment.
The 1 inch oscillating action is driven by a heavy-duty worm and gear mechanism, so the up-and-down motion is positively controlled during each sanding stroke. That mechanism moves the sleeve through its full travel in a repeatable pattern, spreading the load and prolonging sleeve life on repetitive work. Main spindle support on precision ball bearings keeps rotation smooth under load, so the sleeve tracks evenly and produces a more uniform surface finish from part to part. Four non-skid rubber feet stabilize the machine on the bench during use, limiting movement and helping keep the table square to the spindle while the motor is running. Built-in storage racks for spindles and table inserts position changeover parts close to the working area, which shortens the time between different curve setups. The combination of tilting table, multiple spindle diameters, and shaped table inserts gives installers a controlled way to approach edge sanding, helping reduce rework when fitting curved components or smoothing template-routed parts.
The JBOS-5 benchtop spindle sander uses a 1/2HP motor on single phase 115V power, so it runs on typical shop circuits while delivering consistent power to the sanding spindle.
The one inch oscillating action moves the sleeve up and down as it spins, reducing friction heat, protecting the wood surface, and extending sleeve life during repeated passes.
The JBOS-5 spindle sander uses a large 14-1/2 inch tilting table, giving broad work support and angle adjustment for sanding edges and profiles at controlled bevels.
The JBOS-5 spindle sander provides 1/4 inch, 1/2 inch, 5/8 inch, 1-1/2 inch, and 2 inch spindle assemblies with 100 grit paper, covering a range of common curve diameters.
Four table inserts in 3/4 inch and 1 inch oblong and 3/4 inch and 1 inch round shapes close the gap around the spindle, helping block debris from the motor area and supporting smaller parts.
The JBOS-5 spindle support runs on precision ball bearings and is driven by a heavy-duty worm and gear oscillation system, giving stable rotation and consistent sanding motion.
The Jet Tools 708404 JBOS-5 benchtop oscillating spindle sander combines a 1/2HP, 115V motor, one inch oscillation, and a 14-1/2 inch tilting table to handle everyday contour sanding. With multiple spindle assemblies, shaped inserts, and a 2 inch dust port, it supports controlled shaping of curves and edges in a compact benchtop format. For shops needing dedicated spindle sanding without committing floor space, this machine provides a focused solution for smoothing routed profiles and fitting curved components.