22 inch 36 grit aluminum oxide sandpaper is built as Ready-to-Wrap abrasives for 2244 and 2244 Oscillating Drum Sander, so each wrap is sized to match the drum, which matters when you want predictable tracking and even surface contact while sanding. The 36 grit abrasive cut provides a coarse stock-removal option, which helps when you need to level material or remove heavy machining marks efficiently. The aluminum oxide construction delivers a consistent abrasive surface, which supports repeatable results from wrap to wrap over the life of the set. Supplied by JET Tools under part number JT9-60-2036, the product identity ties directly to JET sanders, which simplifies selecting the correct wraps for that machine family. Classified in the sanders category for wide belt and drum sanding, these wraps are aimed at serious sanding workflows rather than light finishing passes.
The Ready-to-Wrap abrasives are designed specifically for 2244 and 2244 Oscillating Drum Sander, so each wrap is pre-sized to that drum layout, which simplifies fitting the abrasive around the drum without custom measuring during installation. The 22 inch dimension in the product name indicates the working length, which aligns with the drum width, helping the abrasive track correctly when tensioned. The 36 grit aluminum oxide surface is consistent along the length of each wrap, which keeps cutting pressure more uniform as the drum rotates, important when installing a fresh set for parallel stock removal. Listed under the sanders category for wide belt-style sanding, this wrap format fits into standard drum-wrapping workflows where repeat installation and removal are part of everyday shop use.
The Ready-to-Wrap abrasives for 2244 and 2244 Oscillating Drum Sander are purpose-built for those specific JET drum sanders, which means the wraps follow the drum geometry those machines use in woodworking shops. The 22 inch length defined in the product name aligns with the sanding width of the 2244 drum, which matters when you are processing boards that span the full drum because the abrasive coverage remains continuous from edge to edge. Classified under sanders and tied to wide belt sanding applications, these wraps plug directly into sanding workflows that handle flattening panels, leveling glued-up assemblies, or taking down heavy mill marks using a drum sander rather than handheld equipment. The 36 grit rating gives these wraps a coarse position in the grit progression, which is especially useful at the early stages of preparing stock before moving to finer abrasives.
The 36 grit aluminum oxide construction is central to how these wraps perform, because the coarse grit and consistent abrasive material work together to remove material quickly while leaving a predictable scratch pattern that can be followed by higher grits. The Ready-to-Wrap format for 2244 and 2244 Oscillating Drum Sander means each wrap is cut for those drums, which reduces fitting variability from one install to the next and helps you maintain even contact pressure across the board width. The 22 inch dimension in the product name gives a clear indicator of the wrap length, which helps align machine setup and job planning when you are matching abrasive coverage to drum capacity. Identifying the product as JET Tools part number JT9-60-2036 links the wraps directly to the manufacturer catalog, which supports consistent reordering for shops that standardize on a specific abrasive sequence.
The Ready-to-Wrap abrasives are specified for 2244 and 2244 Oscillating Drum Sander, so they are intended for use on those particular JET drum sander models in woodworking applications.
The JET Tools JT9-60-2036 wraps use 36 grit abrasive, which positions them for coarse stock removal tasks before shifting to finer grits in a sanding sequence.
The JT9-60-2036 wraps use aluminum oxide abrasive, which provides a consistent cutting surface that supports repeatable sanding results across the full length of each wrap.
The product name identifies the wraps as 22 inch, so each abrasive piece is sized to match the drum width used on the 2244 series drum sanders.
The product is described as a 3-Pack with three wraps in box, so a single order provides three separate 22 inch abrasive wraps.
This sandpaper is identified as JET Tools part number JT9-60-2036, which ties directly to the Ready-to-Wrap 22 inch 36 grit abrasives for 2244 drum sanders.
The 22 inch 36 grit aluminum oxide Ready-to-Wrap abrasives for 2244 and 2244 Oscillating Drum Sander provide a coarse sanding option that is sized for those drums, giving shops a direct fit for heavy stock removal. With JET Tools part number JT9-60-2036 and a clearly defined 3-Pack format, the product is straightforward to specify when you want consistent wraps for repeat sanding jobs. For woodworking operations that rely on a 2244 series drum sander, choosing this dedicated Ready-to-Wrap abrasive keeps the drum running with a matched 36 grit option suited to early-stage sanding tasks.