22 inch 60 grit aluminum oxide sandpaper uses a coarse abrasive cut that levels stock efficiently, so each pass on the drum sander removes material quickly when heavy sanding or flattening is required. The aluminum oxide abrasive provides a consistent cutting surface along the full length of the wrap, which supports even results across wide workpieces on every run. This sandpaper is part of the Ready-To-Wrap abrasives line, so it is prepared for straightforward fitting to compatible drum sanders without on-site abrasive trimming. The 60 grit rating sets this wrap up for initial sanding steps, where surface preparation and thickness correction matter more than fine finishing. This product is identified by manufacturer part number JT9-60-2060, giving a clear reference when matching existing shop supplies or reordering the same abrasive setup for repeat work. JET Tools branding ties this wrap to established drum sander systems.
This Ready-To-Wrap 22 inch 60 grit aluminum oxide sandpaper is described specifically for 2244 and 2244 Oscillating Drum Sander use, so its length and layout are tailored to wrap those drums correctly. The Ready-To-Wrap format is prepared for direct application to the drum, allowing installers to concentrate on proper alignment and clamp engagement rather than cutting abrasives to size. The 22 inch sizing matches the working width of those JET Tools machines, which supports consistent coverage from edge to edge of the drum during sanding. Because this wrap is part of JET Tools sanding solutions, it aligns with the tensioning and tracking approach designed into the 2244 and 2244 oscillating drum sanders, helping the abrasive stay seated during repeated passes.
Ready-To-Wrap abrasives for 2244 and 2244 Oscillating Drum Sander are intended to run on those specific JET Tools drum sander models, so the 22 inch length and wrap style are matched to their drum geometry and clamping layout. In practice, that sizing allows the sandpaper to track over the full sanding width on these machines, which is useful when flattening panel stock, doors, or assembled components that benefit from wide, uniform passes. The 60 grit aluminum oxide cut suits early sanding stages on these drum sanders, where material removal and leveling are a priority before progressing to finer abrasives. Because this wrap is designed within the JET Tools system for sanders in the Machinery - Sanders, Wide Belt product class, it fits naturally into sanding stations built around these models.
The 60 grit aluminum oxide construction on this JET Tools JT9-60-2060 Ready-To-Wrap sandpaper provides a uniform aggressive cut along the entire 22 inch wrap, which promotes even stock removal across the drum width during repeated passes. On 2244 and 2244 Oscillating Drum Sander machines, that even cut helps reduce low or high spots that can appear when abrasives vary along their length. The Ready-To-Wrap format is tailored to those models, so installers gain a repeatable way to fit the abrasive, wrap the drum, and set tension consistently from one changeover to the next. The clear JT9-60-2060 identifier ties this abrasive directly to its intended JET Tools sanding role, which aids standardizing drum sander setups across multiple operators or shifts. As part of Wurth Baer Supply offerings for the woodworking industry, this sanding wrap supports production-style workflows where predictable abrasive behavior on JET drum sanders is important.
This Ready-To-Wrap abrasive is described for the 2244 and 2244 Oscillating Drum Sander, so its length and wrap style are matched to those JET Tools drum sander models.
This sandpaper is 60 grit, so it serves coarse sanding and stock removal stages where leveling and thickness correction are the main goals before moving to finer abrasives.
This product uses aluminum oxide abrasive, which provides a consistent cutting surface along the 22 inch wrap for even material removal on the drum sander.
This JET Tools sanding wrap carries manufacturer part number JT9-60-2060, providing a clear reference when matching or reordering the same abrasive for shop use.
This sandpaper is categorized under Machinery and Sanders, Wide Belt, so it is positioned for use with drum and wide sanding equipment in woodworking settings.
The 22 inch length aligns with the working width of the specified drum sanders, supporting full-width coverage and uniform sanding passes across wider workpieces.
The 22 inch 60 grit aluminum oxide Ready-To-Wrap abrasive for 2244 and 2244 Oscillating Drum Sander provides a defined coarse sanding option tailored to JET Tools drum machines. With the JT9-60-2060 identifier, shops can match this wrap directly to its intended sanding role and keep abrasive selection consistent across recurring jobs. For woodworking operations built around these JET sanders, choosing this specific Ready-To-Wrap sandpaper ties grit level, length, and machine application together in one straightforward abrasive choice.