Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
22 inch 120 grit aluminum oxide sandpaper Ready-to-Wrap Abrasive Sandpaper (3-Pack) from JET Tools is a set of pre-sized abrasive wraps designed for use on the 2244 and 2244 Oscillating Drum Sander, so the material matches the drum length for straightforward installation. The 120 grit rating provides a medium sanding cut that prepares workpieces between rough stock removal and finer finishing, which helps keep sanding steps predictable across multiple jobs. The aluminum oxide abrasive is suited to general-purpose sanding on woodworking machinery, supporting consistent surface preparation across a range of typical shop tasks. The Ready-to-Wrap format is tailored specifically to the 22 inch drum size, which removes layout and cutting time when changing abrasives during production work. With three wraps provided, the JT9-60-2120 set supports multiple abrasive changes on the same machine, helping maintain a steady sanding workflow when working through batches.
The Ready-to-Wrap abrasives for 2244 and 2244 Oscillating Drum Sander are cut to work with the drum length on these machines, so installers align each wrap to the drum without layout work. This format reduces time spent measuring and cutting from bulk abrasive rolls, which keeps changeovers more predictable during production sanding. The 22 inch length corresponds to the product designation READY-TO-WRAP 22' - 120G, tying the part number directly to the drum size used in the machine. Using wraps sized for the specific drum helps maintain even tension across the abrasive surface, which supports uniform contact between the drum and the workpiece during sanding passes.
Ready-to-Wrap Abrasives for 2244 and 2244 Oscillating Drum Sander are intended for those JET Tools drum sanders, so they are used wherever these machines handle surface preparation. The 22 inch length aligns with the drum in this equipment, placing the abrasive correctly along the sanding width during operation. In a woodworking setting, this means the 120 grit aluminum oxide surface engages the workpiece across the full drum span, helping remove machining marks left from earlier processes. Because the wraps are tailored to the 2244 and 2244 Oscillating Drum Sander, installers can move directly from wrap installation to sanding, fitting them naturally into jobs that rely on the drum sander for intermediate smoothing steps.
The 120 grit rating on this aluminum oxide Ready-to-Wrap Abrasive Sandpaper defines the cut level, so sanding leaves a surface prepared for subsequent finishing stages. On a 2244 or 2244 Oscillating Drum Sander, this medium grit works between coarse stock removal and fine finishing, helping maintain a logical grit progression for repeat jobs. The JET Tools JT9-60-2120 part number identifies this specific 22 inch, 120 grit, three-wrap configuration, which helps shops standardize on one known abrasive when they need consistent performance from run to run. Having three Ready-to-Wrap abrasives in the group allows the operator to replace worn wraps while staying with the same grit and length, supporting uniform results across multiple workpieces in a batch.
These Ready-to-Wrap Abrasives are for the 2244 and 2244 Oscillating Drum Sander, so they are matched to those JET Tools drum sanders for proper fit on the sanding drum.
The 22 inch length matches the drum size identified in the READY-TO-WRAP 22' - 120G description, so each wrap spans the drum the way the 2244 series sanders are designed.
The 120 grit rating provides a medium sanding cut, so it removes material while leaving a surface that is prepared for later, finer sanding or finishing stages.
The wraps use aluminum oxide abrasive, so they function as general-purpose sandpaper for woodworking machinery in shops using the specified drum sanders.
The JT9-60-2120 configuration provides three wraps, so operators can perform several abrasive changes on the same drum sander while keeping the same grit and length.
The Ready-to-Wrap design uses pre-sized 22 inch wraps for the 2244 series drum sanders, so changeovers do not require cutting abrasives from rolls, helping streamline sanding workflows.
The JET Tools 22 inch 120 grit aluminum oxide Ready-to-Wrap Abrasive Sandpaper (3-Pack), part number JT9-60-2120, is tailored to the 2244 and 2244 Oscillating Drum Sander, so it aligns directly with those machines in a woodworking shop. By matching the 22 inch drum and using a defined 120 grit surface, these wraps support predictable sanding stages when preparing workpieces. For shops relying on the 2244 series drum sanders, choosing this Ready-to-Wrap set helps keep abrasive changes straightforward while maintaining a consistent medium-grit sanding step in the process.