Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Jet Tools 708674PK Deluxe Xacta Saw brings a 3HP, single phase, 230V table saw setup that drives demanding cuts while staying in a standard shop power range, so professional installers and woodworkers can handle heavy ripping and crosscutting work. The JET 10 inch DELUXE XACTA SAW identity points to a full-size 10 inch cabinet saw format, so sheet goods and solid stock break-down jobs fit into an everyday workflow. The EXCLUSIVE 30 inch commercial XACTA Fence II with T-square design establishes a solid rip reference across the table, so long rips stay straight and repeatable along the 30 inch rip capacity. The Quick release riving knife works to track blade height changes without tools, so operators can move between cut setups while keeping guarding aligned to the blade path. An integrated arbor lock combines with that riving knife system to support rapid blade change, so switching between different 10 inch blades does not interrupt production runs for long.
The Deluxe XACTA SAW uses a 3HP single phase 230V motor, so the saw aligns with common 230V shop circuits and can be integrated into many cabinet and millwork shops without three-phase power. The enclosed cabinet structure supports that motor and blade system in a rigid housing, so alignment between the arbor, blade, and fence stays consistent during daily moves of heavy stock. The 4 inch dust collection port ties the fully shrouded blade to a standard dust collection line size, so routing a 4 inch hose into an existing collection trunk becomes straightforward in most shop layouts. The integrated arbor lock at the blade location speeds blade changes because the arbor can be held from the table area, so installers and woodworkers can set up different blades for rips, crosscuts, or specialized cuts with less downtime.
The JET 10 inch DELUXE XACTA SAW configuration with 3HP power and 30 inch rip capacity fits cabinet shops, trim carpentry shops, and serious DIY workshops that need a stable cabinet saw for daily use. The EXCLUSIVE 30 inch commercial XACTA Fence II with T-square design supports straight rips in casework parts, face frame stock, and solid panels up to 30 inches wide, so common cabinet components stay within a single pass capacity. The 26 inch x 30 inch wings and deeper table create a generous cast iron work zone, so installers can stage larger panels or long rails on the table while keeping both hands in a controlled position during the cut. The fully shrouded blade design paired with the 4 inch dust collection port fits into shops that value efficient dust collection, because debris is directed into the collection system rather than spreading across surrounding machines.
The upgraded Poly-V belt drive system on this XACTASAW DELUXE 3HP, 1PH, 30 Rip setup delivers smooth power from the motor to the arbor, so blade speed remains consistent and cut lines stay cleaner when feeding material at a steady rate. The Quick release riving knife keeps the splitter aligned closely behind the blade through height adjustments, so boards stay guided through the kerf and the risk of pinching at the back of the blade is reduced during rip work. The integrated arbor lock, located at the blade, lets operators snug and loosen blade hardware without separate external locking methods, so blade swaps are both faster and more controlled. The enclosed cabinet with built-in sealed storage drawer isolates the motor and dust area from the storage space, so jigs and measuring tools in the 12.5 inch x 18 inch x 4 inch drawer remain protected while staying close to the cutting area. The deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters, so angle cuts and crosscuts on face frames, moldings, and trim components can be repeated without re-measuring each setup. The overall XACTASAW DELUXE 3HP, 1PH, 30 Rip layout ties together power, fence accuracy, dust collection, and storage, so work progresses in fewer steps from rough breakdown through precise finished cuts.
Jet Tools 708674PK Deluxe Xacta Saw uses a 3HP, single phase, 230V motor, which supports strong cutting performance while matching common 230V electrical service in many woodworking shops.
The EXCLUSIVE 30 inch commercial XACTA Fence II with T-square design provides a 30 inch rip capacity, which covers many cabinet sides, shelves, and panel rips in a single pass.
The Quick release riving knife on the Deluxe XACTA SAW adjusts with the blade, so guarding follows blade height changes and the workpiece stays guided closely behind the cut during rip operations.
XACTASAW DELUXE 3HP, 1PH, 30 Rip has a built-in 4 inch dust collection port tied to a fully shrouded blade, which channels debris efficiently into a standard 4 inch dust collection system.
The upgraded Poly-V belt drive system on the Deluxe XACTA SAW transfers power smoothly from the motor to the arbor, which supports consistent blade speed and helps maintain smooth cuts.
The built-in 12.5 inch x 18 inch x 4 inch storage drawer sealed from the cabinet keeps necessities within arms reach while shielding them from cabinet dust during saw operation.
This XACTASAW DELUXE 3HP, 1PH, 30 Rip configuration from JET Tools ties a 3HP single phase 230V motor, 30 inch commercial XACTA Fence II, and 26 inch x 30 inch wings into a single cabinet saw, so shops gain power, capacity, and support for cabinet and trim work. The fully shrouded blade, 4 inch dust collection port, and built-in sealed storage drawer focus on daily workflow details, so dust, tooling, and setup stay organized around the saw. For woodworking operations looking to anchor their cutting around a 10 inch cabinet saw, this Deluxe XACTA SAW layout offers a well-defined balance of rip capacity, crosscut control, and on-saw storage that supports repeated production use.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  JP708683 Mfr# JT9-708683 | Low Profile Riving Knife for Deluxe XACTA Saw | ||||
Sold in: 1 Each |  JP708684 Mfr# JT9-708684 | Low Profile Riving Knife with Thin Kerf for Deluxe XACTA Saw |
