Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1 inch spindle for JWS-35X shaper is a dedicated spindle component designed for the Powermatic JWS-35X shaper, so it focuses on matching that machine for straightforward setup and operation. The spindle is identified by JET Tools as manufacturer part number JT9-708314, which helps match this specific part when aligning with existing JET Tools documentation or shop records. The stated 1 inch spindle diameter is suited to cutters and tooling designed for that shaft size, which matters when you want cutters to seat correctly and run true on the shaper. An 8 inch height specification gives a defined vertical span for stacking cutters and spacers, which helps plan cutter setups within the shaper's usable height range. The listed length of 2 inches and width of 2 inches describe the overall body dimensions, giving a sense of how the spindle occupies space in the machine casting or storage areas.
The 1 inch spindle designation defines the cutter interface on the Powermatic JWS-35X shaper, so cutters with 1 inch bores can seat onto the spindle as designed. With an 8 inch height, the spindle offers a defined vertical span for positioning single cutters or multi-cutter stacks, which supports setting up profiles at the height needed for the job. The 2 inch length and 2 inch width describe the body size of the spindle, which relates to how it nests into the shaper's spindle support area during installation or removal. Weighing 6 lb, the spindle has noticeable mass, which contributes to a solid feel when handling it during changeover between different cutter setups on the JWS-35X.
The description stating that this part is for use with the Powermatic JWS-35X shaper ties the spindle directly to that specific machine, which matters when matching the spindle to an existing shaper in the shop. As a 1 inch spindle for JWS-35X shaper applications, it aligns with cutters bored for a 1 inch shaft, allowing shops already set up with 1 inch tooling to apply their current cutter sets. The 8 inch height gives a known working span, which lets users plan whether single large cutters or combinations of smaller cutters and spacers can be arranged within that vertical reach. With the spindle body listed as 2 inches long and 2 inches wide, the part is sized to sit within the JWS-35X shaper layout, supporting consistent positioning relative to the machine table and fence system already in use.
The JET Tools manufacturer part number JT9-708314 identifies this spindle precisely, which supports repeatable ordering when a shop wants the same configuration every time it swaps or replaces a spindle. The 1 inch spindle diameter keeps the interface with 1 inch bore cutters consistent, so cutter stacks can be rebuilt later using the same spacers and height references without changing to a different shaft size. An 8 inch height on the spindle creates a consistent baseline for vertical setups, which helps when recording fence and height positions for profiles that will be repeated on future runs. The 6 lb weight figure reflects the mass of the spindle, which provides a substantial feel when mounting or removing it and supports steady cutter rotation once the spindle is secured in the JWS-35X shaper.
The 1 inch spindle for JWS-35X shaper is described for use with the Powermatic JWS-35X shaper, so it is tied directly to that specific shaper model in shop settings.
The JT9-708314 identifier is the JET Tools manufacturer part number, which designates this specific 1 inch spindle and helps match it to diagrams or order records.
The spindle height is listed as 8 inches, providing a defined vertical area for positioning cutters and spacers when setting up profiles on the Powermatic JWS-35X shaper.
The product is a 1 inch spindle, so it works with cutters and tooling designed for a 1 inch bore, helping them seat correctly on the Powermatic JWS-35X shaper.
The JET Tools spindle weight is listed at 6 lb, giving it solid mass that supports stable handling during installation and removal on the JWS-35X shaper.
The spindle body is described as 2 inches long and 2 inches wide, which relates to how it sits within the shaper assembly and in shop storage locations.
The 1 inch spindle for JWS-35X shaper from JET Tools provides a defined 1 inch shaft, an 8 inch height, and a 6 lb, 2 by 2 inch body sized for the Powermatic JWS-35X. Using the JT9-708314 part number through Wurth Baer Supply connects this spindle directly to its documented dimensions for planning shaper setups.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  JP708323 Mfr# JT9-708323 | Jet Tools 708323 JWS-35X3-1 Shaper 3HP Single Phase 230V | ||||
Sold in: 1 Each |  JP708326 Mfr# JT9-708326 | Jet Tools 708326 JWS-35X5-1 Industrial Shaper 5HP Single Phase 230V |