Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dado Insert for JPS-10TS is a dedicated insert that lets the JET JPS-10TS table saw (with RK) accommodate a dado blade, so the saw can be set up specifically for wider non-through cuts without changing machines. This insert is designed for JET JPS-10TS models identified as "with RK," which keeps its use focused on the saws it is built to match. The insert carries JET Tools part number JT9-708489 and JET Tools 708489, tying it directly to the factory dado solution for this saw. With a length of 15 inches, a width of 5 inches, and a height of 2 inches, the insert occupies a substantial footprint in the throat area, giving the dado blade a matching support zone during cuts. At 2 lb, the insert adds a solid component around the blade opening, which helps keep the work surface feeling consistent across the table during dado operations.
The dado insert is specified at 15 inches long, 5 inches wide, and 2 inches high, so installers can understand how it occupies the throat opening of the JET JPS-10TS (with RK) during setup. With that full-size footprint around the blade area, the insert establishes a defined working surface that keeps the stock close to the blade through the cut path. The listed weight of 2 lb gives the component a solid feel as it rests in the saw top, which supports a consistent surface transition from the cast table to the insert during dado operations. Because the insert is identified for the JET JPS-10TS (with RK), its dimensions and profile are aligned with that saw configuration for dedicated dado use.
The web description specifies that this dado insert fits JET JPS-10TS models with RK, so its geometry is matched to that particular tablesaw configuration for proper throat coverage during dado work. Being part of JET Tools machinery accessories for saws, the insert is positioned as a component within the JPS-10TS system rather than a general-purpose plate. The 15 inch length and 5 inch width allow it to span the blade opening in front of and behind the cutting zone, which helps maintain support under workpieces while they enter and exit a dado cut. With a 2 inch height, the insert presents a defined vertical profile that interfaces with the surrounding table structure on that saw, contributing to a single working plane across the throat area.
The JET Tools part number JT9-708489, also listed as 708489, ties this dado insert directly to the manufacturer specification, which helps installers match the insert to the intended JPS-10TS (with RK) dado configuration. When a dado blade is used, the dedicated insert described as easily converting the JET tablesaw to accommodate a dado blade provides clearance for the wider cutter while maintaining a consistent surface around it. The 2 lb weight gives the insert a substantial presence in the saw top, helping it sit confidently in its recess so the user experiences a uniform work surface during feeding. The classified role under Machinery accessories and Saws connects the part to table saw applications, so the dado insert functions as a task-specific component that supports repeated dado setups on the same JPS-10TS (with RK) saw.
This dado insert is specified to fit JET JPS-10TS table saw models with RK, so it is targeted to that particular JET JPS-10TS configuration for dado blade use.
The web description states that this insert easily converts a JET tablesaw to accommodate a dado blade, so the saw can be set up specifically for dado cutting tasks.
The dado insert is listed at 15 inches in length, 5 inches in width, and 2 inches in height, defining the working footprint around the blade opening in the JPS-10TS with RK.
The JT9-708489 dado insert is specified at 2 lb, giving it a solid presence in the saws throat area so the working surface around the blade feels stable.
The manufacturer part number is JT9-708489, also referenced as JET Tools 708489, which connects the insert to JETs factory dado solution for the JPS-10TS with RK.
The insert is described as converting the JET tablesaw to accommodate a dado blade, so it provides the needed opening and working surface for wider dado cuts on the JPS-10TS with RK.
This JET Tools JT9-708489 dado insert is defined for JET JPS-10TS table saw models with RK and is described as easily converting the saw to accommodate a dado blade. With its 15 inch by 5 inch by 2 inch dimensions and 2 lb weight, the insert establishes a solid, dedicated throat area sized for wider dado cutters. For shops running a JPS-10TS with RK that need repeatable dado setups, selecting this 708489 dado insert aligns the saw with the manufacturer-specified component for that task-focused configuration.