Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Jet Tools 716250 JDP-15F drill press delivers a floorstanding solution built around a 15 inch class drill press with 3-1/8 inch of spindle travel, so you can handle deeper holes in a single stroke when working on larger cabinet or furniture components. A sturdy cast iron head paired with a poly V-belt drive system provides a solid drilling platform that helps translate motor power smoothly to the bit for consistent results. The 3/4HP, single phase, 115V TEFC motor is matched to this drive system so you get efficient power suitable for typical woodworking and shop drilling tasks using standard 115V circuits. This unit is CSA Certified, giving a clearly documented safety and conformity baseline for commercial and professional shop environments. Overall, the JDP-15F is structured for repeatable, accurate drilling where spindle travel and table support matter.
The JDP-15F 15 inch floor drill press uses a large cast iron base and tall column to establish a fixed drilling station, so operators can bring cabinet parts, face frames, or fixtures to the machine instead of moving a benchtop tool. The poly V-belt drive system inside the sturdy cast iron head routes power from the 3/4HP, 1Ph, 115V TEFC motor to the spindle, supporting the speed range controlled by the one-handed belt tensioning system. With the spindle traveling 3-1/8 inches in one revolution of the handle, depth changes remain predictable as the handle sweeps, which supports consistent depth control when using the integrated depth stop for repetitive drilling. The large, precision ground table and its clamping-friendly design support this workflow by keeping stock aligned through each cycle.
This JET Tools floorstanding drill press is designed for drilling tasks in woodworking and general shop environments where a dedicated station improves throughput. The 12-1/2 inch by 17 inch precision ground work table offers enough surface area for cabinet sides, rails, and appliance panels, so these pieces can be drilled without makeshift supports. Twin T-slot grooves and 4 table slots interact with hold-downs or custom jigs, giving multiple hold points along the table to stabilize work at various angles or offsets from the column. The table edge lip further supports this by letting clamps grab quickly at the perimeter, which is useful when fencing off zones for shelf pins or hardware bores. A large cast iron base supports the column under this loading, allowing the machine to stay steady during operations. The built-in LED work light aims illumination at the work zone, helping operators see layout lines and the Xacta-X laser crosshairs even when ambient shop lighting varies. Because the spindle travel reaches 3-1/8 inches with a single revolution of the handle, this drill press can handle deeper bores in thicker assemblies, such as laminated tops or joined components, while the integrated depth stop holds depth limits for repetitive sequences.
The JDP-15F 15 inch floor drill press combines its poly V-belt drive system and 3/4HP, single phase, 115V TEFC motor to deliver stable spindle power, which supports clean cutting performance when bits are chosen for the material. One-handed belt tensioning simplifies speed changes at the head, so operators can match spindle speed to bit size or material without extended downtime or complex tension setups. The sturdy cast iron head anchors the spindle assembly, helping maintain alignment between the spindle, Xacta-X laser system, and table surface. That laser system pinpoints the drill location relative to the bit path, which speeds up part positioning when running repeated patterns, such as evenly spaced bores along cabinet components. The integrated depth stop works with the 3-1/8 inch spindle travel to control hole depth from part to part, reducing variation when drilling for hardware that relies on consistent depth. The replaceable MDF table insert under the bit provides a sacrificial surface that supports work from below, which helps minimize exit tearout and allows the table surface to stay clean by periodically changing the insert. CSA Certification documents that the JDP-15F meets defined safety and performance criteria, supporting its use in professional shops that require certified machinery.
The JDP-15F spindle travels a full 3-1/8 inches with one revolution of the handle, allowing deeper holes in a single pass and simplifying repetitive depth settings.
The work table measures 12-1/2 inches by 17 inches, giving a broad, flat surface for supporting larger panels, jigs, or multiple parts during drilling layouts.
The JDP-15F uses a 3/4HP, single phase, 115V TEFC motor driven through a poly V-belt system, providing efficient power for typical shop drilling tasks.
The JDP-15F features an integrated depth stop, which works with the 3-1/8 inch spindle travel to control hole depth consistently across repeated drilling operations.
The Xacta-X laser system identifies the drill point on the work surface, helping align layout marks to the bit path quickly when setting up repetitive drilling patterns.
The JDP-15F has a long-lasting LED work light that reduces shadows at the bit and a power switch with a safety key and paddle-style off button for controlled shutoff.
The JDP-15F 15 inch floor drill press from JET Tools combines 3-1/8 inches of spindle travel, a 12-1/2 inch by 17 inch precision ground table, and a 3/4HP, 115V TEFC motor to create a stable drilling station. With features like one-handed belt tensioning, an integrated depth stop, an LED work light, and the Xacta-X laser system, this CSA Certified machine supports accurate, repeatable drilling in woodworking and general shop environments. Select the JDP-15F when a fixed floorstanding drill press will streamline layout, drilling, and repetitive hole patterns in your workflow.