Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
JCDC-3 Cyclone Dust Collector from JET Tools is a 3HP, single-phase, 230V cyclone unit designed to move heavy debris into a collection drum while fine dust is captured at the filter. This layout keeps airflow steady during long runs, which helps maintain tool performance across the shop. The system is part of the JET Cyclone Dust Collector line, so its components and layout are built around dust collection workflows in woodworking environments. Heavy debris is pulled down to the collection drum before the debris stream reaches the filter, which limits filter loading and helps the unit hold suction during extended cutting or sanding sessions. Fine dust particles are filtered through pleated material that captures particles down to 1 micron and below, so airborne fines are directed into the system instead of staying in the work area.
This JET Cyclone Dust Collector uses a 3HP motor on single-phase 230V power, so it is suited to shops wired for 230V machinery service where higher airflow is required for multiple tools or larger duct runs. The direct mounted filter removes the need for long flex hose runs between the blower and filter, which reduces static loss in that stage of the system and simplifies mounting because the filter is structurally tied to the collector body. Heavy debris is captured in the 66 gallon drum mounted on independent casters, so servicing the drum involves rolling it out rather than lifting it from a fixed frame. The system is operated by a radio frequency remote control, which allows the unit to be started or stopped from up to 50 feet away in line-of-sight or around typical shop obstacles.
The JET Tools 717530K JCDC-3 Cyclone Dust Collector Kit 3HP Single Phase 230V is designed for dust collection tasks where both heavy chips and fine dust must be handled in one system. Heavy debris is pulled down to the 66 gallon collection drum before the debris stream reaches the filter, so planer chips, jointer shavings, and larger offcuts are directed away from the pleated media. This separation keeps the drum as the primary chip storage location while reserving the filter stage for fines. Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below, so sanding dust and other light material are trapped instead of recirculated. The large drum capacity means longer cutting or sanding sessions can be completed between emptying cycles, which supports production-oriented workflows. The JET Cyclone Dust Collector collection is described as delivering efficiency, aligning this model with shops building centralized dust collection around fixed machines and ductwork.
The direct mounted filter on this JET Cyclone Dust Collector eliminates inefficiencies from ridged flex hosing and bends between the blower and the filter, which preserves airflow and static pressure for use at machine hoods and ports. By avoiding long flex runs at the filter stage, the system reduces turbulence and friction losses that would otherwise reduce capture at the tool. The double paddle manual cleaning system quickly cleans the pleated filter by mechanically shifting dust from the filter surface, which helps restore airflow when fine dust begins to load the media. This manual cleaning feature keeps the filter in service longer between deeper service intervals. Heavy debris being pulled down to the collection drum before reaching the filter means the filter experiences less impact from chips, supporting more stable suction during changing workloads. The radio frequency remote control works from up to 50 feet away, and its remote timer allows the system to run for 2, 4, 6, or 8 hours, so the collector can continue clearing airborne dust and residual duct debris after tools stop running while the operator performs other tasks.
The JCDC-3 Cyclone Dust Collector uses a 3HP motor on single phase 230V power, which aligns it with common 230V shop circuits used for larger stationary woodworking machines.
The direct mounted filter removes ridged flex hosing and bends between blower and filter, reducing airflow losses so more suction is available at connected machines.
The JCDC-3 Cyclone Dust Collector filters fine dust through pleated material that captures particles down to 1 micron and below, directing very small fines into the collection system.
Heavy debris is pulled down into a 66 gallon drum before the airflow reaches the filter, so chips and shavings gather in the drum while the filter focuses on fine dust.
The double paddle manual cleaning system quickly cleans the pleated filter surface, shifting dust away from the media so airflow and suction are restored during ongoing use.
The included radio frequency remote works from up to 50 feet away and the timer runs the system for 2, 4, 6, or 8 hours, allowing dust collection to operate from a distance.
The Jet Tools 717530K JCDC-3 Cyclone Dust Collector Kit 3HP Single Phase 230V combines a cyclone stage, direct mounted filter, and 66 gallon drum to manage both heavy debris and fine dust in one system. The pleated filter captures particles down to 1 micron and below, while heavy debris is directed into the drum before the airflow reaches the filter. The radio frequency remote control with timer function supports starting, stopping, and extended run times from up to 50 feet away. For shops focused on steady suction and streamlined drum servicing, the JCDC-3 Cyclone Dust Collector provides a dust collection layout built around continuous woodworking use.