Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
18 inch 36 grit aluminum oxide sandpaper is designed as a ready-to-wrap abrasive set for the 1836 drum sander, so each wrap is already sized for fitting that machine. The 36 grit cut levels stock aggressively, which helps when flattening or dimensioning material on a drum sander before moving to finer grits. The aluminum oxide abrasive surface provides the cutting face that does the sanding work, so each wrap delivers a consistent abrasive interface along the full 18 inch drum width. Sold as a 4-pack, these wraps give a set quantity of abrasive changes for that 1836 setup, which supports planning around heavier sanding runs on the drum sander.
This ready-to-wrap abrasive is described specifically for the 1836 drum sander, so the wrap sizing is aligned to the drum dimensions on that model. The 36 grit rating signals a coarse cut, which is suited to early sanding stages when the drum sander is used for heavier stock removal. Because these are labeled as ready-to-wrap, the user works with a pre-defined wrap format rather than bulk roll material, which streamlines the process of preparing abrasives for that 18 inch drum.
The web description states that these ready-to-wrap abrasives are for the 1836 drum sander, so each piece is sized around that specific 18 inch drum configuration. That targeted fit helps the drum sander hold an even abrasive track during operation, which supports consistent surface contact across the width of panels or parts. With the wraps already designated for the 1836 model, there is no need to work from generic wide-belt or roll stock sizing for that machine, which keeps the setup focused on that drum span during abrasive changes. The tie between the JET Tools brand and the 1836 drum sander in the product description also specifies the intended machine group, giving a clear link between this abrasive and that drum sander use case.
The product name highlights 36 grit aluminum oxide, so the abrasive profile is defined as both coarse and based on aluminum oxide grain. The 36 grit portion provides a relatively aggressive cut on a drum sander, which is useful when surfacing boards or removing milling marks before moving to finer abrasives. Because the abrasive type is aluminum oxide, the cutting grains form the working surface that stays in contact with the workpiece on every drum rotation, which supports repeatable cutting behavior along the 18 inch span. With four wraps per set as noted in the descriptions, an 1836 drum sander can be staged for multiple abrasive installations at this same coarse grit, which aligns with periods of heavier stock removal in a sanding workflow.
These ready-to-wrap abrasives are described as being for the 1836 drum sander, so their sizing and format are aligned to that machine.
The 18 inch reference in the description reflects the drum sander format, tying these wraps to the 1836 drum sander with that drum span.
The 36 grit rating identifies a coarse abrasive, which is suited to heavier stock removal or early flattening passes on a drum sander.
The product name specifies aluminum oxide, so the cutting surface on each wrap is formed from aluminum oxide abrasive grain.
The description notes 4 wraps in the set for the 1836 drum sander, which provides four abrasive changeouts at this 36 grit grade.
JT9-60-18036 is the manufacturer part number that uniquely identifies this 18 inch 36 grit aluminum oxide ready-to-wrap abrasive set.
The 18 inch 36 grit aluminum oxide ready-to-wrap abrasive from JET Tools is defined for the 1836 drum sander, combining coarse 36 grit cutting with an 18 inch drum format. With four wraps specified for that machine, the set organizes abrasive changes around a known part number, JT9-60-18036, so sanding at this coarse stage can be planned around a consistent abrasive type and grit.