Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
18 inch 100 grit aluminum oxide sandpaper describes an abrasive wrap sized and graded for controlled stock removal on woodworking jobs, so drum sander passes stay consistent across wide workpieces. The aluminum oxide construction provides a uniform cutting action on the drum, which helps keep surfaces even as boards move through the machine. This product is identified as Ready-to-Wrap Abrasives for 1836 Drum Sander, so it is tailored to fit that drum sander format without trimming in typical use. The 100 grit rating positions the wrap in a medium sanding range, which supports flattening and surface preparation steps before finer grits. The product name specifies that it is an abrasive sandpaper, signaling that it is purpose-built for material removal rather than polishing-only tasks on the drum sander.
The Ready-to-Wrap Abrasives for 1836 Drum Sander wording shows that these wraps are configured for that specific 1836 drum layout, which streamlines fitting during changeovers. The 18 inch dimension in the product name communicates the format used on the drum, so the wrap length aligns with the intended drum span. The 100 grit aluminum oxide description tells users the abrasive grade and material they are installing, which ties directly to how aggressively the drum will sand during setup. The product identity as a drum sander abrasive wrap signals that installation centers on winding the material onto the drum rather than using sheet or belt configurations.
The web description states that these are Ready-to-Wrap Abrasives for 1836 Drum Sander, so the wraps are applied directly to the drum of that sander model in woodworking environments that use a wide drum machine. The 18 inch callout in the product name ties the wrap size to the machine format, helping align the abrasive with the drum span as boards pass underneath. Because the product is classified under Sanders, Wide Belt in the category structure, it sits in the same general sanding workflow used for wide stock preparation around machinery. The 100 grit rating positions this wrap for stages where material needs controlled removal while still aiming toward a reasonably smooth finish, so it suits passes that follow heavier cuts yet precede final fine-grit steps. The aluminum oxide abrasive description in the product name shows that the working surface on the drum uses this common abrasive material, which supports predictable sanding behavior on typical woodworking substrates.
The identification as Ready-to-Wrap Abrasives for 1836 Drum Sander indicates a wrap format that matches that drum sander configuration, which helps operators repeat setups without reworking lengths. The 18 inch dimension in the product name defines the wrap sizing, giving a consistent reference point so each changeover maintains the same sanding coverage on the drum. The 100 grit classification tells users exactly how this wrap will cut relative to coarser or finer options, which simplifies selecting this part when a medium sanding stage is required in a multi-step process. The aluminum oxide labeling in the product name connects the wrap to a specific abrasive type on the drum surface, which supports predictable scratch patterns from one installation to the next. The manufacturer part number JT9-60-18100 uniquely identifies this configuration, so repeat orders can match prior drum setups and keep sanding stages uniform across different projects.
The Ready-to-Wrap Abrasives for 1836 Drum Sander wording states that these wraps are configured for the 1836 Drum Sander, aligning the abrasive format to that machine's drum layout.
The 18 inch dimension in the product name describes the wrap format used on the drum, helping match the abrasive length to the intended span of the 1836 Drum Sander drum.
The 100 grit description identifies this as a medium abrasive grade, shaping how aggressively the wrap cuts so users can align it with intermediate sanding steps.
The product name states aluminum oxide, so the cutting surface on the wrap uses aluminum oxide abrasive to provide a consistent scratch pattern on the drum.
The product name describes this as a 4-Pack and the web description notes 4 Wraps, supporting planning for multiple abrasive changes during extended sanding work.
The manufacturer part number JT9-60-18100 uniquely identifies this 18 inch 100 grit aluminum oxide Ready-to-Wrap abrasive, simplifying reordering for the same drum sanding setup.
The 18 inch 100 grit aluminum oxide Ready-to-Wrap Abrasives for 1836 Drum Sander description ties this product directly to that drum sander format, linking size, grit, and abrasive type to a known setup. The 4-Pack structure referenced in the product name and web description supports planning for multiple abrasive changes as workloads increase. Choosing the JT9-60-18100 configuration keeps the same 100 grit aluminum oxide wrap available job after job, so sanding stages on the 1836 Drum Sander can stay consistent across repeat projects.