Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
18 inch 220 grit aluminum oxide sandpaper defines this JET Tools Ready-to-Wrap abrasive as a fine-cut solution for achieving a smooth surface on your 1836 Drum Sander, so each pass refines the workpiece with controlled material removal. The aluminum oxide abrasive works as a consistent cutting surface, which helps produce uniform finishes across multiple boards in the same run. The 220 grit rating sets the scratch pattern for finish-sanding stages, which supports clean surface preparation before applying coatings or edge work. The Ready-to-Wrap format is designed as a pre-cut abrasive wrap, so it is shaped for straightforward fitting to the drum on the 1836 Drum Sander. With four wraps in each 4-pack, a shop can keep multiple changes on hand for continuous work, which supports uninterrupted sanding sessions during production or project runs.
The Ready-to-Wrap abrasives for 1836 Drum Sander format defines this product as a pre-sized wrap for that specific drum size, so fit on the machine drum aligns with the intended abrasive path. Because the wrap is sized for 18 inch use, installers can position the first edge on the drum and follow the spiral path without cutting off excess length, which supports repeatable installation on every change. The 220 grit surface runs the length of the wrap, so once the drum is covered, the full contact area delivers a fine sanding action in one pass. With four wraps grouped together in each 4-pack, shops can cycle through fresh wraps as they wear, which maintains consistent sanding results across longer production or project sequences.
This 18 inch 220 grit aluminum oxide Ready-to-Wrap abrasive is identified in the SAP description as READY-TO-WRAP 18' - 220G (4/BOX, which defines it as a fine-grit wrap for an 18 inch drum setup. The web description specifies it as Ready-To-Wrap Abrasives for 1836 Drum Sander, 4 Wraps in Box, so its primary role is on that drum sander model in woodworking or similar sanding tasks. In a sanding sequence, this 220 grit wrap follows coarser abrasives, so it moves the surface toward a smoother, finish-ready state while still operating on the same 1836 Drum Sander. The JET Tools branding links the wrap to the same manufacturer as the drum sander line, which supports consistent performance expectations when matching abrasives to machines from the same source.
The manufacturer part number JT9-60-18220 identifies this specific 18 inch 220 grit aluminum oxide wrap, so when shops record that number they can repeat the same abrasive setup across multiple orders without changing sanding results. The Ready-to-Wrap abrasives for 1836 Drum Sander wording confirms that the wrap geometry is matched to that drum configuration, which helps the abrasive track correctly across the workpiece as the drum turns. Because the product name calls out 4-Pack, users can plan their sanding runs around four individual wraps per order reference, which supports scheduling abrasive changes within a job sequence. The defined 220 grit rating keeps the finish level predictable from board to board, so operators can coordinate downstream finishing steps, such as sealing or further surface work, around a known sanding profile delivered by this wrap.
This Ready-To-Wrap Abrasives for 1836 Drum Sander product is sized and described for use on the 1836 Drum Sander, aligning the wrap length and format with that machine.
The JT9-60-18220 sandpaper provides 220 grit, which delivers a fine sanding action suited to refining surfaces after coarser grits in a sanding sequence.
This 18 inch wrap uses aluminum oxide as the abrasive material, giving the drum a consistent cutting surface across the full contact area of the sander.
The 18 inch 220 Grit Aluminum Oxide Ready-to-Wrap Abrasive Sandpaper (4-Pack) description states 4 Wraps in Box, providing four separate wraps per order reference.
The 18 inch length is tailored for the 1836 Drum Sander drum, letting installers wrap the drum without trimming, which supports consistent, repeatable abrasive changes.
The Ready-to-Wrap format arrives pre-sized for the 1836 Drum Sander, so installers fit the wrap directly to the drum, reducing setup time between sanding stages.
The 18 inch 220 Grit Aluminum Oxide Ready-to-Wrap Abrasive Sandpaper (4-Pack) from JET Tools ties directly to the 1836 Drum Sander, so the wrap length, grit, and material all match that machine setup. Choosing the JT9-60-18220 part number keeps sanding outcomes consistent across repeat orders, which supports predictable surface quality from project to project. For shops or serious DIY users relying on the 1836 Drum Sander, this Ready-to-Wrap format provides a defined fine-grit step in the sanding sequence, so the abrasive role in the workflow is clear before starting the next run.