
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Jet Tools 727300B JWSS-18" Scroll Saw is an 18 inch scroll saw from JET Tools built for detailed scrolling work. The saw offers eighteen inches of throat capacity, so larger workpieces can be maneuvered for longer interior and exterior cuts without constant re-clamping. Its large 11-5/8 inch by 21 inch, 1/4 inch thick steel table provides a stable working surface, which supports smoother material feed and more consistent line control. An arm that tilts 45 degrees right and 30 degrees left keeps the work table flat for more accurate cutting, so you angle the blade instead of wrestling the stock. The saw is designed to optimize your scrolling experience, pairing throat depth, a rigid table, and arm tilt with a variable speed range and a top lift, spring loaded arm to support controlled, repeatable cutting on detailed projects.
The JWSS-18B scroll saw uses a large 11-5/8 inch by 21 inch, 1/4 inch thick steel table to provide a solid base, so once the saw is placed on a suitable stand or bench, the surface supports both small and larger stock without flex. The arm tilts 45 degrees right and 30 degrees left while the work table stays flat, so setup focuses on dialing in the arm angle instead of shimming the work surface. The exclusive upper mechanism that clamps and tensions the blade in one step simplifies blade setup, and the removable, tool-less lower blade holder further streamlines blade path preparation for interior work. Together with the table slot for the blade, these features support a straightforward setup process for scrolling operations.
The JWSS-18B scroll saw from JET Tools offers eighteen inches of throat capacity, which suits projects that demand long scroll cuts, nested patterns, or larger decorative panels without constant repositioning. The large 11-5/8 inch by 21 inch, 1/4 inch thick steel table provides a stable working surface, helping the operator guide material steadily along tight radii and fine details. An arm that tilts 45 degrees right and 30 degrees left while keeping the work table flat supports angled cuts on signs, fretwork, or custom trim pieces without losing table support under the workpiece. The variable speed range allows the saw to be set for different scrolling applications, so the same machine can handle delicate cuts that favor slower speed as well as longer runs that benefit from a faster stroke rate.
The exclusive upper mechanism that clamps and tensions the blade in one step simplifies each blade change, so operators spend less time adjusting and more time cutting, which is helpful on jobs with frequent pattern changes. The tool-less lower blade holder is removable, allowing fast blade release and reset without separate tools, which matters during interior pierce cuts where threading the blade through many drilled holes can otherwise slow production. A table slot for the blade makes it easier to feed the blade through workpieces, supporting efficient transitions between outside and inside cuts on detailed layouts. The top lift, spring loaded arm holds the arm up, keeping the blade path accessible while workpieces are positioned or patterns are re-threaded, which keeps the workflow smooth on repeat cuts. Together, these design choices optimize the scrolling experience by combining accurate arm tilt, stable table support, and quick blade handling into a machine focused on practical shop use.
The JWSS-18B scroll saw offers eighteen inches of throat capacity, allowing larger workpieces and longer scroll cuts to be handled without constantly turning or re-clamping the material.
The JWSS-18B uses an exclusive upper mechanism that clamps and tensions the blade in one step, and a removable tool-less lower blade holder, which reduces blade change time and simplifies interior cuts.
The arm on the JWSS-18B tilts 45 degrees right and 30 degrees left while the work table stays flat, so angled cuts can be made while the workpiece remains fully supported on the table.
The JWSS-18B has a large 11-5/8 inch by 21 inch, 1/4 inch thick steel table, providing a stable working surface that supports smooth material feed and controlled scrolling.
The top lift, spring loaded arm on the JWSS-18B holds the arm up, keeping the blade path open for threading blades through patterns and positioning workpieces between cuts.
The variable speed range on the JWSS-18B allows the operator to set stroke speed for different materials and cut qualities, supporting cleaner edges and better control across varied scrolling tasks.
The JWSS-18B scroll saw from JET Tools combines eighteen inches of throat capacity with a large 11-5/8 inch by 21 inch, 1/4 inch thick steel table, supporting steady control on detailed cuts. Its arm tilts 45 degrees right and 30 degrees left while the table stays flat, so angled work keeps full surface support. With an exclusive one-step blade clamp and tension mechanism, a removable tool-less lower blade holder, a table slot for the blade, a variable speed range, and a top lift, spring loaded arm, this saw is designed to optimize your scrolling experience on demanding shop projects.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set | JP727201 Mfr# JT9-727201 | JWSS Lower Blade Holder for JET Scroll Saws Set of 3 - Jet Tools 727201 | ||||
Sold in: 1 Each | JPJWSS22B-253 Mfr# JT9-JWSS22B-253 | Foot Switch Assembly for Jet Scroll Saws - Jet Tools JWSS22B-253 |