25 inch 36 grit aluminum oxide sandpaper defines this JET Tools Ready-to-Wrap abrasive set, giving your drum sander a coarse cut for aggressive stock removal on suitable woodworking projects. The aluminum oxide abrasive delivers a consistent cutting action, so material removal stays predictable across each pass. This product is identified as JET Tools part number JT9-60-25036, tying it directly to the manufacturers Ready-To-Wrap line for their sanding machinery. Each abrasive is designed as a wrap format, so it fits the Ready-To-Wrap approach used on compatible drum sanders without loose sheet handling. The product is described as Ready-To-Wrap Abrasives for the 2550 Drum Sander, so it matches that specific machine family for straightforward setup. With three wraps per box, each installation can be swapped out for a fresh wrap when a prior wrap is worn, helping maintain sanding performance during extended work.
These Ready-To-Wrap Abrasives for the 2550 Drum Sander are sized so each wrap can sit along the drum in the intended format, which supports proper tension and contact for the machines sanding action. The 25 inch length is part of that match between wrap and drum, so the abrasive extends across the working width in a controlled pattern. Because the product is designed as a wrap for the 2550 Drum Sander, the alignment between abrasive and machine style is built into the part. The 36 grit surface then works across that full fit area, so every pass uses the coarse abrasive consistently. With three wraps present, a shop can move from one installed wrap to another identical wrap, keeping the same length, grit, and material ready for continued sanding.
JET Tools Ready-To-Wrap abrasives in this JT9-60-25036 version are described specifically for the 2550 Drum Sander, so their primary application is on that drum sander platform in woodworking environments. The 25 inch measurement and wrap style combine to suit the machines drum configuration, so installers position each wrap along the drum in the way the Ready-To-Wrap system expects. This connection between the 2550 Drum Sander description and the abrasive format means shops using that machine can match their sanding media directly to the tool. In cabinet or woodworking shops using a 2550 Drum Sander, these wraps provide the coarse 36 grit cutting surface needed at early sanding stages.
The 36 grit aluminum oxide surface on these wraps gives a coarse profile, so the abrasive cuts quickly at the point of contact on the drum sander. On a 2550 Drum Sander, that coarse profile is valuable when flattening stock or taking down high spots before moving to finer abrasives. The aluminum oxide construction supplies the actual cutting particles, so each rotation of the drum uses the same abrasive type, supporting consistent behavior from one workpiece to the next. Because each wrap shares the same 36 grit and 25 inch specification, a shop can swap worn wraps for fresh ones while keeping their sanding behavior predictable. The Ready-To-Wrap format supports this by having the abrasives pre-formed as wraps, so installers place them on the drum in a repeatable pattern that maintains drum coverage and contact.
These Ready-To-Wrap Abrasives are described for the 2550 Drum Sander, so they are matched to that JET Tools drum sander style for proper wrap application on the drum.
The 36 grit rating on this sandpaper indicates a coarse abrasive, so the wrap removes material aggressively, which is useful for initial sanding passes and stock reduction.
The 25 inch measurement describes the wrap size used in this JET Tools abrasive, so it is sized to match the Ready-To-Wrap configuration on the 2550 Drum Sander drum.
The abrasive surface is aluminum oxide, so the cutting action comes from aluminum oxide particles, which provide a consistent sanding behavior across each drum rotation.
This Ready-To-Wrap abrasive product is described as having 3 wraps in box, so there are three separate wraps with the same 25 inch 36 grit aluminum oxide specification.
The JT9-60-25036 identifier is the JET Tools manufacturer part number, so it ties this 25 inch 36 grit aluminum oxide Ready-To-Wrap abrasive directly to that specific catalog listing.
Choosing this JET Tools JT9-60-25036 Ready-To-Wrap abrasive gives a 25 inch 36 grit aluminum oxide wrap built for the 2550 Drum Sander, so sanding setups can rely on a defined coarse cut and a wrap format aligned with that machine style. For shops wanting to keep a consistent coarse sanding stage on a 2550 Drum Sander, this product keeps grit, length, and abrasive type tied to a single manufacturer part.