Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
25" 180 grit aluminum oxide sandpaper is designed as Ready-To-Wrap abrasives for the 2550 Drum Sander, so each wrap matches the machine width and grit needed for controlled stock removal. The JET Tools branding and JT9-60-25180 part number identify this as the specific abrasive set intended for that 2550 Drum Sander application, which helps keep grit and sizing consistent across changeouts. The 180 grit rating provides a fine cutting action that smooths surfaces after heavier sanding, which supports cleaner finishing steps on the same machine. Aluminum oxide construction delivers the cutting face specified for these wraps, which supports steady material removal during extended sanding passes. The Ready-To-Wrap format organizes the abrasives specifically for the 2550 Drum Sander, which simplifies matching each abrasive wrap to that machine during setup.
The Ready-To-Wrap abrasives for the 2550 Drum Sander arrive already designated as wraps for that specific machine, so each 25" 180 grit aluminum oxide sandpaper length is organized around the drum sander application instead of bulk roll stock. This format pairs the abrasive type to the JET Tools 2550 Drum Sander naming in the Web Description, which supports consistent abrasive changes without re-measuring or improvising lengths. The 3-Pack structure referenced in the product name groups the wraps together as a coordinated abrasive set, which lets installers and shop teams plan multiple sanding runs at the same 180 grit level on the 2550 Drum Sander.
The Web Description specifies these Ready-To-Wrap abrasives for the 2550 Drum Sander, so their 25" length and configuration align with that drum sander format during sanding operations. By matching the abrasive wraps to the 2550 Drum Sander naming, the sandpaper serves directly in that machine for processing panels and stock that fit the drum capacity, keeping the abrasive geometry consistent with the machine design. The 180 grit aluminum oxide surface is applied wherever a fine sanding step on the 2550 Drum Sander is needed after coarser abrasives, so the same drum setup can move from dimensioning toward finish-ready surfaces.
The JET Tools brand association and JT9-60-25180 manufacturer part number link these wraps to a defined abrasive specification, so each Ready-To-Wrap 25" 180 grit aluminum oxide sandpaper matches the intended performance for the 2550 Drum Sander. That consistent pairing between grit, abrasive material, and drum sander application helps keep removal rates and surface quality predictable from wrap to wrap during production or shop work. The 3-Pack structure in the product name provides a set of matching wraps at the same grit, so sanding passes can continue at a uniform 180 grit level without changing abrasive type mid-run on the 2550 Drum Sander. Because the Web Description calls out Ready-To-Wrap abrasives for the 2550 Drum Sander, the wraps are organized around that machine use, which supports repeatable sanding setups whenever JT9-60-25180 is selected for fine sanding stages.
These Ready-To-Wrap abrasives are specified in the Web Description for the 2550 Drum Sander, so they are aligned to that machine for sanding operations.
The 25" dimension in the name identifies the wrap size used for the Ready-To-Wrap abrasives, so each sandpaper length is matched to the 2550 Drum Sander width.
The 180 grit rating provides a fine abrasive cut, so on the 2550 Drum Sander it suits smoothing after coarser passes and preparing surfaces for finishing steps.
These JET Tools Ready-To-Wrap abrasives are described as aluminum oxide, so the sandpaper face is built for steady cutting during drum sanding passes.
The product name states 3-Pack and the Web Description notes 3 wraps in box, so this sandpaper set provides three Ready-To-Wrap abrasive lengths.
Part number JT9-60-25180 ties directly to this 25" 180 grit aluminum oxide Ready-To-Wrap abrasive for the 2550 Drum Sander, helping match exact replacements.
This 25" 180 grit aluminum oxide Ready-To-Wrap abrasive sandpaper from JET Tools, identified as JT9-60-25180, is specified as Ready-To-Wrap abrasives for the 2550 Drum Sander, so it suits shops running that machine at a fine sanding stage. The 3-Pack structure and 180 grit rating combine to support extended runs at a consistent finish level on the 2550 Drum Sander. For work that calls for the abrasive defined in the Web Description, this sandpaper set aligns the grit, length, and JET Tools branding to the 2550 Drum Sander application.