Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
JET 15 inch straight knife planer JWP-15B is a 15 inch planer built for projects where board thickness needs to be beyond exact. The 3 horsepower motor runs on 230V, giving consistent power for surfacing wider stock in a small to mid-size shop. The straight knife cutterhead is supported by the Precision Air Strut System (PASS), which provides consistent upward pressure on the cutterhead and reduces the chance of board snipe so more of each board length is usable. A two speed gearbox lets you choose between 16 feet per minute or 20 feet per minute feed rate, so you can balance cut efficiency and surface finish for different runs. A rock-solid cast iron table supports the work under the cutterhead, helping maintain a stable reference surface for repeatable thickness.
The JET Tools 722150 JWP-15B planer uses a dual infeed speed control with a two speed gearbox, so feed speed changes are part of normal setup between runs. Choosing 16 fpm or 20 fpm lets you tune stock removal and surface quality to the job. The Precision Air Strut System supports the cutterhead as stock passes, which helps keep the head tracking parallel to the cast iron table for more consistent thickness. Steel infeed and outfeed tables fold down when you are positioning the planer, then open to support boards during operation. The angled 4 inch dust port connects to a dust management system and routes the hose so it stays away from the operator path while chips are carried off the machine.
The JWP-15B 15 inch planer fits shops that need more capacity than small bench planers without moving to very large industrial lines. The 3 horsepower, 230V motor provides the power level expected in professional and serious hobby shops, so boards up to 15 inches wide can be thicknessed in regular use. The rock-solid cast iron table and steel infeed and outfeed table extensions form a continuous support path under and around the cutterhead, which helps keep long or wide pieces tracking flat through the cut. Folding extensions are useful when space is tight around other machines, because they provide support during planing then pivot out of the way between jobs. The angled 4 inch dust port is sized for common dust collection systems, so the planer can be tied into an existing dust line to handle the heavy chip volume planers create.
The Precision Air Strut System (PASS) is central to how this JET Tools planer manages surface consistency. By providing consistent upward pressure on the cutterhead, the system stabilizes the cutterhead position as stock enters and exits, which reduces the chance of board snipe and preserves more usable length. Dual infeed speed control with 16 fpm and 20 fpm settings lets you adjust feed rate to match species, board width, and desired finish, so you can run a slower, finer pass when appearance is critical or shift to a faster pass when bulk thicknessing is the priority. The straight knife cutterhead works with the solid cast iron table to reference boards against a stable surface, which supports uniform thickness across repeated passes on project components. The angled 4 inch dust port keeps the dust hose routed away from the operator, so stock feeding and outfeed handling stay clear while chips are evacuated from the cutterhead area.
The JWP-15B planer uses a 3 horsepower motor rated at 230V, which supports continuous planing of 15 inch stock in typical professional and serious DIY shop environments.
The dual infeed speed control provides 16 fpm or 20 fpm feed rates, allowing slower passes for improved surface finish or faster passes for higher throughput on repetitive thicknessing runs.
The Precision Air Strut System applies consistent upward pressure on the cutterhead, stabilizing it during entry and exit of boards and reducing the chance of snipe at board ends.
The rock-solid cast iron table provides a flat, stable reference surface, helping boards track evenly under the cutterhead for more uniform thickness across their length and width.
The steel infeed and outfeed table extensions support longer stock as it enters and exits the cutterhead area, then fold away to reduce the planer footprint when not in use.
The angled 4 inch dust port connects to a dust management system and directs the hose to the side, helping remove chips efficiently while keeping the hose clear of the operator.
The Jet Tools 722150 JWP-15B 15 inch straight knife planer brings a 3 horsepower, 230V motor together with dual infeed speed control, PASS cutterhead support, and a cast iron table to manage thicknessing in demanding woodworking shops. Folding steel infeed and outfeed tables extend support for longer stock, then pivot away to free up floor space between runs. An angled 4 inch dust port connects to a dust management system, keeping chips under control while you focus on feeding boards and tracking thickness targets. For shops stepping up to a 15 inch planer with controlled snipe reduction and adjustable feed rates, this JET Tools machine aligns well with regular thicknessing workflows.