Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Powermatic SLR12 Rip Saw 15HP starts with full cast iron construction, which keeps the machine stable during ripping so stock tracks consistently through the cut on repeat runs. The 15HP main motor pairs with a 2HP feed motor, delivering the power needed to drive rip cuts while the feed system maintains steady material movement for production work. An auto-oiler with shut off services the conveyor chain, keeping it lubricated as it runs so the chain continues to carry material smoothly over time. Seven pressure rollers hold stock down as it enters and moves past the blade, so pieces stay in contact with the feed and fence. Dual anti-kickback devices work alongside those rollers to help prevent stock discharge back toward the operator during ripping. With these elements working together, this saw is built to handle rip operations in a consistent, controlled path.
The large 18 inch rip capacity gives the operator room to process wider stock in a single pass, reducing the need to pre-size boards before ripping. A 3-7/8 inch depth of cut allows thicker material to be processed, so more substantial pieces can move through the same machine instead of routing them to another saw. Variable feed speeds tie directly into this capacity, since different type stock benefits from faster or slower feed to balance cut quality and output rate. Full cast iron construction supports these capacities by keeping the machine rigid, so table surfaces and alignment hold steady under load. The adjustable position control box brings feed and motor controls into a comfortable location for the operator, which can streamline workflow when changing feed speed between runs or pausing production.
The Powermatic SLR12 rip saw offers an 18 inch rip capacity, giving shops the ability to process wide material in one pass so panel and board breakdown can stay on a single machine. A 3-7/8 inch depth of cut means thicker stock falls within the saws working range, so structural or heavier components can be ripped instead of limited to thin work. The 15HP main motor drives these cuts, supplying the power needed to carry blades through demanding rips while holding speed under load. At the same time, the 2HP feed motor manages stock advancement, so the feed system keeps material moving consistently across the table. Together, these capacities position the saw for operations that need both width and thickness in regular production.
Full cast iron construction forms a rigid base and table for the SLR12, helping the machine resist flex as stock moves through, which supports consistent alignment from entry to exit. Seven pressure rollers span the infeed and cutting area, holding boards firmly against the table so they track straight along the feed path. Dual anti-kickback devices work with those rollers to help prevent stock discharge back toward the operator, which keeps the workpiece moving in the intended direction during ripping. Variable feed speeds let the 2HP feed motor match the advance rate to different type stock, balancing surface finish and throughput for each job. The auto-oiler with shut off continuously services the conveyor chain, so the chain remains lubricated and able to carry material smoothly over repeated cycles. With an adjustable position control box, operators can place controls where they can quickly set feed speed or respond during a run, supporting consistent results from shift to shift.
The Powermatic SLR12 rip saw uses a 15HP main motor and a 2HP feed motor, so the blade power and feed system work together to support large production capacity.
The Powermatic SLR12 saw provides an 18 inch rip capacity and 3-7/8 inch depth of cut, allowing wide and relatively thick stock to be processed within one machine setup.
The seven pressure rollers hold stock down while dual anti-kickback devices help prevent stock discharge, so boards stay controlled and move forward along the feed path.
The auto-oiler with shut off lubricates the conveyor chain, so the chain continues to move stock smoothly and supports long service life in ongoing production.
The full cast iron construction provides rock-solid operation, limiting vibration so material tracks more consistently through the cut during continuous ripping.
Variable feed speeds let the operator set the advance rate for different type stock, so cut quality and throughput can be matched to each material and job.
The Powermatic SLR12 rip saw 15HP 3Ph 230/460V combines full cast iron construction, a 15HP main motor, and a 2HP feed motor to support demanding rip operations. With 18 inch rip capacity, 3-7/8 inch depth of cut, seven pressure rollers, and dual anti-kickback devices, it is set up for controlled, repeatable production ripping. Variable feed speeds and an adjustable position control box give operators direct control over feed and workflow. For shops needing a rip saw that ties substantial power to material handling and control features, this Powermatic SLR12 configuration is a strong fit.