Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Powermatic PM2244 precut abrasive 80 grit is an aluminum oxide sanding media designed for heavy-duty all-purpose sanding, so it tackles stock removal and general surfacing on the PM2244 without constant media changes. The aluminum oxide construction provides a cutting surface suited to a wide range of woods, helping installers and shop crews handle mixed material runs on the same machine. This product is supplied in a 3-pack format, so a team can keep multiple abrasive lengths ready for changeover during longer sanding sessions. The abrasive is identified by manufacturer part number PM9-1792203, which ties directly to the PM2244 setup and simplifies reordering when a specific grit is working well in the process.
This PM2244 precut abrasive 80 grit is cut to suit the Powermatic PM2244, so the length and layout are matched to the drum and feed system, which simplifies installation compared with trimming bulk rolls. The aluminum oxide abrasive is listed for heavy-duty all-purpose sanding, so a single installation can cover both initial leveling and follow-up passes within the same grit range. The heavy-duty X weight cloth backing is specified for strength, so the abrasive supports tensioning around the drum during setup without excessive stretching. The resin bonded construction is described as maximizing grain retention, so once installed on the machine, the abrasive maintains its cutting surface through multiple boards before replacement.
This PM2244 precut abrasive 80 grit is intended for the Powermatic PM2244 sander, so its dimensions and layout align with that machine for straightforward drum wrapping. The aluminum oxide construction is specified for heavy-duty all-purpose sanding, so it fits well in workflows that move from jointed or planed stock into drum sanding for flattening and general surface prep. The open coat design is described as offering non-loading properties, so it is particularly useful when sanding resinous or dust-generating woods where reduced clogging helps maintain even contact across the width. The heavy-duty X weight cloth backing is identified as providing strength, so this abrasive is suited to applications where the drum runs for extended cycles under consistent pressure without backing failure.
The resin bonded construction is noted for maximum grain retention, so the cutting particles stay anchored as the drum spins, which supports steadier removal rates across multiple passes and helps reduce surface variation from dull or missing grit. The anti-static backing is described as allowing easier dust pickup, so dust is more readily carried away toward dust collection, which supports a clearer sanding path and more predictable scratch patterns on the workpiece. The open coat, non-loading description means there is intentional spacing between abrasive grains, so debris has room to escape, which helps preserve the 80 grit cutting action instead of glazing over during production runs. The combination of aluminum oxide, X weight cloth backing, and resin bond creates a balance of cut and durability, so once the abrasive is tensioned on the PM2244, the operator can run repeated boards with consistent contact and reduced rework from uneven sanding.
The PM2244 precut abrasive 80 grit uses aluminum oxide, which provides a cutting surface suited to heavy-duty all-purpose sanding in typical woodworking shop applications.
The open coat construction provides non-loading properties, so dust has more room to escape between grains, which reduces clogging and helps maintain consistent cutting action.
The resin bonded design allows maximum grain retention, so abrasive particles stay attached to the backing under load, supporting longer use before performance drops.
The heavy-duty X weight cloth backing adds strength, so the abrasive resists tearing and stretching as it wraps and tracks on the PM2244 drum during sanding.
The anti-static backing allows easier dust pickup, so sanding dust releases more readily toward dust collection, supporting a cleaner sanding path and work area.
The manufacturer part number is PM9-1792203, which directly ties this 80 grit precut abrasive to the Powermatic PM2244 for straightforward identification and reordering.
Choose this Powermatic PM2244 precut abrasive 80 grit when a heavy-duty all-purpose sanding setup is needed on the PM2244. The aluminum oxide construction, resin bonded grains, X weight cloth backing, and anti-static backing work together to support consistent stock removal with easier dust pickup. Using the PM9-1792203 part number streamlines repeat purchasing, so the same abrasive performance can be maintained across future sanding runs.
Sold In: 1 Package
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  JP1792244 Mfr# PM9-1792244 | Powermatic PM2244 Drum Sander 1-3/4HP 115V |