Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Powermatic PM2244 precut abrasive 100 grit is an aluminum oxide sanding abrasive designed for heavy-duty all-purpose sanding, so installers and shop crews can run typical stock prep without switching products between passes. The 100 grit cut levels surfaces while still refining the scratch pattern, which supports efficient sanding steps before finishing. The abrasive is supplied as precut material sized for the Powermatic PM2244, so techs do not spend time trimming rolls to fit that machine. Aluminum oxide construction supports demanding sanding where consistent stock removal on wood-based materials is needed across multiple workpieces.
The abrasive uses an open coat structure described for non-loading properties, which means sanding dust has more space between the grains, so the abrasive surface stays clearer as you work. That non-loading behavior keeps the cut more predictable on resinous or dust-heavy material. Powermatic Tools identifies the product under manufacturer part number PM9-1792204, giving purchasing teams a clear reference when reordering for multiple PM2244 sanders on the floor.
The abrasive is identified specifically as a PM2244 precut abrasive 100 grit, so it is sized to match the Powermatic PM2244 sanding machine without additional trimming, which speeds up abrasive changes. That direct fit reduces the time operators spend cutting and aligning generic abrasive material on the drum. The aluminum oxide grain works for heavy-duty all-purpose sanding, which aligns with the PM2244s role in handling a range of stock thicknesses and materials in a woodworking environment. The open coat, non-loading design supports steady sanding across full table widths because dust is less likely to build up on the abrasive face. With resin bonded grain and heavy-duty X weight cloth backing, the abrasive holds its structure as the PM2244 drum applies pressure, supporting smooth tracking.
The product is identified as aluminum oxide for heavy-duty all-purpose sanding, which lets the PM2244 handle both initial leveling and intermediate sanding on many woodworking projects. That broad applicability helps a single abrasive handle varied job tickets moving through the machine. With a 100 grit rating, the abrasive sits between coarse stock removal and fine finish sanding, so it can remove planer marks while still leaving a surface ready for finer grits. In real shop use, that reduces the number of grit changes needed between roughing and pre-finish passes. The open coat structure described for non-loading properties works with the machines sanding motion to move dust out of the cutting zone, so the abrasive can maintain its bite over longer runs. Anti-static backing for easier dust pickup complements dust collection systems by allowing dust to detach from the belt surface more readily, which supports clearer sightlines and cleaner machinery.
Resin bonded construction is specified for maximum grain retention, which means the abrasive particles stay locked into the backing as the PM2244 drum applies pressure over repeated passes. That secure bond helps keep the scratch pattern more uniform across large panels or multiple pieces in a batch. The heavy-duty X weight cloth backing is described as providing strength, so the belt resists stretching and tearing, which supports stable belt tracking and contact pressure during operation. Because the material is precut for the PM2244, belt alignment is straightforward, and the edges match the machines requirements, which helps avoid edge fray from overhanging material. Anti-static backing for easier dust pickup keeps dust from clinging as strongly to the belt, so extraction systems can pull debris away, which can support more consistent cutting and reduced dust accumulation on adjacent components over time.
The PM2244 precut abrasive 100 grit works for heavy-duty all-purpose sanding, so it can handle general stock leveling and intermediate surface preparation on woodworking projects.
The open coat structure provides non-loading properties, allowing dust to clear more easily during sanding, which keeps the abrasive cutting more consistently on longer machine passes.
The resin bonded construction is specified for maximum grain retention, so abrasive particles stay attached longer under sanding loads, supporting more uniform surface results between belt changes.
The heavy-duty X weight cloth backing provides strength, helping the abrasive resist tearing and stretching, which supports stable belt tracking on the PM2244 during repeated passes.
The anti-static backing is described for easier dust pickup, so dust extraction systems can remove particles more effectively, helping keep the abrasive surface and machine cleaner.
The product is identified as PM2244 precut abrasive 100 grit with manufacturer part PM9-1792204, so it is sized for use on the Powermatic PM2244 sanding machine.
This PM2244 precut abrasive 100 grit from Powermatic Tools pairs aluminum oxide heavy-duty all-purpose sanding performance with an open coat, non-loading structure, so one abrasive can cover a wide range of shop sanding tasks on the Powermatic PM2244. Resin bonded grain and heavy-duty X weight cloth backing provide strength and grain retention that support consistent results over multiple passes. Anti-static backing for easier dust pickup works with dust extraction, helping maintain a cleaner sanding environment around the machine. For teams running Powermatic PM2244 sanders, choosing the PM9-1792204 precut abrasive streamlines changeovers and supports steady production sanding.
Sold In: 1 Package
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  JP1792244 Mfr# PM9-1792244 | Powermatic PM2244 Drum Sander 1-3/4HP 115V |