Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Powermatic CNC Dust Shoe is a CNC machine dust collection attachment designed for Powermatic Tools CNC equipment. The shoe uses a 4 inch port to connect flexible collection hose, directing debris from the cutting area into a dust collection system, which helps keep the work zone clearer while the CNC runs. This PM-DS CNC DUST SHOE, identified by manufacturer part PM9-1797001, is part of the CNC Machines product class, so it is built specifically for CNC routing environments where chips and fine dust are generated continuously. Detachable bristles surround the cutting area, forming a moving barrier that stays close to the tool path and helps contain dust around the bit, which improves collection efficiency at the source. Because the bristles detach, the shoe can be opened for bit changes or cleaning access without disturbing the 4 inch port connection or the rest of the dust collection setup.
The 4 inch port to connect flexible collection hose gives the dust shoe a clear hookup point to common 4 inch dust collection hose, so installers can route hose from the shoe back to a dust collector using familiar fittings and layouts. By sizing the port at 4 inches, the design supports high-volume airflow typical in woodworking dust collection systems, which helps capture the continuous chip load from CNC operations. Around the cutting area, detachable bristles form the contact edge between the dust shoe and the work zone, so the shoe can move over varying material thickness while still guiding debris toward the port. When access is needed for tool changes or maintenance, the detachable bristles can be removed, letting technicians work around the spindle area without disturbing the main hose connection or overall dust plumbing.
This PM-DS CNC DUST SHOE is classified under CNC Machines, so it is intended for use on CNC equipment in woodworking or similar routing environments where a dedicated dust collection interface is required. In operation, the 4 inch port to connect flexible collection hose routes directly to a dust collection system, so as the CNC runs toolpaths, airflow at the shoe pulls chips and dust away from the spindle area. The detachable bristles form a flexible skirt that contacts or closely approaches the work surface, channeling airborne dust toward the suction path instead of letting it disperse across the table. Because the bristles surround the cutting zone, they help maintain consistent collection even as the spindle moves across the work envelope, which supports a clearer view of the workpiece and reduces debris buildup around clamps and fixtures.
The 4 inch port design standardizes the connection point to flexible collection hose, so once the hose run is set up, operators can rely on the same airflow pattern at the spindle for job after job without reworking the dust connection. Having a dedicated port on the shoe keeps the suction source fixed relative to the spindle, which stabilizes dust capture performance across different toolpaths and material types. The detachable bristles add another layer of repeatability: they provide a consistent physical barrier around the tool, so dust is always guided toward the intake area instead of escaping at the edge of the shoe. When the bristles wear or require cleaning, they can be detached and serviced, helping the shoe maintain its dust-channeling behavior over time. Together, the 4 inch port and detachable bristles structure create a predictable dust collection zone around the tool, which supports cleaner CNC machining workflows and reduces the frequency of clearing chips from the table between operations.
The Powermatic CNC Dust Shoe is designed to connect to a dust collection system and capture dust and chips around the CNC cutting area, helping keep the machine work zone cleaner during operation.
The Powermatic CNC Dust Shoe has a 4 inch port to connect flexible collection hose, so it ties into dust collection systems that use 4 inch hose runs for debris removal.
The Powermatic CNC Dust Shoe uses detachable bristles to form a flexible skirt around the cutting area, guiding dust toward the 4 inch port for more focused collection at the tool.
The PM9-1797001 part number identifies this specific PM-DS CNC DUST SHOE from Powermatic Tools, helping users match the correct dust shoe to their CNC setup when ordering.
The 4 inch port on the Powermatic CNC Dust Shoe connects directly to common flexible collection hose, streamlining dust plumbing so the CNC can run with consistent chip extraction at the spindle.
The Powermatic CNC Dust Shoe uses detachable bristles so users can access the cutting area for bit changes or cleaning and then reinstall the bristles to restore focused dust collection performance.
The Powermatic CNC Dust Shoe, with its 4 inch port to connect flexible collection hose and detachable bristles, offers a dust collection interface tailored to CNC Machines in continuous cutting environments. By tying directly into a 4 inch dust collection line, it channels debris from the spindle area into the system rather than across the table. The detachable bristles create a controlled collection zone around the cutter while still allowing access for maintenance when removed. For buyers who need a defined part number, this PM-DS CNC DUST SHOE is identified as PM9-1797001 from Powermatic Tools, providing a clear reference when specifying a dust shoe for Powermatic CNC setups.
Sold In: 1 Each