Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Powermatic PWBS-14CS 14 inch bandsaw gives you a precision-balanced, nine-spoke cast iron wheel that smooths blade travel so the cut line stays predictable on long or curved work. The 1.5HP, single-phase, 115/230V motor described as PWBS-14CS BNDSW, 1.5HP 1PH 115/230V provides the drive needed for a wide range of shop sawing tasks without bogging the workflow. Upper and lower dual ball bearing guides support the blade on both sides of the cut, which stabilizes the blade for accurate results when following layout lines. The stand and riser block configuration positions the machine at a working height that suits regular shop use and larger material. A chip blower keeps the cut line clear as you feed, so layout marks remain visible during the cut rather than getting buried in dust. The quick-release, precision T-square style rip fence with 4 inch resaw attachment supports straight ripping and controlled resawing.
The stand and riser block arrangement places the Powermatic Pwbs-14Cs 14 inch bandsaw at a working height suited to shop environments, which supports comfortable feeding and control during extended cutting sessions. Upper and lower dual ball bearing guides surround the blade near the work, so once set, they hold the blade in a consistent position and help reduce deflection while feeding stock. The precision-balanced, nine-spoke cast iron wheel keeps blade motion even, which lets adjustments at the guides and fence translate directly into the cut rather than fighting vibration. The CARTER quick tension lever lets you move between tensioned cutting and de-tensioned storage positions quickly, which encourages proper blade tensioning with each change. The T-square style rip fence locks along the table using a straight reference, giving a reliable guide for both rip cuts and use of the 4 inch resaw attachment.
The Powermatic Pwbs-14Cs 14 inch bandsaw with stand and riser block is positioned for woodworking shops that need accurate curve cutting, ripping, and resawing on a single machine. The 1.5HP, 1PH, 115/230V motor configuration provides the power level described for this saw, which supports regular use across common shop materials without constant adjustments to the drive system. The precision-balanced, nine-spoke cast iron wheel keeps the blade running smoothly, so template cuts and layout-driven work depend more on your line reading than on fighting machine shake. Chip blower airflow across the cut zone lets operators see the kerf and layout marks clearly, which helps when following tight radii or intricate patterns. The T-square style rip fence and 4 inch resaw attachment supply a straight reference for ripping and resaw operations, so a single setup can handle both curve work and dimensional work in the same area.
The upper and lower dual ball bearing guides on this Powermatic bandsaw hold the blade firmly near the work, which reduces side flex so repeat cuts on matching parts stay consistent. Because both guide sets support the blade, tension settings from the CARTER quick tension lever translate into steady tracking through the cut instead of twist or flutter. The de-tensions setting extends blade life during non-use, so frequently used blades retain their characteristics for more jobs, supporting consistent performance across runs. The nine-spoke cast iron wheel adds mass and balance to the blade path, which limits vibration that could show up as washboard surfaces on sawn edges. The precision T-square style rip fence engages the table with a fixed reference, so once squared, it maintains its relationship to the blade for repeat rips and resaw passes without constant micro-corrections. The 4 inch resaw attachment on the fence gives a taller bearing surface for resawing moves, which supports workpieces better and helps keep the cut vertical.
The Powermatic PWBS-14CS uses a precision-balanced, nine-spoke cast iron wheel, which smooths blade travel so cuts stay more consistent and surfaces show less vibration marking.
The upper and lower dual ball bearing guides support the blade near the work, which stabilizes it in the cut and helps reduce wandering, especially in thicker or denser material.
The CARTER quick tension lever lets you rapidly move between cutting tension and a de-tensioned position, which speeds blade changes and supports proper blade tension for each task.
The de-tensions setting relaxes blade tension during non-use, which reduces constant stress on the blade and helps it maintain its characteristics for a longer service interval.
The chip blower clears dust from the cut line, keeping layout marks visible so you can follow patterns or rip lines without losing sight of the kerf.
The quick-release T-square rip fence with 4 inch resaw attachment provides a straight, stable reference edge, supporting accurate rips and controlled resaw cuts on tall workpieces.
The Powermatic PWBS-14CS 14 inch bandsaw with stand and riser block combines a precision-balanced, nine-spoke cast iron wheel, dual ball bearing guides, and a 1.5HP, 1PH, 115/230V motor to support accurate shop cutting. The CARTER quick tension lever with de-tensions setting, chip blower, and quick-release T-square rip fence with 4 inch resaw attachment are configured to keep the blade running smoothly, the cut line visible, and the work supported. For shops that value predictable tracking and efficient blade changes in a single 14 inch bandsaw station, this Powermatic PM9-1791216K configuration aligns mechanical details with daily workflow demands.