Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Powermatic 54A 6 inch jointer gives you a 66 inch long adjustable infeed and outfeed bed setup mounted on dovetailed ways, so stock is supported over a long reference surface and table alignment stays controlled for accurate jointing work. The 1HP, 1 phase, 115/230V motor configuration matches the listed Powermatic 54A rating, which drives the cutterhead with enough power for typical 6 inch joining tasks in a small professional or serious hobby shop. The infeed and outfeed beds are described as adjustable, which lets you dial in depth of cut and maintain flush alignment between tables when setting up for edge or face jointing. Mounting the beds on dovetailed ways means the tables travel in a guided path, supporting consistent geometry between fence, cutterhead, and tables over time. The machine is identified as a Powermatic Tools jointer, giving it a defined role in a woodworking machinery lineup.
This Powermatic 54A jointer uses a 1HP, 1 phase, 115/230V motor rating, which ties the machine to standard shop power options and defines how it is integrated into a woodworking workspace. The 66 inch long infeed and outfeed beds provide the primary setup surface, so once the jointer is positioned in the shop, those tables become the reference for supporting and feeding workpieces. Adjustable infeed and outfeed beds allow you to establish the desired depth of cut by moving the infeed table while keeping the outfeed table at the finished cut height, which is a typical jointer workflow for achieving flat, aligned edges. The fine/quick adjustment lever on the infeed table provides both coarse positioning and precise final tuning of table height, so you can move from one cut depth to another efficiently while still dialing in a smooth finish. Dovetailed ways control the vertical and longitudinal movement of the tables, which helps maintain table-to-cutterhead alignment during adjustment.
This machine is specified as a Powermatic 54A 6 inch jointer in the jointers/planers product class, so it is intended for flattening and straightening board edges and faces within that 6 inch width range in woodworking shops. The 66 inch long adjustable infeed and outfeed beds mounted on dovetailed ways provide a stable support platform for feeding boards, which makes this jointer well suited to tasks such as preparing glue-line edges or straightening stock before planing. The two-way tilting fence with positive stops at 45 degrees and 90 degrees defines how the jointer handles angular cuts, allowing you to produce either square edges or consistent bevels without continuously searching for the correct angle. Conveniently mounted center fence controls place the angle and position adjustments near the operator, so fence movements fit naturally into the workflow at the center of the machine rather than requiring movement to one end. As a Powermatic Tools jointer in the machinery category, it functions as a core surfacing tool in a woodworking process where accurate reference faces are required before downstream operations.
The Powermatic 54A 6 inch jointer is described as available with either 40 four-sided carbide inserts for the helical cutterhead or a 3-blade, high-speed steel straight knife cutterhead, so the cutterhead configuration can be matched to the desired cutting approach. A helical cutterhead with 40 four-sided carbide inserts provides multiple cutting edges per insert, which supports rotating inserts when an edge wears and helps maintain consistent cutting performance over time. The 3-blade, high-speed steel straight knife cutterhead uses three knives working in sequence, giving a traditional straight-knife cut profile that suits users familiar with conventional jointer adjustments. The fine/quick adjustment lever on the infeed table allows you to pair the selected cutterhead style with precise depth-of-cut settings, so you can tune how aggressively the knives or inserts engage the material. The two-way tilting fence with positive stops at 45 degrees and 90 degrees works together with the cutterhead and table setup, because once the outfeed table height and fence angle are set, repeated passes produce the same angle and surface geometry from board to board. Dovetailed ways supporting the 66 inch adjustable infeed and outfeed beds stabilize the relationship between tables and cutterhead during these adjustments, which reinforces the repeatability of jointing operations. Conveniently mounted center fence controls help you fine-tune fence angle and position without leaving the primary operating area, maintaining consistent setup between runs.
The Powermatic 54A jointer has 66 inch long adjustable infeed and outfeed beds, giving extended support for boards during jointing so you can maintain straighter, flatter reference edges.
The Powermatic 54A jointer uses a fine/quick adjustment lever on the infeed table, allowing both rapid depth changes and precise tuning so you can set the cut for different jointing tasks.
The Powermatic 54A jointer is available with 40 four-sided carbide inserts for a helical cutterhead or a 3-blade, high-speed steel straight knife cutterhead, so you can match the cut style to your preference.
The Powermatic 54A jointer has a two-way tilting fence with positive stops at 45 degrees and 90 degrees, allowing quick setup for square or bevel jointing without hunting for the angle.
The Powermatic 54A jointer has conveniently mounted center fence controls, placing fence adjustments near the operator so angle and position changes integrate smoothly into the workflow.
The Powermatic 54A jointer with part number PM9-1791279DXK is specified as a 1HP, 1 phase, 115/230V machine, defining its motor capacity and electrical connection requirements.
The Powermatic 54A 6 inch jointer combines a 66 inch long adjustable infeed and outfeed bed set on dovetailed ways with a 1HP, 1 phase, 115/230V motor, giving you a defined, stable platform for everyday jointing operations. With available helical cutterhead using 40 four-sided carbide inserts or a 3-blade, high-speed steel straight knife cutterhead, the machine supports either modern insert-style cutting or traditional straight-knife work. The fine/quick adjustment lever on the infeed table, together with the two-way tilting fence with positive stops at 45 degrees and 90 degrees and conveniently mounted center fence controls, provides a controllable, repeatable setup for square or bevel edges. For a jointer in the machinery jointers/planers class from Powermatic Tools, this configuration helps organize your surfacing workflow around a consistent, known machine.