Powermatic PM2800B drill press delivers mechanical variable speed, so the spindle speed range is fully adjustable without belt changes, which keeps drilling setups faster when switching between materials or bit sizes. The drill press provides 6 inches of quill travel in a single revolution of the handle, allowing deeper holes or stacked work to be drilled in one smooth motion. A digital readout with a range of 250 to 3,000 rpm displays spindle speed clearly, helping the operator match speed to the drilling application. Laser guides show an accurate indication of the tool point entry, which helps position the workpiece before drilling. A redesigned high output LED lighting system reduces shadows on the work area, so layout lines stay visible at the bit. An oversize cast iron base adds stability to the machine during drilling operations.
The Powermatic PM2800B drill press operates on 1 horsepower, single phase power at 115 or 230 volts, so it can be wired to common shop electrical systems. Reversible handles mount on either side of the machine, letting the operator choose the working side for the quill. The work table rotates to a full 90 degree position, so the drilling surface can be set for vertical or angled work. A replaceable square table insert uses leveling screws to sit flush with the table top, supporting flat stock under the bit. The oversize cast iron base adds mass at floor level, helping the drill press stay steady when the quill is extended. A safety key in the switch prevents accidental starting, controlling when the machine is powered on in the shop.
The Powermatic PM2800B drill press sits in the drilling, doweling, and boring category, so it fits into woodworking workflows that require repeatable holes. The fence system adjusts to a perfect 90 degree relationship to the table, giving a straight reference for drilling along panel edges, rails, or stiles. An adjustable material stop on the fence positions workpieces to the same location each time, which supports runs of cabinet parts or repeated dowel holes. The work table rotates to a full 90 degree position, allowing drilling into parts that need angled or edge access without changing jigs. A replaceable square table insert with leveling screws stays flush to the table surface, so flat stock remains supported around the bit during through-drilling. Laser guides indicate the tool point entry before drilling starts, which helps align centerlines on face frames, shelves, or jigs to the bit.
Mechanical variable speed on the PM2800B allows a continuous speed range without belt changes, so operators can tune spindle rpm to match bit diameter or material density while staying at the machine. The digital readout showing 250 to 3,000 rpm provides a visual reference, making it simple to return to a known speed that worked well on a previous job. Six inches of quill travel in one handle revolution keeps long or stacked work within a single stroke, reducing the chance of misalignment that can occur when repositioning mid-hole. Reversible handles mount on either side of the drill press, letting different users choose the most comfortable quill control for their station layout. Redesigned high output LED lighting reduces shadows on the work area, so layout marks stay visible at the exact drilling point. The oversize cast iron base adds stability to the column and head, which supports more consistent hole positioning when drilling larger or heavier pieces.
The Powermatic PM2800B drill press is a drilling, doweling, and boring machine, so it handles hole-making tasks typically needed in woodworking and related shop work.
The PM2800B drill press uses mechanical variable speed, letting the operator adjust spindle rpm across the full range without belt changes for faster job-to-job transitions.
The Powermatic PM2800B drill press offers 6 inches of quill travel with one revolution of the handle, allowing deeper holes to be drilled in a single stroke.
The PM2800B fence adjusts to a 90 degree relationship to the table and uses an adjustable material stop, so repeated parts can be positioned consistently for matching hole locations.
The drill press digital readout shows spindle speeds from 250 to 3,000 rpm, helping the operator select and repeat appropriate speed settings for different drilling tasks.
The PM2800B drill press uses laser guides to mark tool point entry and redesigned high output LED lighting to reduce shadows, keeping layout marks visible under the bit.
The Powermatic PM2800B drill press combines mechanical variable speed, a 250 to 3,000 rpm digital readout, and 6 inches of quill travel to handle varied drilling tasks in one station. The adjustable 90 degree fence, material stop, and rotating work table support straight and angled boring on repeated parts. Laser guides, high output LED lighting, and a flush table insert help align layout marks at the bit. An oversize cast iron base and safety key add stability and controlled starting for shop use. Select this PM2800B drill press when a dedicated drilling, doweling, and boring machine is needed for consistent, repeatable results.