Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Powermatic 4" Elbow Fitting directs dust collection airflow around a corner in a dust collection run, so dust from machines can be carried away when the layout requires a change in direction. As a dust collection component in the Machinery Dust Collectors category, it serves as a shaped transition that helps connect 4 inch dust collection lines where a straight pipe cannot follow the machine layout. The elbow fitting works as part of a dust collection system to route debris from woodworking equipment toward the dust collector, which supports cleaner machine operation in woodworking shops. Branded under JET Tools within the Dust Collection product class, this elbow fitting ties into JET and Powermatic dust collection setups where a 4 inch elbow configuration is needed to complete the run.
The Powermatic 4" Elbow Fitting functions wherever a 4 inch dust collection line needs to change direction between a woodworking machine and a dust collector, so installers can route hose or pipe along walls or ceilings. As a dust collection component in the Machinery Dust Collectors category, it is meant to be used in systems built around woodworking machines rather than general building ventilation, which keeps the layout focused on capturing dust at the source. The 4 inch sizing noted in the SAP description "4' ELBOW" aligns with typical 4 inch dust ports, so the fitting can be used where that duct size is already part of the run.
The Powermatic 4" Elbow Fitting is used in dust collection lines serving woodworking machinery, matching its placement in the Machinery Dust Collectors category so it fits into systems centered around table saws, planers, and similar equipment. As a Dust Collection product, it belongs in the section of the system that moves dust and chips from the machine area toward the collector, not in compressed air or liquid lines. The 4 inch sizing referenced in the SAP description and product name suits dust collection layouts that standardize on 4 inch ducting, which simplifies planning multiple machine drops on the same trunk line. Because it is an elbow fitting rather than a straight fitting, it serves locations where the duct must bend around machines, walls, or ceiling structures while maintaining a defined dust path.
The Powermatic 4" Elbow Fitting, identified by manufacturer part number JT9-JW1017, gives installers a specific component reference when planning or documenting a dust collection system, which supports consistent replacement or expansion using the same part. Its classification as a Dust Collection product means it is intended to work in dust and chip transport, helping maintain a continuous path so dust can be carried away from woodworking machines. The 4 inch elbow size lets the same duct diameter be maintained through the turn, which helps keep the system layout simple by avoiding immediate transitions to other sizes at corners. Being branded under JET Tools and described as a Powermatic 4" Elbow Fitting ties this elbow to recognized machinery and dust collection lines, which can matter when building a system with parts identified to those brands.
The Powermatic 4" Elbow Fitting routes 4 inch dust collection lines around a corner, so dust from woodworking machinery can be directed toward a dust collector when the run cannot remain straight.
The Powermatic 4" Elbow Fitting is classified in the Dust Collection product class and Machinery Dust Collectors category, so it is designed for dust collection systems serving woodworking machinery.
The 4" in Powermatic 4" Elbow Fitting identifies it as a 4 inch elbow, which matches dust collection runs that are built around 4 inch ducting commonly used with many machines.
Manufacturer part JT9-JW1017 uniquely identifies this Powermatic 4" Elbow Fitting, which helps buyers match the exact elbow fitting when planning systems or replacing an existing part.
The Powermatic 4" Elbow Fitting is listed in the Dust Collection product class and Machinery Dust Collectors category, which indicates its intended use is dust collection rather than general HVAC.
The Powermatic 4" Elbow Fitting lets a 4 inch dust collection line turn while staying in the same size, which supports cleaner routing around equipment, walls, and ceilings.
The Powermatic 4" Elbow Fitting from JET Tools, part of the Dust Collection product class and Machinery Dust Collectors category, offers a 4 inch elbow configuration for directing dust collection lines. Using manufacturer part number JT9-JW1017 as the reference for this 4" Elbow Fitting helps align dust collection layouts that rely on 4 inch ducting around woodworking machinery. For shop dust runs that need a defined turn while remaining in a dust collection-focused component family, this Powermatic 4" Elbow Fitting provides a clearly identified option.