
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
T626 60W LED plug-in power supply delivers 12 Volt DC output at a constant voltage 60 Watt rating, so LED runs stay within the driver capacity on typical cabinet or display installations. The unit is a slim design under 1 inch in height, which lets installers tuck it behind cabinets or under shelving where vertical clearance is limited. The power supply is Class 2 and UL Listed, giving a defined output class for projects that call for recognized low-voltage components. This model is dimmable on the trailing edge on the 12 Volt side, so it can be used with compatible low-voltage dimming controls placed after the driver. The product is not compatible with hardwire wall dimmers, which keeps the control strategy focused on the low-voltage side instead of line-voltage controls. The power supply is black, allowing it to blend into dark casework and shadow lines.
The 6 port block on this power supply serves as a mounting block and connection hub, so installers can fasten one component and then land multiple low-voltage outputs from that point. The trailing edge dimmable function on the 12 Volt side supports low-voltage dimming setups where the control is downstream of the driver instead of on the line side. Because the unit is not compatible with hardwire wall dimmers, projects rely on controls designed for the 12 Volt side, keeping the driver within its intended operating method. The slim design under 1 inch height gives flexibility in routing the driver behind trim, within shallow recesses, or above cabinet tops. The black housing helps the unit visually disappear in darker enclosures and casework interiors.
This Tresco Lighting power supply with 12 Volt DC output is suited to LED fixtures that operate at that voltage and load level, giving a matching driver for those lighting runs. The 6 port block concentrates up to six low-voltage connections at one hub, which suits multi-fixture cabinet, shelving, or display layouts driven from a single location. Class 2 construction and UL Listing place the unit in a defined safety category, aligning it with low-voltage lighting installations that call for recognized components. The slim profile under 1 inch height helps it fit behind cabinet backs, under counters, or in narrow channels where bulkier drivers are hard to place. The black finish visually recedes in dark interiors or under-shelf shadows, supporting cleaner finished work.
The constant voltage 60 Watt rating and 12 Volt DC output define how long a run of compatible LED fixtures can be supported, helping installers plan circuits without overloading the driver. High power factor greater than .95 improves electrical performance of the driver on the line side, which can be important on larger commercial circuits with multiple loads. Short circuit and overload protection with automatic reset let the unit recover from temporary wiring faults or load issues without fuse replacement, reducing time spent on troubleshooting. Added overcurrent protection further safeguards the connected LED fixtures, supporting consistent operation under normal use. RFI protection matters in shops, offices, or residential spaces where lighting drivers share space with audio systems or wireless equipment. The trailing edge dimmable function on the 12 Volt side supports smooth low-voltage dimming when paired with appropriate controls downstream of the power supply.
The T626 60W LED plug-in power supply provides 12 Volt DC output at constant voltage, which suits LED fixtures designed for that voltage and supports stable light levels across the run.
The power supply is rated at 60 Watt constant voltage, so connected 12 Volt DC LED loads are planned within that wattage for proper driver operation in typical installations.
The 6 port block provides a central hub to connect multiple LED fixtures, allowing installers to route several low-voltage leads into one organized mounting location.
The power supply is dimmable on the trailing edge on the 12 Volt side, so dimming takes place on the low-voltage output rather than through a hardwire wall dimmer.
The driver is Class 2 and UL Listed, placing it within a defined low-voltage category that aligns with many LED lighting safety and code expectations.
The driver provides short circuit, overload, overcurrent, and RFI protection with automatic reset, supporting dependable operation and reducing manual intervention after temporary faults.
The T626 60W LED plug-in power supply from Tresco Lighting combines 12 Volt DC constant voltage output, a 60 Watt load rating, and a 6 port mounting block to support multi-point LED layouts from a single driver. Class 2 UL Listing, high power factor greater than .95, and built-in short circuit, overload, overcurrent, and RFI protection give a defined performance and safety profile for cabinet, display, or casework lighting. The slim design under 1 inch height and black finish help the unit integrate into tight or low-visibility spaces. For LED projects that match its 12 Volt DC operation and wattage range, this driver provides a focused solution for powering and organizing multiple fixtures.
Sold In: 1 Each