
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
T628 LED warm white flex tape gives a 16.4 foot roll of Tresco Lighting tape that delivers 1.5 watts per foot, so you get consistent 12V lighting output along cabinets, shelving, or casework runs without mixing different strips. The 3000K warm white color means the tape produces a warm tone, which helps create comfortable task or accent lighting in residential or commercial woodwork. Being part of Tresco Lighting LED tape lighting, it keeps the same performance profile across a project, which simplifies matching light color and intensity between locations. The tape format makes it suitable wherever a low profile light source is needed, because it follows straight lines or gentle curves along the mounting surface. With average rated life of 25,000 hours, the tape supports long-term installations where access for frequent changeouts is not desirable.
This Tresco Lighting flex tape uses a 3M adhesive peel and stick back, so the installer presses the tape directly onto the chosen substrate for a continuous bond along the run. The tape can be cut every 3 inches, which means the installer trims only at marked intervals to maintain electrical integrity of each section. With a 20 foot maximum length for a continuous run, the layout can be planned in segments that keep each powered section within that limit for consistent brightness. The rated 1.5 watts per foot power draw allows quick calculation of total watts per run, so a matching Tresco transformer and cables can be selected within their designed load ranges.
This 20 foot LED tape roll works in layouts that benefit from a single continuous 12V run, because the stocked 20 foot length aligns with the maximum continuous run rating. The 3000K warm white LED tape light suits applications where a warm appearance is desired, such as under cabinets or inside millwork, since the color temperature avoids a cold look on wood surfaces. Being LED tape lighting from Tresco Lighting, it integrates into systems that already use Tresco fixtures, which keeps color and output characteristics unified across multiple areas. The ability to cut the tape every 3 inches lets the installer adapt the same roll to different cabinet or niche sizes on one job, helping standardize parts while still fitting varied dimensions.
The 1.5 watt per foot rating means every segment of tape taken from the roll has predictable load, so repeating a design across several cabinets only requires multiplying length to confirm transformer capacity. The 20 foot maximum length for a continuous run sets a clear design rule, which helps keep every installed run performing similarly in light output. The 3M adhesive peel and stick back offers the same bonding approach every time, so installers follow a repeatable press-down workflow instead of alternating between clips and fasteners on different projects. The option to use straight feed, t-connector or right-angle connector supports consistent routing at turns or branches, because each connection type aligns with a specific direction change or split. Link cords in 2, 6, 10, 24, 48 and 72 inch lengths provide standardized offsets between tape sections, allowing repeat layouts inside similar cabinet banks while keeping wiring paths orderly.
This T628 LED warm white flex tape is stocked in a 20 foot roll, so one roll covers up to the full 20 foot maximum continuous run using a single length.
The flex tape uses 1.5 watts per foot, which allows straightforward calculation of total wattage by multiplying tape length to match with a suitable 12V power source.
The LED tape is rated 3000K warm white, providing a warm tone that complements many cabinet and woodworking finishes for comfortable general or accent lighting.
The tape can be cut every 3 inches, so runs can be trimmed closely to cabinet or shelf sizes while keeping each section electrically functional at the cut points.
The LED flex tape has a 20 foot maximum length for a continuous run, which defines how long a single powered segment can be laid out from one feed.
This Tresco Lighting flex tape is designed to operate with genuine Tresco transformers, power cables, connecting cables and switches for proper system performance.
This T628 LED warm white flex tape from Tresco Lighting offers a 20 foot roll, 1.5 watts per foot load, and 3000K warm white output, giving installers a consistent 12V tape lighting choice for continuous runs. With tape cut capability every 3 inches, 20 foot maximum continuous length, and 3M adhesive peel and stick back, it assembles into clean undercabinet or casework lighting layouts. Choosing this flex tape for projects that can use Tresco transformers, power cables, connecting cables and switches keeps the system within its intended operating design.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSL-DCE60D-CON-1 Mfr# L-DCE60D-CON-1 | 60W Hardwire Power Supply, 6-11/16", Black | ||||
Sold in: 1 Each | RSLLEDTPELNKTEE-1 Mfr# L-LED-TPELNK-TEE-1 | Tee FlexTape Link Connector, 1-1/2" | ||||
Sold in: 1 Each | RSLLEDTPELNK25-1 Mfr# L-LED-TPELNK-25-1 | FlexTape Linking Cord, 10" |