FlexTape T629 LED Strip Light For Projects

FlexTape T629 LED strip light delivers a 10 foot roll of warm white 3000K lighting, giving installers a ready length that suits runs under cabinets, shelves, or displays without piecing together multiple short sections. The 12V design works within typical low-voltage lighting layouts, so it fits into standard LED power setups on shop builds or retrofit jobs. At 5.5 watts per foot, this LED tape provides significant light output per linear foot, which matters when you need consistent illumination along longer runs without dark spots. The tape uses warm white 3000K LEDs that create a softer tone, matching many residential and light commercial interiors where harsh cool light is not desired. Average rated life of 50,000 hours means the strip is designed to run for many hours before replacement, which supports long service intervals on built-in cabinetry or millwork lighting.

Key LED Tape Details For Daily Work

• The LED tape is stocked in 10 foot rolls, so planning runs up to that length on a single reel simplifies layout and reduces seams along cabinets or display fixtures.
• Power draw of 5.5 watts per foot lets you calculate load per run quickly, streamlining transformer sizing and helping keep low-voltage circuits within expected limits.
• The back of the tape uses 3M adhesive with a peel and stick design, providing a direct mount option to clean surfaces and speeding installation on flat cabinet bottoms or channels.
• The tape can be cut every 3 inches, so you can trim to exact lengths at marked points, aligning light precisely with cabinet widths, shelves, or niches.
• The system supports a 20 foot maximum length for a continuous run, allowing you to link sections within that limit to keep voltage drop and light levels in a predictable working range.
• Link cords are available in lengths of 2, 6, 10, 24, 48, and 72 inches, which allows spacing and routing around obstacles while maintaining connection between tape segments in a layout.

Installation Details For Tresco FlexTape T629

This Tresco Lighting LED tape uses a 3M adhesive peel and stick back, which lets you mount the tape directly along cabinet frames, shelves, or channels without separate mechanical clips. The 12V rating keeps it within standard low-voltage lighting systems, so it integrates into existing Tresco transformer and cable layouts. The tape can be cut every 3 inches, giving you fixed cut points that align with common cabinet module sizes and help avoid overhanging light beyond a finished edge. A 20 foot maximum length for one continuous run defines how much tape can be powered in series, guiding layout into single or multiple runs to keep performance consistent.

Using FlexTape T629 LED Tape In Projects

Where FlexTape T629 LED Strip Light Fits

The 10 foot roll format fits situations where a single, uninterrupted LED line is needed under a row of cabinets, inside a long display, or along shelving. Warm white 3000K output suits kitchens, baths, and casework where a softer tone is preferred over cooler light. The low heat rating noted in the description means the tape operates with reduced temperature compared to many traditional sources, which matters when installing close to wood, laminates, or other finish materials that benefit from lower thermal impact. Being part of Tresco Lighting LED tape lighting, this strip aligns with woodworking and cabinet environments served by Wurth Baer Supply, making it a practical match for millwork and fixture builds that already rely on similar components.

Details That Support Reliable LED Tape Results

The ability to cut the tape every 3 inches allows you to match light length closely to project dimensions, reducing shadow gaps at ends of cabinets and minimizing wasted tape. The specified 20 foot maximum continuous run informs how long you can link tape segments before starting a new feed, helping maintain even brightness along the entire run. Link cords available in 2, 6, 10, 24, 48, and 72 inch lengths provide options for jumping gaps, turning corners, or bridging between separated cabinets while keeping the lighting circuit intact. The tape can be inserted into straight feed, T-connector, or right-angle connector, giving you clear connection points to branch runs, change direction, or feed from different locations based on layout constraints. The average rated life of 50,000 hours supports long-term use in fixed installations like built-in cabinetry, reducing the frequency of lighting change-outs once the tape is installed.

Common Questions About FlexTape T629 LED Strip

Select FlexTape T629 LED Tape For Your Layout

FlexTape T629 LED strip light from Tresco Lighting combines a 10 foot roll length, 12V operation, and 5.5 watts per foot output to support many under-cabinet and display runs. Warm white 3000K light, cut points every 3 inches, and a 20 foot maximum continuous run give you clear parameters when designing layouts. The 3M adhesive peel and stick back streamlines mounting along cabinetry and casework, while the 50,000 hour average rated life supports long-term use. For woodworking and cabinet projects sourced through Wurth Baer Supply, this LED tape offers a defined, low-voltage lighting option ready to integrate into Tresco-based systems.