EquiLine FlexTape T641 LED 4.4W Neutral White Strip Light, 13' Roll, White

EquiLine FlexTape T641 LED Strip For Runs

EquiLine FlexTape T641 LED strip light is a 13 foot roll of Tresco Lighting LED tape lighting rated at 12V and 4.4 watts per foot, which delivers a consistent powered run that suits typical cabinet and casework projects. The 3500K neutral white output creates balanced light that works well where color differentiation on surfaces matters, while avoiding overly warm or cool tone shifts on worktops. The strip is stocked in 13 foot rolls, giving a predictable length to plan runs along shelves, valances, or display areas without guessing at footage. Average rated life of 25,000 hours means the tape is designed for long service intervals, which reduces the frequency of replacement in built-in installations.

Key LED Tape Details For Project Planning

• The 13 foot roll format provides a continuous length that supports longer straight runs in cabinets or displays, which simplifies layout when routing channels or planning power locations.
• The 12V rating aligns with low-voltage lighting layouts, allowing the tape to tie into common 12V systems in casework or furniture projects without changing voltage strategy.
• Power consumption of 4.4 watts per foot defines load per run, which helps size Tresco transformers and design circuits so the system operates within capacity under normal use.
• The 3500K neutral white color temperature provides balanced illumination on woods, laminates, and solid surfaces, which supports consistent visual appearance across adjoining cabinets and work areas.
• Average rated life of 25,000 hours supports long-term use in built-in applications, which is valuable when the tape is installed behind trim or diffusion where access is limited after installation.

LED Tape Installation And Cut-to-Length Use

The 3M adhesive peel and stick back provides a ready-to-bond surface along the LED tape, which lets installers press the strip directly to prepared substrates without separate adhesive steps. Tape that can be cut every 1 inch gives fine control over final length, which helps finish runs near cabinet edges or obstacles with minimal dark gaps. The cut points tie into the connector system, which means the trimmed sections can transition cleanly into straight feed, t-connector, or right-angle connector layouts as needed by the cabinet or display geometry.

Using Tresco LED Tape In Real Projects

Where This 13ft Neutral White Tape Fits

The EquiLine FlexTape T641 LED 4.4W neutral white strip light works well in projects that call for a defined 13 foot run, because the stocked roll length matches many standard cabinet and shelving groupings. The 3500K neutral white LED tape supports applications where reasonably accurate color appearance of finishes is important, such as undercabinet lighting in kitchens, casework in offices, or display shelving in retail environments. Its classification as LED tape lighting places it in a flexible lighting category, so it can follow straight cabinet valances or shelf undersides where linear light is needed. The low heat referenced in the description means the tape is suitable for tight millwork spaces where temperature rise needs to remain modest during normal operation around typical woodworking materials. Because the product is identified specifically as EquiLine FlexTape T641 under Tresco Lighting, it slots logically into projects already using Tresco components.

Details That Support Reliable Tape Layouts

The ability to cut the tape every 1 inch allows very incremental length adjustments, which reduces leftover gaps or overhangs at the end of a run and supports neat terminations at stiles, dividers, or cabinet ends. The fact that tape can be easily inserted into any one of three connectors - straight feed, t-connector, or right-angle connector - provides defined options for routing around corners or branching runs, which simplifies planning light distribution across multi-section installations. Using Tresco accessories with Tresco fixtures is recommended in the description, and this alignment supports consistent mechanical and electrical connection between the EquiLine FlexTape and the specified Tresco transformers, power cables, connecting cables, and switches. The 12V rating, combined with clearly stated power consumption of 4.4 watts per foot, lets installers calculate total load against Tresco transformers, which helps design systems that operate within the intended electrical range. The 25,000 hour average rated life means the tape is designed with an extended service window, which supports long-term performance in built-in woodworking where replacing tape would require disassembling trim or panels.

Common Questions About This EquiLine FlexTape

Selecting This Tape For 12V Neutral White Runs

The EquiLine FlexTape T641 LED 4.4W neutral white strip light combines a 13 foot roll length, 12V operation, and 4.4 watts per foot load, which gives clear parameters for designing runs. The 3500K neutral white output and 25,000 hour average rated life support long-term use in cabinets, shelving, and displays. With cut points every 1 inch and compatibility with straight feed, t-connector, or right-angle connector layouts, this Tresco Lighting tape presents a defined option when planning linear LED lighting within woodworking projects.