EquiLine FlexTape T642 LED 4.4W Cool White Strip Light, 13' Roll, White

EquiLine FlexTape Cool White LED Strip Lighting

EquiLine FlexTape T642 LED 4.4W cool white strip light provides a 13 foot roll of LED tape lighting that delivers consistent illumination across cabinetry, displays, or work areas where linear light is needed. This Tresco Lighting tape is a 12V system rated at 4.4 watts per foot, which provides defined light output while helping manage power planning across longer runs. The 4800K cool white color creates a neutral, bright tone that supports task visibility in shop, office, or residential millwork applications where clear light is preferred over warm tones. As part of the Tresco Lighting LED tape lighting class, this product works as a flexible linear light source that follows cabinet runs, shelving edges, or architectural details with minimal profile impact. The 13 foot length stocked in rolls gives installers enough continuous tape for many common cabinet or display runs without frequent splices along the line.

LED Tape Details That Support Daily Install Work

• The 13 foot roll length provides a continuous run for many cabinet or shelving layouts, which reduces connection points along straight sections and supports cleaner installation lines.
• The 12V design aligns with common low-voltage lighting layouts, which allows the tape to integrate into established Tresco Lighting systems that already use compatible voltage.
• The 4.4 watts per foot load rating lets installers plan transformer capacity more accurately, which helps size Tresco transformers and circuits to the actual tape length in a run.
• The 4800K cool white output provides a bright, neutral color tone, which supports visibility on work surfaces and product displays where color clarity and contrast are important.
• The EquiLine FlexTape T642 identity and Tresco Lighting branding tie this tape to a known LED tape lighting family, which helps align it with other Tresco fixtures specified on the same project.

Peel And Stick LED Tape Mounting Workflow

The 3M adhesive peel and stick back creates a simple mounting method, as the tape adheres directly to suitable surfaces without separate mounting channels. This backing turns the LED tape into a ready-to-place strip that can follow the line of cabinets, shelving, or valances with only backing removal and positioning. Tape that can be cut every 1 inch allows installers to trim the run closely to actual field measurements, which helps terminate tape near corners, dividers, or cabinet ends without leaving long overhangs. Being stocked in 13 foot rolls keeps handling straightforward on the job, since the tape comes as a single continuous length that can be rolled out, measured, marked, and then cut at the 1 inch intervals as needed.

Using EquiLine FlexTape In Real Install Projects

Where This Tresco LED Tape Is Typically Applied

This Tresco Lighting EquiLine FlexTape T642 LED 4.4W cool white strip light is part of an LED tape lighting product class suited to applications that need linear, low-profile light. The cool white 4800K color temperature supports use in areas where bright, neutral light helps emphasize edges and working surfaces, such as undercabinet runs or interior cabinet lighting. The 13 foot roll format allows it to stretch along longer continuous sections of casework or display fixtures, so one length can serve multiple adjacent openings along the same line. Because the tape can be cut every 1 inch, it can follow irregular cabinet layouts or sectional shelving without leaving dark gaps at the ends. The 12V format lets it slot into low-voltage lighting plans that already specify Tresco systems using matching voltage across various fixtures.

Details That Help Achieve Consistent Tape Installations

The 3M adhesive peel and stick back changes installation from a multi-part mounting step to a single-surface bonding action, which supports faster runs along cabinets while maintaining contact along the tape length. Tape cut points at every 1 inch give tight control over final length, which helps align the end of the LED tape with stiles, partitions, or corners for a finished appearance. Being easily inserted into any one of three connector options - straight feed, t-connector, or right-angle connector - allows the tape to handle directional changes and branching runs without complicated splicing. A straight feed connector supports simple end-to-end or power feed connections, while a t-connector lets one run branch into two directions from a single point. The right-angle connector supports 90-degree changes such as turning a corner inside a cabinet run. The average rated life of 25,000 hours describes the operating duration the LEDs are designed for, which reduces the frequency of fixture replacement in normal use cycles. Low heat operation described in the product data supports installation in tight cabinet or millwork spaces, because the tape contributes less thermal load to enclosed or decorative areas.

Common EquiLine FlexTape LED Buyer Questions

Choose This EquiLine FlexTape For Linear LED Runs

The EquiLine FlexTape T642 LED 4.4W cool white strip light pairs a 13 foot roll length with 4.4 watts per foot and 12V operation, giving a defined load profile for linear lighting projects. The 4800K cool white tone, 3M adhesive peel and stick back, and cut points every 1 inch combine to support precise placement along cabinets, shelving, or fixtures. Straight feed, t-connector, and right-angle connector compatibility extends layout options for directional changes. At Wurth Baer Supply, this Tresco Lighting tape lighting solution is positioned for installers who need a low-heat, 25,000 hour rated tape for consistent, repeatable LED runs.