LED 3W Neutral White Tape Light For Runs

LED 3W Neutral White Tape Light, 16.4' Roll delivers 3 watts per foot at 12V, providing a consistent output across the entire run that supports predictable lighting levels along cabinets, shelves, or similar straight applications where even illumination matters.

The 3000K neutral white color listed in the description produces a balanced tone that helps keep work areas and display spaces from looking overly cool or warm, which is useful when trying to match surrounding finishes and surfaces in woodworking projects.

The 16.4' roll length stated in the product data defines the span available from a single piece, which helps plan straight runs or segments without splicing beyond the stated maximum length for a continuous run.

The LED tape is identified as Tresco Lighting product L-TPELED-30HER-1, which ties this roll specifically to Tresco transformers, power cables, connecting cables, switches, and Tresco accessories referenced in the note for system consistency.

Key LED Tape Light Details For Planning

• The tape is stocked in 16.4' rolls, so longer installations can be broken into predictable segments that match the stated maximum length for a continuous run when laying out multiple straight or cornered sections.
• The strip operates at 3 watts per foot, which allows straightforward load calculations when pairing runs with Tresco transformers and related power components referenced in the product description.
• The tape uses a 3M adhesive peel and stick back for easy installation, so once a surface is prepared, the installer can press the strip in place without separate mounting tracks for many common cabinet or casework locations.
• The tape can be cut every 3" according to the description, giving flexibility to size sections precisely to cabinet bays, shelves, or shorter runs while respecting the defined cut points.
• The description notes a 16.4' maximum length for a continuous run, which sets a clear upper limit when designing a layout to maintain intended performance across connected sections.
• Average rated life is stated as 25,000 hours, so in typical intermittent cabinet or accent use, the tape can serve for extended periods before reaching its rated service window.

Installation And Layout Details For This Tape

The 3M adhesive peel and stick back referenced in the web description lets the tape bond directly to a suitable surface, which streamlines installation on cabinet interiors, undersides, or similar linear mounting areas where direct contact is possible.

The ability to cut the tape every 3" gives defined points to shorten or segment runs, so installers can match individual cabinet or display sections without relying on guesswork between cut locations.

The description states that the tape can be easily inserted into any one of three connectors - straight feed, t-connector, or right-angle connector - which supports different layout shapes, including straight runs, branches, and corners.

The 16.4' maximum length for a continuous run keeps the layout within the specified limit, helping maintain consistent performance along the tape when planning how many segments can be powered together in a line.

Using This Tresco LED Tape In Real Projects

Where This 16.4 Foot LED Tape Works Best

The product is classified as LED Tape Lighting in the lighting category, which positions it for linear applications such as under-cabinet, casework, or shelving where a low-profile strip is preferred over bulkier fixtures.

The 16.4' roll length lends itself to full-length counter or shelf runs, because a single roll can span many typical residential or light commercial cabinet lines without exceeding the maximum continuous run length stated.

The 3000K neutral white color described as part of the 16.4FT ROLL,12V,3W/FT,EQU-TAPE,3000K specification is suited to areas where a warm yet balanced tone is desired, helping maintain natural appearance of woods, laminates, and solid surfaces.

The Tresco brand and reference to Tresco fixtures within the note link this tape to Tresco transformers, power cables, connecting cables, and switches, so it fits into a unified Tresco system design when planning lighting within the same product family.

The low heat noted in the description means the tape operates with reduced temperature rise under normal use, which is helpful when running lighting close to wood, laminate, or other finish materials common in cabinets and casework.

Details That Support Reliable LED Tape Results

The 3 watts per foot rating allows installers to total wattage for each run simply by multiplying length by 3, which aids in selecting Tresco transformers with adequate capacity while staying within circuit limitations.

The ability to cut the tape every 3" establishes exact modular increments, so sections can be designed to repeat consistently across multiple similar cabinet bays or shelves, keeping visual alignment uniform.

The three connector options listed - straight feed, t-connector, and right-angle connector - support various junction conditions, enabling clean transitions at corners or branches without improvising connection geometry.

Category placement as LED Tape Lighting indicates a flexible strip format, which is useful where a concealed linear source is required behind trims, in recesses, or along undersides, allowing light output without large fixture footprints.

The stated average rated life of 25,000 hours helps estimate service expectations, which is practical when specifying lighting in projects where maintenance access to the tape location may involve additional labor.

The note that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables, and switches highlights that the tape is engineered as part of an integrated Tresco system, supporting consistent electrical and control behavior.

Common Questions About This Tresco LED Tape

Selecting This LED Tape For Your Project

The LED 3W Neutral White Tape Light, 16.4' Roll combines 3 watts per foot, 12V operation, and 3000K neutral white output, which together support consistent lighting performance along cabinets or shelving where a balanced tone is preferred.

The ability to cut every 3", use straight feed, t-connector, or right-angle connector, and stay within the stated 16.4' maximum continuous run gives clear parameters for planning layout geometry and run lengths.

The stated average rated life of 25,000 hours and the note emphasizing genuine Tresco transformers, power cables, connecting cables, and switches position this tape as a defined component within a Tresco LED system ready for project specification.