LED 1.5W Bright White Tape Light For Projects

LED 1.5W Bright White Tape Light delivers 1.5 watts per foot on a 20 foot roll, which gives installers a predictable light load across a full run and simplifies planning for 12V layouts on cabinets or displays. This Tresco Lighting LED tape lighting is a bright white 3000K, so it provides warm, usable task light that suits residential and commercial woodworking environments. The tape light is stocked in 20 foot rolls, which suits longer straight runs on upper cabinets, counters, and shelving without breaking the visual line. As an LED tape lighting solution, it supports low heat operation, so it can be used near wood, laminates, and other common shop materials without adding significant heat. Average rated life of 25,000 hours supports long-term installations that are intended to stay in place without frequent changeouts or service calls.

Key Tape Light Details For Real Jobs

• The tape is stocked in 20 foot rolls, giving one continuous length that helps run lighting along cabinets or casework without mid-run breaks, which keeps illumination consistent across the project.
• The system uses 1.5 watts per foot, so a full 20 foot roll uses a defined wattage, helping electricians and installers size 12V transformers and plan power distribution accurately on each job.
• The tape uses 3M adhesive peel and stick backing for easy installation, so it can be applied directly to clean mounting surfaces, reducing installation time compared with mechanical mounting methods.
• The tape can be cut every 3 inches, allowing the installer to trim the run to match cabinet or shelf dimensions closely, which reduces leftover length and keeps fittings tight to the work.
• The tape can be used with straight feed, t-connector or right-angle connector, so the same product can navigate turns, branch runs, or transitions between cabinet sections using the connector style that matches the layout.
• The tape supports a 20 foot maximum length for a continuous run, so installers know the upper limit for a single feed, which helps maintain light performance and simplifies layout planning.

Installation And Cut-To-Length Tape Details

This LED tape light uses a 3M adhesive peel and stick back for easy installation, so it mounts directly to prepared surfaces without extra fastening steps, which speeds up work on long cabinet or shelf runs. The tape can be cut every 3 inches, so installers have clearly marked cut points to match the tape length to the exact run without guessing, which helps avoid damaging LEDs between cut marks. A 20 foot maximum length for a continuous run sets a clear planning limit, keeping each powered length within the designed range and giving a simple rule when laying out multiple sections in larger rooms or long corridors.

Using Tresco LED Tape Lighting In Projects

Where This 20 Foot LED Tape Light Fits

This 20 foot roll of Tresco Lighting LED tape lighting works well anywhere a continuous low profile light line is needed, such as long cabinet bottoms, open shelving runs, or casework interiors. The 3000K bright white color output suits many woodworking and interior applications that call for a balanced, bright appearance rather than very cool or very warm light. Because the tape operates at 1.5 watts per foot on a 12V system, it aligns with low-voltage layouts that are common in undercabinet and display lighting, which supports integration with existing 12V power channels where Tresco transformers are used. Low heat performance makes this tape appropriate for enclosed millwork areas where temperature buildup is a concern, supporting usage near finished wood, laminates, and similar materials.

Details That Support Consistent Lighting Results

The 20 foot maximum length for a continuous run means each run can be designed to stay within the tape light's intended operating range, which supports consistent brightness from one end of the run to the other. Being able to cut the tape every 3 inches offers fine-grain length control, allowing installers to stop the tape just short of cabinet edges or obstacles, which keeps the finished look clean and avoids stray light beyond the work area. The tape can be inserted into three connector options - straight feed, t-connector, or right-angle connector - so a single roll can adapt to corners, branch lines, or changes in direction without changing product type. Link cords are available in 2, 6, 10, 24, 48, and 72 inch lengths (sold separately), which extends layout flexibility when bridging between cabinet sections or around obstructions while keeping the light line functionally continuous. Using Tresco accessories with Tresco fixtures is recommended, and Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables, and switches, so pairing this tape with Tresco components keeps the system within its intended design parameters on professional jobs.

Common Questions About This Tape Light Roll

Selecting This LED Tape For Your Layout

This Tresco Lighting LED 1.5W Bright White Tape Light combines a 20 foot roll length, 1.5 watts per foot at 12V, and 3000K bright white output, giving installers a defined, repeatable option for undercabinet and casework runs. Cut points every 3 inches and the ability to use straight feed, t-connector, or right-angle connector support precise layouts on real jobs. Pairing it with genuine Tresco transformers, power cables, connecting cables, and switches keeps the system operating as designed, so it can be specified confidently for new installations or upgrades.