12-24V wireless door sensor receiver from Tresco Lighting is an LED lighting accessory designed to work with 12VDC or 24VDC systems, so it fits common low-voltage cabinet and casework lighting layouts in shops and residential projects. The receiver is installed inline between the power supply and lights, which lets it control the circuit without altering existing LED fixtures or power supplies. Its 60W capacity at 12VDC handles moderate lighting loads in smaller runs, while the 96W capacity at 24VDC supports higher-output or longer LED runs on the same control point. A single button pairing process connects the receiver with compatible wireless door sensors, so the lights can respond automatically to door position. One receiver can be programmed with up to four door sensors, which allows multiple doors or openings to share the same controlled lighting zone where workflow demands it.
The receiver installs inline between the power supply and lights, so the incoming low-voltage feed enters the receiver before continuing to the LED fixtures. This straight-through arrangement keeps the control in the main power path, which simplifies layout decisions on cabinets, closets, or display cases. Because the unit is rated for 60W at 12VDC and 96W at 24VDC, installers can size the connected LED runs against those capacities when planning circuits. The wireless pairing is managed with a single button on the receiver, allowing each door sensor to be linked without extra tools or software. Once paired, the door sensors send control signals wirelessly, which eliminates control wiring runs between door locations and the receiver.
This 12-24V wireless door sensor receiver suits low-voltage LED lighting layouts where door position needs to control the lights, such as cabinets, closets, and display cases using Tresco Lighting components. Its role as an LED lighting accessory in the lighting system means it sits between the power supply and the LED fixtures, taking the place of a standard on-off control in that segment of the circuit. The 60W capacity at 12VDC gives enough headroom for typical under-cabinet or small case runs driven from a 12V supply, while the 96W capacity at 24VDC matches larger or higher-output runs supplied at 24V. Because one receiver can be programmed with up to four door sensors, it supports layouts with several doors tied to the same lighting zone, such as multi-door pantry cabinets or banks of wardrobe doors around one illuminated interior.
The simple one button pairing with wireless door sensors means each door sensor can be registered directly at the receiver, so field setup on site stays focused at the control location rather than at each opening. This helps keep commissioning efficient when several doors need to operate the same run of LED lights. Power failure memory allows the receiver to retain its operating state and paired relationships after power is lost and restored, which preserves lighting behavior across outages without repeating setup. Operating on either 12VDC or 24VDC makes the receiver adaptable to common low-voltage LED configurations, so a single model can serve different project standards while still honoring the stated 60W and 96W capacities. As a result, the L-WLDSREC-1 part number gives specifiers a defined receiver option when they need wireless door-based control in Tresco Lighting systems.
The 12-24V wireless door sensor receiver installs between the power supply and LED lights, so it uses signals from paired wireless door sensors to control power to the lighting run.
The receiver has a 60W capacity at 12VDC, so the total wattage of connected 12V LED fixtures on that controlled circuit is designed to stay within that 60W rating.
The receiver supports 96W capacity at 24VDC, allowing higher wattage LED runs or additional fixtures on 24V systems while staying within the specified 96W limit.
The receiver is installed inline between the power supply and the lights, so power from the supply passes through the receiver before feeding the LED fixtures.
The receiver uses a simple one button pairing process, so each compatible wireless door sensor is linked by activating that button during the sensor pairing procedure.
The L-WLDSREC-1 receiver can be programmed with up to four door sensors, allowing multiple openings to control the same connected LED lighting run.
This T616 12V/24V wireless door sensor receiver from Tresco Lighting provides 60W capacity at 12VDC and 96W capacity at 24VDC in an inline format, so it supports a defined range of LED loads on common low-voltage systems. Its simple one button pairing with wireless door sensors and support for up to four sensors on a single receiver offer a clear path to door-activated lighting zones in cabinets, closets, or displays. For projects using Tresco LED components from Wurth Baer Supply, this L-WLDSREC-1 receiver gives a specific part number to establish wireless door-based control in the lighting design.
Sold In: 1 Each