Dynabrade Dynorbital replacement pad gives Dynorbital sanders a fresh 11 inch sanding surface, so the tool can keep delivering consistent material removal on woodworking and finishing jobs. The pad is a medium replacement 11 inch hook and loop non-vacuum pad, which supports controlled sanding pressure that suits a wide range of wood surfaces and shop tasks. The hook and loop attachment allows for easy mounting to the tool or pad, so disc changes are quick during production workflows. This sanding disc backing pad is designed specifically as a replacement pad for Dynorbital sander setups, keeping the tool in service without changing the sanding process. A 15-hole layout is built into the sanding disc backing pad, so when it is paired with suitable vacuum systems, extracted dust moves away from the work surface for better visibility and a cleaner sanding path.
The pad uses a hook and loop attachment, which allows for easy mounting to the tool or pad and keeps sanding discs firmly held during operation. This same hook and loop interface also allows quick removal, which helps when swapping grits between passes on a cabinet or furniture job. The pad is an 11 inch medium replacement hook and loop non-vacuum pad, so its size and backing firmness support broad coverage while still following typical woodworking contours. Because the sanding disc backing pad is designed to work with vacuum systems and has 15 holes built into the pad, it supports dust movement through the pad when aligned with an appropriate extraction path.
This product is described as a replacement 11 inch hook and loop non-vacuum pad for Dynorbital sander, so it serves as a direct pad change when an existing Dynorbital pad is worn. Using this replacement pad keeps the Dynabrade Dynorbital tool in its familiar configuration, which helps operators maintain the same reach and coverage pattern on benches, panels, and assembled pieces. The pad is also identified as a sanding disc backing pad, so it forms the interface between the Dynorbital sander and the hook and loop sanding disc, carrying the load while the abrasive does the cutting. The medium description of the 11 inch non-vacuum pad indicates a backing firmness that supports a blend of control and stock removal, which is useful when moving between flattening operations and surface prep on the same machine.
The 11 inch pad size gives a broad sanding footprint, which helps cover panels and larger work surfaces with fewer passes compared to smaller pad diameters. This pad is designed to work with vacuum systems and has 15 holes built into the sanding disc backing pad, so evacuation paths are pre-set in the pad body. When connected within a dust extraction setup, the 15-hole arrangement helps pull dust away from the sanding face, which supports clearer visibility of the cut pattern. Reduced dust at the work surface also means the abrasive can stay engaged with the wood fibers instead of riding on debris, which supports a more even scratch pattern over the life of the disc. Because the hook and loop attachment allows for easy mounting to the tool or pad, the operator can reposition discs or swap to fresh abrasives without interrupting that dust flow design.
The pad is described as a replacement 11 inch hook and loop non-vacuum pad for Dynorbital sander, so it is intended for use on Dynabrade Dynorbital tools that accept this pad size.
The hook and loop attachment allows for easy mounting to the tool or pad, so sanding discs fasten securely yet can be removed quickly during grit changes or pad inspection.
The sanding disc backing pad is designed to work with vacuum systems and has 15 holes built into the pad, which directs sanding dust toward extraction for a cleaner work area.
The pad is identified as an 11 inch hook and loop non-vacuum pad, which provides a wide sanding footprint for covering larger surfaces in fewer passes.
The product is described as a medium replacement 11 inch hook and loop non-vacuum pad, indicating a balanced backing feel for both control and effective material removal.
This product is a hook and loop sanding disc backing pad, so its hook surface engages loop-backed sanding discs to transmit motion and pressure during sanding.
This product is the Dynabrade Dynorbital replacement pad medium 15-hole 11 inch pad - non-vacuum hook and loop, part number 56231, so it matches users who run Dynorbital sanders in that size range. The pad acts as a sanding disc backing pad with hook and loop attachment, so it supports quick abrasive swaps while holding discs firmly during operation. Because the sanding disc backing pad is designed to work with vacuum systems and has 15 holes built into the pad, it fits sanding setups where dust control and visibility matter on wood components.
Sold In: 1 Each