Dynabrade Dynorbital replacement pad gives your Dynabrade random orbital sander a fresh 8 inch working surface, restoring consistent contact with the workpiece so sanding performance stays predictable across the whole disc area.
The 8 inch (203 mm) disc diameter defines the sanding footprint, allowing broad coverage on panels and wide parts so fewer passes are needed on each job.
The pad uses a hook-face mount with hook & loop attachment, so abrasive discs fasten directly to the pad surface for quick disc changes that keep downtime between grits short.
This medium density urethane pad supports the disc with enough firmness to maintain flatness while still conforming to minor surface variations, which helps generate even, swirl-free finishes on wood or similar surfaces.
The non-vacuum design keeps the pad solid from center to edge with no holes, giving full-face contact where a vacuum interface is not required for the sanding setup.
The pad is custom built and precision engineered by Dynabrade to match their random orbital sanders, so weight and balance align with the tool to maintain smooth operation.
This Dynabrade 56236 pad uses a screw-mount connection to fasten to the sander, so the pad secures directly to the tool for a solid interface between backing pad and machine.
The screw-mount style establishes a fixed, repeatable attachment point, which helps keep the pad centered on the sander and supports smooth pad rotation during operation.
Because the pad is built for Dynabrade random orbital sanders and weight-mated to them, the installed pad works with the sander's balance to maintain controlled orbit motion.
The hook & loop abrasive attachment works with the screw-mounted pad by separating tool mounting from disc mounting, so the pad stays on the sander while discs can be swapped as needed for different grits or steps.
This 8 inch non-vacuum disc pad is formulated as a backing pad for Dynabrade random orbital sanders, so it fits sanding setups that rely on Dynabrade tools for surface preparation.
The non-vacuum, no-hole face serves applications where external vacuum through the pad is not required, which suits sanding stations that manage dust separately from the pad interface.
Its hook-face short nap design pairs with hook & loop abrasive discs, making it appropriate wherever quick disc changes are part of the sanding sequence, such as moving from stock removal grits to finer finishing grits.
The medium density urethane structure supports projects where a balance between surface conformity and flatness is important, helping handle both broad faces and modest contour transitions without switching pad types.
The pad's 3/8 inch thickness and weight-mated construction align with Dynabrade random orbital sander characteristics, positioning it for work where consistent swirl-free finishes are expected from those specific tools.
The custom-built, precision-engineered construction is tailored for optimum performance with Dynabrade random orbital sanders, so the pad and tool operate as a matched system to keep motion smooth during sanding.
The perfectly balanced, weight-mated design reduces imbalance at the sanding head, which supports the sander's ability to generate consistent swirl-free finishes across panels and parts.
The medium density urethane backing distributes pressure evenly through the 8 inch diameter, so the abrasive contacts the surface uniformly, helping prevent isolated high-pressure spots that can mark the workpiece.
The hook-face short nap surface keeps discs seated closely to the backing pad, limiting disc movement relative to the pad so the orbit pattern translates cleanly to the abrasive for predictable scratch patterns.
The non-vacuum, no-hole configuration maintains a continuous support surface under the abrasive, which helps the pad support the full disc area equally when vacuum channels are not needed for the sanding task.
The 3/8 inch thickness gives the backing enough depth to absorb some vibration while keeping the pad responsive, which helps the operator control the tool path and repeat sanding passes with similar results from part to part.
The Dynabrade 56236 replacement pad is made for Dynabrade random orbital sanders, so it supports the orbiting motion those tools use for surface finishing.
The pad diameter is 8 inches, or 203 mm, which provides a broad sanding area suited to panels and wider workpieces.
The hook-face short nap surface holds hook & loop discs securely while still allowing quick disc changes, which keeps sanding transitions between grits efficient.
The medium density urethane backing offers a mix of firmness and cushioning, helping maintain flat sanding while adapting slightly to minor surface variations.
This pad uses a screw-mount connection to attach to the sander, giving a secure, centered fit between the pad and the tool body.
The non-vacuum, no-hole design provides continuous backing across the full disc, which suits sanding setups where dust extraction through the pad is not used.
This Dynabrade Dynorbital replacement pad pairs an 8 inch non-vacuum disc surface with hook & loop attachment, giving Dynabrade random orbital sanders a balanced backing that supports consistent swirl-free finishes on wide surfaces.
The screw-mount design, 3/8 inch medium density urethane body, and weight-mated construction align with Dynabrade tools, so choosing this pad helps maintain matched performance across your sanding stations.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DY58445 Mfr# 58445 | Dynabrade Two-Handed Gear Driven Sander Air Planetary geared Motor with 8" Round PSA Pad, Non-Vacuum, - 58445 | ||||
Sold in: 1 Each |  DY58410 Mfr# 58410 | Dynabrade Two-Handed Dynorbital® Random Orbit Sander Air Rotary vane Motor with 8" Round PSA Pad, Non-Vacuum, - 58410 |