Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade Dynorbital replacement pad is a medium-density 8 inch (203 mm) diameter vacuum disc pad built for hook and loop sanding workflows. The hook-face surface mounts hook and loop sanding discs quickly, so changing grits stays fast during cabinet or woodworking jobs. The pad has eight holes through the sanding disc backing pad that line up with vacuum systems, pulling dust away from the work area for better visibility as you sand. A short nap hook-face keeps the disc engaged while still allowing clean removal when it is time to switch. The pad body is 3/8 inch (10 mm) thick urethane, which gives moderate compliance to follow surfaces without feeling too soft. A 5/16-24 male thread connects the pad to the sander, tying directly into the Dynabrade Dynorbital setup for ongoing use.
This 8 inch Dynabrade Dynorbital replacement pad centers around a 5/16-24 male thread, so the pad spins true when fastened to a matching tool spindle. The medium-density urethane body works with the short nap hook-face to keep sanding discs flat against the work, helping the vacuum holes stay open to airflow. With a 3/8 inch (10 mm) thick construction, the pad supports the abrasive across the face while still flexing slightly at the edges as you move over joints or edges. The eight-hole pattern in the disc backing pad aligns with vacuum setups designed for this layout, directing dust through the pad instead of across the surface as you sand.
This Dynabrade 56237 pad serves as a vacuum disc pad within a Dynabrade Dynorbital sanding system using a 5/16-24 threaded spindle. The 8 inch (203 mm) diameter makes it suitable for sanding broad, flat surfaces where longer strokes benefit from a larger contact area. Its eight-hole design routes air through the sanding disc backing pad, working with vacuum systems that use this pattern to pull dust away as the disc cuts. The pad uses a hook-face, short nap surface so hook and loop sanding discs attach directly to the pad face. With medium density and 3/8 inch (10 mm) urethane construction, the pad provides backing that is firm enough for controlled stock removal while still forgiving enough to move over minor irregularities in wood or similar materials.
The urethane body at 3/8 inch (10 mm) thickness gives this Dynabrade Dynorbital replacement pad a stable platform that resists bottoming out against the tool face as pressure is applied. Medium density in the urethane lets the pad flex just enough under load so the abrasive maintains contact across the surface instead of riding high on isolated spots. The hook-face short nap carries the hook and loop interface close to the urethane, which supports the disc evenly and helps reduce slippage during sanding passes. Because the pad has eight built-in vacuum holes, air can move through the pad and disc, clearing dust from the cutting zone and helping the abrasive stay more effective over each pass. The 5/16-24 male thread forms the mechanical link between pad and sander, so when the pad is tightened onto a matching spindle the disc runs true and tracks consistently across the work.
This pad is an 8 inch (203 mm) diameter vacuum disc pad, so it is built to work with 8 inch hook and loop sanding discs for full-face support.
The pad has eight holes through the sanding disc backing pad that route dust into a vacuum system, helping maintain a clearer surface and more consistent cutting action.
This pad uses a hook-face, short nap surface that grips hook and loop sanding discs, allowing quick disc changes while holding the abrasive securely in use.
The Dynabrade 56237 pad uses a 5/16-24 male thread, providing a direct connection to sanders built with that spindle thread for stable pad rotation.
The pad is 3/8 inch (10 mm) thick urethane with medium density, giving a balance of firmness and flex so the abrasive can follow the work surface.
This urethane hook and loop sanding pad combines a resilient 3/8 inch body, medium density, and eight vacuum holes to support discs while directing dust away through the pad.
The Dynabrade Dynorbital replacement pad brings together an 8 inch (203 mm) diameter, eight vacuum holes, and a hook-face short nap surface to support hook and loop sanding discs in production or shop settings. Its 3/8 inch (10 mm) thick urethane body with medium density supports controlled sanding while the 5/16-24 male thread ties it mechanically to compatible tools. For setups built around an 8 inch vacuum disc pad, this configuration keeps the abrasive backed, vented, and ready for repeated disc changes as work moves from grit to grit.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  DY58414 Mfr# 58414 | Dynabrade Two-Handed Dynorbital® Random Orbit Sander Air Rotary vane Motor with 8" Round PSA Pad, Vacuum, - 58414 |