Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade two-handed gear driven sander is a planetary geared air tool with a .45 hp motor running at 900 RPM, so it delivers aggressive material removal when you need to level substrates or strip filler efficiently over large workpieces. The extra-large 11-1/4 inch round hook and loop pad creates an 11 inch diameter sanding area, allowing each pass to cover more surface, which cuts down on time spent walking a panel, hull, or deck. The non-vacuum design is built for use with non-vacuum abrasive discs, so air power stays focused on drive torque instead of dust extraction airflow. The tool uses a unique epicycloidal pad motion that generates torque-enhanced power, helping maintain consistent stock removal as you move across repairs or laminates. A long handle layout supports true two-handed control, which helps keep the pad flat on vertical or overhead areas while sanding large transportation, emergency vehicles, solid surface work, swimming pools, and marine projects.
The Dynabrade 58040 uses a speed control lever positioned for thumb access, so operators can adjust sanding speed while maintaining their grip and stance on the workpiece. This layout helps match pad motion to different fillers or solid surface densities without stopping mid-panel. The hook-face sanding pad is designed for abrasive discs 11-1/4 inches in diameter, allowing quick disc changes while keeping the pad face clean and engaged across its full area. The air motor and planetary gearing are built for non-vacuum abrasive discs, so line air feeds power directly into pad rotation and epicycloidal motion for steady removal. The long handle and two-hand layout add control at startup and during transitions off edges, which matters when sanding large transportation panels, emergency vehicles, pools, or marine surfaces. Insulated housing further supports grip stability, because hands are less affected by cold air from prolonged air motor use.
This non-vacuum air sander is useful for manufacturers of large transportation equipment, where the 11 inch diameter sanding area lets technicians bring bus or truck panels down quickly after filler work. Emergency vehicle builders can use the torque-enhanced epicycloidal pad motion to level bodywork around doors and compartments, maintaining smooth transitions for paint preparation. Solid surface fabricators benefit from the .45 hp motor and 900 RPM operation when flattening wide seams or reshaping patched areas, because each pass covers more deck or counter span. Swimming pool manufacturers and repair crews gain value from the long handle design, which helps keep two-handed control while sanding curved shells and vertical pool walls. Marine original equipment manufacturers and marine repair facilities can rely on the planetary geared motor and large hook and loop pad to work across hull sides and decks, supporting uniform removal on gelcoat or fairing compounds.
The planetary geared motor and unique epicycloidal pad motion generate torque-enhanced power, which helps maintain pad rotation under load so removal stays even across fillers, laminates, or composite repairs. The speed control lever sits in a convenient thumb position, allowing on-the-fly adjustments to sanding intensity, which helps transition from aggressive leveling to finer passes without changing tools. The weight-mated hook-face sanding pad is tuned to the tool, reducing vibration levels so operators can track straight lines and arcs more easily over long panels. The non-vacuum configuration focuses air energy into the .45 hp motor rather than extraction, supporting steady pad motion when using appropriate non-vacuum abrasive discs. The long handle is designed for easy two-handed control, which stabilizes the 11-1/4 inch disc area as it sweeps across broad surfaces or vertical zones. The insulated housing limits cold air transmitted to the hands, helping operators maintain control-sensitive grip during extended shifts on transportation, emergency vehicle, solid surface, pool, or marine projects.
The Dynabrade 58040 uses a .45 hp air planetary geared motor running at 900 RPM, which supports aggressive sanding while maintaining consistent torque on large surfaces.
The sander uses a weight-mated 56231 hook-face sanding pad sized for abrasive discs 11-1/4 inches in diameter, giving a broad 11 inch sanding area per pass.
The Dynabrade two-handed gear driven sander is a non-vacuum model intended for use with non-vacuum abrasive discs, focusing air power on pad motion.
The long handle design allows two-handed control, which steadies the 11-1/4 inch pad on vertical or large areas commonly found in transportation, pool, and marine work.
The sander is useful for manufacturers and repair facilities handling large transportation vehicles, emergency vehicles, solid surface fabrication, swimming pools, and marine equipment.
The speed control lever is conveniently located for thumb adjustment, so operators can tailor pad speed to different materials without changing grip or stopping work.
The Dynabrade 58040 two-handed gear driven sander pairs a .45 hp air planetary geared motor with an 11-1/4 inch hook and loop pad, giving shops a non-vacuum air sander built for aggressive removal across wide areas. The unique epicycloidal pad motion and weight-mated hook-face pad support consistent torque-enhanced sanding on transportation, emergency vehicles, solid surface panels, swimming pools, and marine work. With long handle two-handed control, an insulated housing for hand comfort, and a thumb-positioned speed control lever, this tool aligns well with workflows that demand steady coverage on large substrates. For operations needing an 11 inch diameter sanding area with non-vacuum abrasive discs, this Dynabrade planetary geared sander provides a focused solution for leveling and filler removal.
Sold In: 1 Each