Division 2 Pneumatic Portable Vacuum System by Dynabrade is a pneumatic portable vacuum designed for non-metallic surfaces such as wood and plastics, so it fits well into woodworking and plastics shops handling dry dust. Powerful suction is described as ideal for dry-only industrial applications, which supports continuous cleanup where electric vacuums are not suited. The unit is designed for use in Class I, Division 2, Groups A, B, C and D T6 locations and Class II, Division 2, Groups F and G, so it serves hazardous locations defined in the National Electric Code (NFPA 70) and similar environments. European certifications ATEX and CE EX II 3 GD c IIC T6 (85 Degree C) further position this vacuum for regulated sites that require documented approvals. A top-quality stainless steel body with a 10 gallon, 38 liter, recovery tank provides a durable collection chamber sized for industrial dust collection routines.
This pneumatic portable vacuum operates from compressed air instead of electricity, which aligns with shops that already rely on air-driven tools in Class I, Division 2, and Class II, Division 2 areas. Use on non-metallic surfaces such as wood and plastics focuses the application on dry dust collection from those materials, so installation planning can center around those workflows. The unit also connects to optional 61483 Cart, allowing the operator to integrate the vacuum into a cart-based system for specific layouts. Static-dissipating and conductive design, with a kit stated as part of the unit, supports grounding arrangements within hazardous locations as defined in NFPA 70 and similar standards. Stainless steel construction with the 10 gallon, 38 liter, recovery tank provides a rigid structure for mounting hoses and positioning the cart in tight work aisles.
This pneumatic portable vacuum is specified for use on non-metallic surfaces such as wood and plastics, so it aligns with woodworking tools and equipment and power-tool dust collection processes around those materials. The product category Dust Collectors and Accessories, under Woodworking Tools and Equipment and Power Tools, positions this unit within shop dust management rather than general cleanup. Designed for use in Class I, Division 2, Groups A, B, C and D T6 and Class II, Division 2, Groups F and G, it addresses hazardous locations that contain combustible carbonaceous dusts such as coal, carbon black, charcoal, or coke dust, as well as atmospheres containing wood and plastic dusts. European certifications ATEX and CE EX II 3 GD c IIC T6 (85 Degree C) allow the same basic unit to serve sites that must respect those designations. Static-dissipating and conductive construction, along with a stated kit, supports use where wood dust, plastic dust, or other Group F and Group G particulates can generate charge on hoses and tanks.
The vacuum system uses a HEPA H14 filter with 99.995 percent efficiency on 0.3 micron particles, which means it captures extremely fine dust generated by woodworking and plastics machining, supporting cleaner air in the immediate work area. Two additional HEPA filters are stated as being within the power-head, making the unit eligible for IP6X, so the filtration design and enclosure support dust-tight performance in industrial environments. Aerosol leak testing for quality assurance further verifies that filtered air is not bypassing the HEPA stages, which matters when controlling hazardous Group F and Group G dusts. A top-quality stainless steel body provides a rigid, corrosion-resistant shell for daily industrial handling around woodworking and plastics equipment. The 10 gallon, 38 liter, recovery tank gives the operator enough capacity to run longer between disposal tasks while still being manageable to move on the easy-glide cart. Being static-dissipating and conductive reduces charge buildup across the system during continuous pneumatic operation, which is important when collecting combustible dusts as described for Group F and Group G atmospheres.
The Division 2 Pneumatic Portable Vacuum System is described for use on non-metallic surfaces such as wood and plastics, so it targets dry dust and debris from those materials in industrial applications.
The HEPA H14 filter provides 99.995 percent efficiency at 0.3 micron, so it captures very fine wood and plastic dust, improving local air quality around woodworking and plastics processes.
The pneumatic portable vacuum is designed for Class I, Division 2, Groups A, B, C and D T6 and Class II, Division 2, Groups F and G, covering atmospheres with combustible gases and dusts, including wood and plastic dusts.
The RAPTOR VAC, DIV 2, PNEUMATIC has a 10 gallon, 38 liter, recovery tank, providing capacity for extended dry dust collection during industrial woodworking or plastics operations.
The unit is static-dissipating and conductive, with a kit stated as part of the vacuum, which directs electrical charge away from dust-contact surfaces in atmospheres containing combustible wood, plastic, and carbonaceous dusts.
The vacuum is equipped with an easy-glide cart, so the operator can move the stainless steel body and 10 gallon tank between work cells or cleanup areas with less resistance on the shop floor.
The Dynabrade RAPTOR VAC, DIV 2, PNEUMATIC pairs powerful suction with HEPA H14 filtration at 99.995 percent efficiency on 0.3 micron dust, so it addresses fine particulates from wood and plastics in industrial environments. Design for Class I, Division 2 and Class II, Division 2 Groups F and G locations, along with ATEX and CE EX II 3 GD certifications, positions this pneumatic portable vacuum for hazardous locations that must align with NFPA 70 and related standards. A top-quality stainless steel body, 10 gallon, 38 liter, recovery tank, static-dissipating conductive design, aerosol leak testing, and an easy-glide cart combine into a dust collection system suited to demanding woodworking and plastics workflows.
Sold In: 1 Each