3/4" x 25' Air Hose Supply describes a grounded air line built for Dynabrade Raptor vacuum systems, so installers get a clearly matched hose length and diameter for these tools. The 3/4 inch size supports air flow suitable for the specified Dynabrade Raptor models, which helps the connected dust collection and tools operate as intended. The 25 foot length provides a defined reach from the Raptor vacuum to the work area, helping plan tool positions and routing in the shop. This hose is described as a Raptor grounded air line, so it is designed to provide grounding as part of the system, which matters where static control is required around dust collection. Being an air line for Dynabrade Raptor vacuums, it fits into a dedicated system layout instead of generic pneumatic plumbing.
This product is described specifically for use with Dynabrade Division 2 Raptor Vacuum models, so its fit and design are tailored to that family of equipment. By matching the 3/4 inch hose size and 25 foot length to these Raptor vacuums, installers can plan hose runs confident that this air line is intended for that application. The identification as an air hose supply positions it as part of the air delivery path, which guides where it should be installed within the larger dust collection system. This targeted application helps organize the layout around the Dynabrade Raptor vacuum rather than treating the hose as a generic shop line.
The Raptor grounded air line is specified for use with Dynabrade Division 2 Raptor Vacuum models 61430, 6143, 61440, 61441, 61450, and 61451, so it serves operations built around those units. It is also listed for Dynabrade Raptor models 61465, 61466, 61461, 16462, 61463, and 61464, which extends its role across a wide range of Raptor vacuums. The description notes that it works with both electric and pneumatic Raptor versions, so the same hose can be used regardless of which drive style those listed vacuum models use. This range of supported Raptor units means the air line can be deployed across multiple stations that share these specific Dynabrade vacuums.
The air hose is described as a Raptor grounded air line and as suitable for Division 1 and 2 - ATEX Category 3 for Zones 2 and 22, which ties it to environments classified under those standards where grounding of lines is part of the system design. It is also described as suitable for ATEX Category 2 for Zones 1 and 21, so the hose is intended for additional zoned areas within the same classification framework. Having the ATEX categories and zones specified gives installers clear information about the classified areas where this grounded air line is designed to operate within a dust collection setup. Paired with the 3/4 inch by 25 foot size, these details help plan hose routing to keep the Dynabrade Raptor vacuum and its connected points aligned with those environments.
The 3/4" x 25' Air Hose Supply is for use with Dynabrade Division 2 Raptor Vacuum models 61430, 6143, 61440, 61441, 61450, 61451, 61465, 61466, 61461, 16462, 61463, and 61464, supporting those specific vacuum systems.
The 3/4 inch size defines the air passage bore for the Raptor grounded air line, which aligns air flow with the Dynabrade Raptor vacuum models it is specified to serve in dust collection use.
The 25 foot length of this air hose supply sets the reach between the Raptor vacuum and the work area, helping position tools and route the line within the available distance.
The term Raptor grounded air line indicates the hose is intended to provide a grounded air path for Dynabrade Raptor vacuum systems, which is relevant when grounding is part of the dust collection design.
This air line is described for Division 1 and 2 - ATEX Category 3 for Zones 2 and 22 and ATEX Category 2 for Zones 1 and 21, defining the classified environments it is designed to operate in.
The product is identified as an air hose supply and is categorized under dust collectors and accessories, so it functions as an air line within the Dynabrade Raptor dust collection system.
The Dynabrade 3/4" x 25' Air Hose Supply is identified specifically as a Raptor grounded air line for the listed Dynabrade Raptor vacuum models, so it matches those systems by design instead of serving as a general shop hose. Its 3/4 inch bore and 25 foot length give clear parameters for routing air within the dust collection layout. With stated suitability for Division 1 and 2 and the specified ATEX categories and zones, this air line supports Raptor installations that must operate in those classified environments. Selecting this hose aligns the air supply path with the Dynabrade Raptor vacuum models and application zones described in the product details.
Sold In: 1 Each