Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade 64201 downdraft sanding table is a dust collection workstation that pulls airborne dust down through the tabletop while sanding. The working area of 33 inch W x 41 inch L gives room for furniture parts and panels, so sanding stays on the table instead of over the shop. Dual filtration inside the unit uses 1-micron pleated paper filters, so it captures very fine dust as air passes through the table. A Rhino Linings coated tabletop surface creates a durable, anti-slip work area that stabilizes parts as you sand, which supports consistent scratch patterns. Two convenient dust-tight electric outlets on the table supply power near the work, reducing cord runs from walls and helping keep the sanding zone cleaner. Power comes from a heavy duty 1.0 hp electric motor rated at 115 Volt, 1 Phase, 60 Hz, so the table integrates with common shop electrical service.
The power source on this unit is one heavy duty electric motor rated at 1.0 hp, with electric capacity of 115 Volt, 1 Phase, 60 Hz, so it ties into typical single phase shop circuits when locating the table. The 5 inch diameter casters support rolling the downdraft sanding table into position, so placement can be adjusted as workflows change or as jobs shift between benches and machines. Two dust-tight electric outlets built into the unit concentrate tool power at the station, so the setup keeps cords close to the table edge instead of across walkways. The Rhino Linings coated tabletop surface forms a durable and anti-slip platform, so workpieces stay put under the sander, reducing the tendency for parts to slide while maintaining control over edges and profiles.
This Dynabrade downdraft dust collection table is categorized under Woodworking Tools and Equipment, Power Tools, and Dust Collection, so it functions as a central sanding and dust capture point in a woodshop. The working area of 33 inch W x 41 inch L suits many cabinet doors, face frames, or wood panels, so operators can sand flat on the Rhino Linings coated tabletop without overhanging workpieces. Because the table is ideal for use with vacuum-ready or non-vacuum tools, it supports both pneumatic or electric sanders that have their own vacuum ports and tools that rely primarily on the downdraft airflow. The dual filtration design that accepts 1-micron pleated paper filters routes dust-laden air through fine filter media, so fine sanding dust stays in the filtration system instead of remaining in the breathing zone around the operator.
The Rhino Linings coated tabletop surface is described as durable and anti-slip, so it resists wear from repeated sanding contact and grips parts during passes, supporting even pressure and more uniform sanding results. Two handy storage compartments for tools and accessories keep abrasives and small tools near the working area, so changeovers between grits or tools can happen at the table without losing time searching elsewhere. The dual filtration arrangement accepts paper filters sized 20 inch W x 25 inch L, with options for the 64671 standard paper air filter or the 64672 UL-Rated Class I non-flammable air filter, so filtration can be matched to standard dust or environments that call for non-flammable filter media. One pre-filter blanket is part of each model, so air passes first through a preliminary layer before the 1-micron pleated paper filters, which helps extend the service life of the main filters. Combined with the heavy duty 1.0 hp electric motor at 115 Volt, 1 Phase, 60 Hz, these elements work together so airflow, filtration, and workpiece support align to keep sanding productive and dust directed into the collection system.
The Dynabrade 64201 sanding table has a working area of 33 inch W x 41 inch L, so typical cabinet parts and panels can be fully supported during sanding.
The table uses dual filtration that accepts 1-micron pleated paper filters sized 20 inch W x 25 inch L, so dust-laden air passes through fine media to capture small particles.
The Dynabrade 64201 uses a heavy duty 1.0 hp electric motor with electric capacity of 115 Volt, 1 Phase, 60 Hz, so it operates on common single phase shop power.
The Rhino Linings coated tabletop surface is durable and anti-slip, so it resists wear and helps hold workpieces steady during sanding passes.
The sanding table has 5 inch diameter casters that allow easy maneuverability, so it can be rolled to different work areas as layouts or tasks change.
The dual filtration system accepts 20 inch W x 25 inch L x 2 inch thick paper filters, either 64671 standard paper air filter or 64672 UL-Rated Class I non-flammable air filter.
This 33 inch W x 41 inch L Dynabrade downdraft dust collection table combines a 1.0 hp motor, 115 Volt single phase power, and dual 1-micron-capable filtration to pull sanding dust away from the operator. The Rhino Linings coated tabletop, two dust-tight electric outlets, and 5 inch diameter casters support controlled sanding, localized power, and flexible placement. For woodshops needing a defined sanding station that integrates dust collection, this downdraft sanding table aligns the work surface, filtration options, and mobility around real daily sanding tasks.
Sold In: 1 Each
