Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
33 W x 41 L downdraft sanding table from Dynabrade 64208 pulls dust down through the work surface, helping reduce airborne contaminants while sanding so the work area stays clearer and operators work over the piece instead of in a cloud. The 33 inch wide by 41 inch long working area gives room for typical cabinet and panel components, so parts sit flat on the surface and benefit from consistent downdraft capture. The table is powered by a 1.0 hp heavy duty electric motor rated at 230 Volt, 3 Phase, 60 Hz, so airflow is driven by a dedicated motor sized for sanding applications. The tabletop surface is Rhino Linings coated, giving a durable and anti-slip work surface so parts stay more stable as tools move across them. The design is ideal for use with vacuum-ready or non-vacuum tools, allowing shops to use existing sanders while still directing dust into the table.
This Dynabrade downdraft sanding table operates from an electric capacity of 230 Volt, 3 Phase, 60 Hz, so it integrates into three phase shop power layouts and draws from a known industrial voltage standard. The 1.0 hp heavy duty electric motor is dedicated to running the downdraft airflow, so suction is driven by a motor sized for continuous tool use rather than a light-duty source. The working surface of 33 inches by 41 inches defines the footprint needed on the floor, helping plan where to position the table relative to other machinery. Because the design is ideal for vacuum-ready or non-vacuum tools, the same table can be used in sanding areas that already rely on self-extracting sanders or standard pneumatic or electric sanders.
This Dynabrade downdraft sanding station is suited to woodworking environments where airborne sanding dust needs to be drawn away from the operator at the source. The 33 inch W x 41 inch L working area accommodates a range of workpieces, from narrow components up to wider cabinet parts, so operators can keep more of the part over active airflow while sanding edges or faces. Being ideal for vacuum-ready or non-vacuum tools, the table supports air sanders with built-in vacuum ports as well as traditional non-vacuum tools, which keeps sanding options open while still directing dust into the downdraft plenum. The Rhino Linings coated tabletop surface is both durable and anti-slip, so jigs, parts, and sanding blocks sit more securely as forces are applied during sanding passes. Two handy storage compartments for tools and accessories are integrated into the table body, providing a place to stage sanders, abrasives, or related items so the working surface is reserved for the workpiece.
The dual filtration system accepts 1-micron pleated paper filters measuring 20 inches W x 25 inches L, so the table can capture fine dust across a defined media area while maintaining airflow. Each model uses one pre-filter blanket before the pleated element, which allows heavier dust to settle out first, supporting longer intervals between pleated filter changes. Two paper filters can be chosen: the 64671 Standard Paper Air Filter and the 64672 UL-Rated Class I Non-Flammable Air Filter, so the same table body can be configured to different internal safety specifications while preserving its downdraft function. The power source is a single heavy duty 1.0 hp electric motor at 230 Volt, 3 Phase, 60 Hz, concentrating drive power on moving air through the table and filters. Two convenient dust-tight electric outlets are built into the table, giving powered tools a nearby power point so sanding can start directly at the station. The 5 inch diameter casters allow easy maneuverability of the table, so it can be repositioned in the shop to follow changing workflows or to create a dedicated sanding zone when needed.
The Dynabrade 64208 has a working area of 33 inches wide by 41 inches long, giving space for typical cabinet parts to sit flat over the downdraft airflow during sanding.
The table uses one heavy duty 1.0 hp electric motor and operates at 230 Volt, 3 Phase, 60 Hz, so it connects to common three phase shop power.
The table uses a pre-filter blanket followed by 1-micron pleated paper filters sized 20 inches by 25 inches, so larger particles are captured first and fine dust is collected in the pleated media.
This model can use the 64671 Standard Paper Air Filter or the 64672 UL-Rated Class I Non-Flammable Air Filter, so the filtration can match specific plant requirements.
The Dynabrade 64208 is ideal for use with vacuum-ready or non-vacuum tools, so it supports a range of sanders while still pulling dust through the downdraft surface.
The table uses 5 inch diameter casters, allowing it to be rolled between work areas so sanding and dust collection can be set up where it is most useful.
The Dynabrade 64208 33 inch W x 41 inch L downdraft sanding table combines a Rhino Linings coated anti-slip surface, dual filtration down to 1 micron, and a 1.0 hp 230 Volt 3 Phase motor to control dust at the sanding point. With built-in dust-tight outlets, two storage compartments, and 5 inch casters, the station supports both fixed and flexible sanding setups around the shop. Choose the standard or UL-Rated Class I filter option that aligns with your internal requirements, and put this table into your sanding area to capture airborne contaminants directly through the work surface.
Sold In: 1 Each
