
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Dynabrade 64209 downdraft sanding table provides a 33 inch wide by 60 inch long working area, so larger panels and parts can lie flat while sanding and stay fully supported. The table is designed to eliminate airborne dust and contaminants while sanding, which pulls dust down and away from your breathing zone for a cleaner work area. It is ideal for use with vacuum-ready or non-vacuum tools, so a shop using mixed pneumatic or electric sanders can keep dust capture consistent at the bench. As a 230 Volt, 3 Phase, 60 Hz unit powered by a 1.0 hp heavy duty electric motor, it ties directly into typical three phase shop power and runs as a dedicated dust collection station.
This downdraft sanding table uses electric capacity of 230 Volt, 3 Phase, 60 Hz, so it fits into shops wired with three phase service and can be assigned its own circuit. The power source is one heavy duty electric motor rated at 1.0 hp, which drives the downdraft airflow as a dedicated motor load rather than sharing a central collector. With 5 inch diameter casters, the table rolls into position before tying into power, allowing positioning near existing sanding lines or assembly benches. The working area of 33 by 60 inches defines the footprint needed around the station, which helps plan clearance for loading and unloading workpieces.
The 33 inch wide by 60 inch long working area suits cabinet doors, drawer fronts, and similar components that benefit from flat support during sanding, so operators can move tools over the surface without overhang. Because the table is ideal for vacuum-ready or non-vacuum tools, it fits into mixed-tool environments where some sanders use external vacuum ports and others do not, keeping one central station for dust capture. The unit functions to eliminate airborne dust and contaminants while sanding, so sanding can be performed in open shop areas without directing dust toward nearby machines. Dual filtration that accepts 1 micron pleated paper filters processes the collected air before discharge, which supports fine dust control in wood-finishing or prep zones.
The Rhino Linings coated tabletop surface is durable and anti-slip, so workpieces resist sliding under tool pressure and the surface stands up to repeated part handling. Two handy storage compartments for tools and accessories hold sanders and abrasives at the station, which supports cell-based layouts where operators stay with the workpiece. Two convenient dust-tight electric outlets on the unit support plugging in electric sanding or prep tools right at the table, which helps reduce cord runs across aisles. The 5 inch diameter casters let the table move between work areas, so one downdraft unit can serve different cells over a shift.
The downdraft sanding table uses dual filtration that accepts 1 micron pleated paper filters sized 20 inches wide by 25 inches long, which gives a predictable filtration area for regular filter changes and consistent airflow. Two paper filters are specified for the unit: 64671 Standard Paper Air Filter and 64672 UL-Rated Class I Non-Flammable Air Filter, so shops can choose a standard option or a UL-rated non-flammable option to match internal requirements. Each model includes one pre-filter blanket, which provides an initial capture layer ahead of the pleated filters to extend their service life between changes.
The electric capacity of 230 Volt, 3 Phase, 60 Hz with a 1.0 hp motor offers a dedicated power profile, which lets the downdraft airflow stay stable during long sanding runs. The working area of 33 by 60 inches defines a consistent collection zone directly under the work, which supports repeatable dust capture for similarly sized parts day after day. Eliminating airborne dust and contaminants while sanding not only improves visibility at the work surface, but also reduces dust settling on nearby tooling and benches. With its mobile base on 5 inch diameter casters, the table can be repositioned to maintain optimal proximity to upstream or downstream operations as layouts evolve.
The Dynabrade 64209 downdraft sanding table has a working area of 33 inches wide by 60 inches long, which supports typical cabinet and panel components during sanding.
The downdraft sanding table uses electric capacity of 230 Volt, 3 Phase, 60 Hz, driven by a 1.0 hp heavy duty electric motor for its airflow.
The table uses dual filtration that accepts 1 micron pleated paper filters sized 20 by 25 inches, which capture fine sanding dust before air returns to the shop.
The Dynabrade 64209 table specifies two paper filters: 64671 Standard Paper Air Filter and 64672 UL-Rated Class I Non-Flammable Air Filter, both sized 20 by 25 by 2 inches.
The downdraft sanding table is ideal for use with vacuum-ready or non-vacuum tools, so it serves mixed sanding tool setups from one station.
The Rhino Linings coated tabletop surface is durable and anti-slip, which helps keep workpieces stable while sanding and resists wear from daily use.
This Dynabrade 64209 downdraft sanding table combines a 33 by 60 inch working area with downdraft airflow to eliminate airborne dust while sanding, which supports cleaner, clearer work on every part. Dual filtration with 1 micron pleated paper filters, a Rhino Linings coated tabletop, and 230 Volt three phase power tie directly into serious woodworking environments. For shops that need a mobile station with on-board outlets, defined working dimensions, and specified filter options, this table provides a focused dust-collection work surface ready for sanding operations.
Sold In: 1 Each