Clarendon, Zinc Towel Bar 18" Center of Center, Polished Nickel

Clarendon Zinc Towel Bar 18 Inch For Baths

Clarendon zinc towel bar 18 inch from Amerock Corporation is a bath hardware bar designed for hanging towels in bathroom spaces, so it serves as a fixed point for daily use near sinks, showers, or tubs. The bar belongs to the Clarendon collection, which keeps the visual style consistent across matching bath hardware pieces, helping projects maintain a unified look. Its 18 inch center to center dimension sets the mounting hole spacing, allowing precise planning when laying out wall anchors or backing. The overall 19-3/4 inch length provides extra reach beyond the mounting posts, giving usable bar space for standard hand or bath towels. A width of 2-13/16 inches defines the footprint against the wall, which is useful when laying out clearances near trim, switches, or mirrors. The towel bar is part of the bath hardware product class, so it fits naturally into residential or light commercial bathroom layouts.

Key Clarendon Towel Bar Details For Projects

• The towel bar is made from zinc, which creates a solid metal component that handles regular towel loading while keeping weight moderate for mounting on typical bathroom wall substrates.
• A polished nickel finish provides a bright metallic surface that pairs with polished nickel faucets and fittings, helping installers coordinate finishes across the entire bath hardware set.
• The 18 inch center to center measurement defines the exact spacing between mounting points, which lets installers drill accurately and align the bar with studs or anchors during layout.
• The 19-3/4 inch overall length extends beyond the posts, giving added bar width for hanging towels while still fitting common bathroom wall sections between cabinets or mirrors.
• A projection of 2-15/16 inches sets how far the bar stands off the wall, creating room for air around towels so they hang freely without rubbing painted or tiled surfaces.
• Screw mounting using 8-32 x 1 inch screws gives a known fastener size, allowing straightforward hole preparation and secure fastening into wall anchors or blocking.

Mounting And Fit Details For Clarendon Bar

The Clarendon 18 inch center to center layout controls how the towel bar fits into the wall space, so installers can mark two fixed points and trust that the bar will bridge them cleanly. With a 19-3/4 inch overall length, the bar covers slightly more wall area than the mounting span, giving a finished appearance that hides the mounting interface between the posts and surface. Its 2-15/16 inch projection sets a predictable standoff from the wall, which is useful when coordinating with shower doors, medicine cabinets, or adjacent hardware to avoid interference. The 2-13/16 inch width defines the vertical profile on the wall, so layout against tile patterns or decorative bands stays controlled. Using 8-32 x 1 inch screws as the fastening method provides a standard machine screw size that works well with typical bathroom substrates when paired with appropriate anchors or backing.

How This Amerock Clarendon Towel Bar Works Best

Clarendon Bath Hardware Towel Bar Placement

This Amerock Corporation Clarendon series towel bar belongs to the bath hardware category, so it is intended for bathroom environments where towels need a fixed hanging location. The 18 inch center to center spacing positions it well beside vanities, where it can hold hand towels within easy reach of the sink without dominating the wall. Its 19-3/4 inch overall length suits mounting on shorter wall sections, such as between a vanity and a shower, where a longer bar might conflict with corners or trim. The 2-13/16 inch width and 2-15/16 inch projection define a compact footprint, which helps it fit in tighter layouts near doors or cabinetry while still giving enough bar clearance for folding or draping towels. The polished nickel finish lets the bar visually tie into polished nickel faucets, shower valves, and other Clarendon collection pieces.

Details That Support Reliable Towel Bar Installation

The zinc material of the Clarendon series towel bar provides a sturdy metal body, which supports the load of wet or dry towels in normal bathroom use without adding excessive weight to the wall. Its 18 inch center to center dimension acts as a clear drilling guide, reducing guesswork when marking holes and helping keep both posts level with a standard spirit level. The 19-3/4 inch overall length allows a slight overhang beyond the mounting points, which visually balances the bar between the posts and covers minor layout variations along the wall. With a projection of 2-15/16 inches, towels hang away from the wall surface, helping reduce contact with paint or tile grout lines. The 2-13/16 inch width provides predictable coverage over wall finishes, which supports clean caulk lines or tight tiling around the hardware. Mounting with 8-32 x 1 inch screws establishes a consistent attachment size, simplifying field preparation and supporting repeatable results across multiple bathrooms in the same project.

Common Questions About The Clarendon Towel Bar

Selecting This Clarendon Bar For Polished Nickel Baths

The Amerock Corporation Clarendon series zinc towel bar with 18 inch center to center spacing and 19-3/4 inch overall length suits projects needing a compact yet functional bar. Its polished nickel finish coordinates with polished nickel bath fixtures, while zinc construction supports everyday towel use in bathroom environments. With known dimensions for width and projection, and mounting via 8-32 x 1 inch screws, this bar gives installers clear numbers for planning layout and attachment. For bath hardware projects built around the Clarendon collection look and polished nickel finishes, this towel bar offers a defined fit and finish point on the wall.