Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Markham Series zinc towel ring defines this Amerock Corporation bath hardware as a dedicated spot for hand towels, giving a consistent landing place beside sinks or vanities. The zinc material creates a solid basis for everyday towel hanging in residential bath spaces, helping keep walls organized around the fixture. The 6-7/8 inch length centers the ring in a compact footprint, so it fits tightly planned bath layouts while still presenting a clear grab point for towels. The 7-15/16 inch width shapes a stable arc for the towel, helping it hang open for airflow rather than bunching against the wall. A 3-1/8 inch projection holds towels out from the surface, which reduces wall contact and allows damp towels to dry more evenly between uses. The brushed nickel finish defines the visual tone, giving bath hardware a muted metallic surface that helps tie in with other brushed nickel fixtures.
This Amerock BH26511G10 towel ring uses an 8-32 x 1 screw size as the mounting fastener, so the threaded connection follows a familiar pattern for bath hardware installation into suitable backing. The 3-1/8 inch projection works with this mounting depth by keeping leverage forces modest, helping the ring sit stable against the wall once tightened. With a length of 6-7/8 inch and width of 7-15/16 inch, the footprint sets clear top and side clearances to consider when locating the base on tile or drywall, which helps avoid conflicts with nearby trim, switches, or existing fixtures. The brushed nickel finish runs across the visible mounting area as well as the ring, keeping the face of the installation visually unified when the piece is set on the wall.
This Markham Series zinc towel ring fits bath hardware layouts where a defined hand towel position is needed beside sinks, vanities, or powder room basins. The compact 6-7/8 inch length allows placement on narrow wall sections that often flank mirrors, so the ring fits into tight areas without crowding cabinetry. Its 7-15/16 inch width supports towels in guest baths or main baths, creating a predictable location that helps users reach towels without scanning for hooks. The 3-1/8 inch projection allows installation on flat walls near doors or shower surrounds while still keeping towels clear of adjacent surfaces, which matters where multiple elements share limited wall depth. The brushed nickel finish ties into other brushed nickel pieces in the room, helping the ring read as part of a coordinated bath hardware set.
The Amerock BH26511G10 part number identifies this specific Markham Series brushed nickel towel ring, which simplifies reordering the same size and finish when matching hardware across multiple baths. The zinc construction provides a consistent base material, so each ring presents the same weight and feel during mounting, which helps align multiple units along a wall or across different rooms. The defined 6-7/8 inch length and 7-15/16 inch width create predictable clearances for layout, allowing installers to mark repeating centerlines and heights when setting several rings at once. A 3-1/8 inch projection from the wall maintains the same stand-off dimension across every installation, which keeps sightlines uniform when the ring is used in a line with other Markham bath pieces. The 8-32 x 1 screw size standardizes the fastening point, streamlining installation steps when moving from one ring to the next on a project that specifies this Amerock bath hardware.
The Markham Series zinc towel ring is made from zinc, which forms the main body of the ring and mounting area, giving a solid base for everyday towel use in bathroom environments.
The Amerock BH26511G10 towel ring uses a brushed nickel finish, providing a muted metallic look that coordinates with other brushed nickel bath fixtures in the same space.
The towel ring has a 6-7/8 inch length, a 7-15/16 inch width, and a 3-1/8 inch projection, which together define the wall footprint and towel clearance during layout.
The bath hardware towel ring projects 3-1/8 inch from the wall, holding towels away from the surface to promote airflow and reduce prolonged wall contact.
The towel ring uses an 8-32 x 1 screw size, which sets the thread type and length for creating a secure connection between the mounting base and the wall surface.
This zinc bath towel holder belongs to the Markham Series collection, helping projects maintain a consistent design language across related Amerock bath hardware pieces.
The Amerock Corporation Markham Series zinc towel ring BH26511G10 brings a 6-7/8 inch length, 7-15/16 inch width, and 3-1/8 inch projection together in a brushed nickel finish, giving bath layouts a defined, repeatable spot for hand towels. The zinc construction and 8-32 x 1 screw size create a clear hardware specification that supports efficient planning on residential or light commercial bath projects. For bath spaces built around brushed nickel fixtures, this Markham Series towel ring offers a matching, dimensioned hand towel location that fits tight wall areas while helping keep towels accessible beside sinks and vanities.
Sold In: 1 Each