Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Markham zinc towel bar from Amerock Corporation provides a 24 inch hanging span in a Golden Champagne finish, so it supports standard bath towel layouts while matching warm-toned bath hardware on the same wall line. The zinc construction defines this bar as part of Amerock bath hardware rather than trim-only decor, which suits routine towel use in residential bath spaces. The listed length of 26-7/16 inches indicates the full end-to-end dimension, helping lay out wall space when other fixtures sit nearby. A 3-1/8 inch projection sets the bar off the wall enough to clear typical bath towels, helping them hang without rubbing finished surfaces. The 2-5/16 inch width describes the supporting footprint at the wall, which matters when aligning with backing or finished tile bands. Center-to-center mounting at 24 inches gives a clear drilling reference for consistently spaced anchor points.
The 24 inch center-to-center dimension sets the primary mounting spread, so mounting holes can be marked at that spacing before drilling into finished walls. The specified screw size of 8-32 x 1 inch defines the fastener thread and length, aligning with common bath hardware installation tools and wall anchors. With an overall length of 26-7/16 inches, the bar extends beyond the mounting points on each side, which affects how close it can sit to adjacent cabinets or shower surrounds. A 3-1/8 inch projection gives predictable standoff from the wall, useful when coordinating with door swings or nearby hooks. The 2-5/16 inch width dimension supports planning around tile patterns so the mounting area lands cleanly on solid backing or full tiles.
This Amerock Markham Series towel bar falls under bath hardware, positioning it for residential or light commercial bath spaces where a defined 24 inch hanging span is needed. The 24 inch center-to-center layout corresponds to a common bath towel width, which helps towels hang without excessive bunching. Its 26-7/16 inch overall length works well on open wall sections beside vanities, toilets, or showers, leaving space at each end before hitting vertical trim or corners. The Golden Champagne finish allows the bar to sit comfortably alongside warm metal tones, such as champagne or brushed brass fixtures, reducing visual mismatch across the project. With a 3-1/8 inch projection, the bar fits typical bath wall depths without projecting excessively into narrow passages, which can matter in compact bathrooms.
The defined 24 inch center-to-center dimension gives a precise drilling reference, supporting repeatable hole spacing across multiple baths on the same job. Using this fixed spread, installers can transfer layouts to jigs or templates, reducing measuring time. The 26-7/16 inch overall length offers a predictable outside dimension, which simplifies checking clearances to mirrors, medicine cabinets, or shower glass. A 3-1/8 inch projection standardizes how far towels sit off the wall, reducing guesswork when coordinating with doors, robe hooks, or adjacent bars. The 2-5/16 inch width measurement at the mounting area helps align the bar to tile joints or wainscot caps, improving visual alignment from one bathroom to the next. The specified 8-32 x 1 inch screw size aligns with common driver bits, supporting consistent hardware installation routines. As part of Amerock bath hardware, the Markham Series naming helps track this bar across ordering, site labeling, and punch list notes.
The Markham zinc towel bar uses a 24 inch center-to-center dimension, so it provides a standard 24 inch hanging span suited to typical bath towel widths and common bath layouts.
The 26-7/16 inch overall length defines the full bar span, helping position it between cabinets, mirrors, or corners so end posts land cleanly on available wall space.
The 3-1/8 inch projection sets how far the bar stands off the wall, giving towels clearance to hang without pressing into finished surfaces in typical bath installations.
The Golden Champagne finish provides a warm metallic tone, allowing the towel bar to visually coordinate with similar warm-colored bath fixtures and cabinet hardware.
The 2-5/16 inch width defines the mounting footprint, helping align the bar with tile joints, trim lines, or wainscot caps for consistent, clean-looking installations.
The BH26514BBZ part number identifies this specific Amerock Markham Series 24 inch Golden Champagne zinc towel bar for ordering, inventory, and job documentation.
The Markham zinc towel bar delivers a 24 inch center-to-center hanging span, a 26-7/16 inch overall length, and a 3-1/8 inch projection, so it fits common bath wall runs while holding full-size towels. Its Golden Champagne finish and 2-5/16 inch mounting width support clean alignment with warm-toned fixtures and tile layouts. With Amerock Markham Series identification and BH26514BBZ part numbering, this bar can be specified clearly across drawings and material lists. Use these defined dimensions and finish details to align your bath hardware package on the next project.
Sold In: 1 Each