Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Markham zinc towel bar 24 inch describes a bath hardware bar from the Markham series that holds towels on a rigid zinc bar with a polished chrome finish, so it supports everyday bath use while matching common bright chrome fixtures in the room. The Amerock Corporation Markham series identity ties this bar into a coordinated bath hardware family, which helps keep visual lines consistent across a project. The zinc material defines a solid metal construction, which gives the bar a firm feel when towels are hung or removed during daily use. The polished chrome finish provides a bright, reflective surface that coordinates with many faucets and shower trims, helping installers satisfy design expectations. Listed as bath hardware within builders hardware, this bar is intended for bathroom installations where a 24 inch center to center bar dimension is needed on the wall.
This Amerock Markham towel bar uses a 24 inch center to center measurement, so hole locations can be laid out with that exact spacing for the mounting points. The 26-7/16 inch overall length defines the total horizontal space required, guiding placement between walls, shower glass, or cabinets. With a 3-1/8 inch projection, the bar stands out from the wall enough that towels hang without pressing tightly against the surface. The 2-5/16 inch width indicates the vertical size of the mounting area, which is useful when positioning above a backsplash or wainscot where height is limited. The specified 8-32 x 1 inch screw size describes the thread and length of the mounting fasteners, so installers can match drill bit sizing and substrate depth for a secure attachment into appropriate wall material.
The BH2651426 Markham 24 towel bar polished chrome part number identifies a bath hardware bar suited to bathrooms that use polished chrome fixtures, allowing the towel bar finish to align with faucets and shower trim. As part of the Markham collection, this bar connects visually with other Markham series bath hardware, which simplifies specifying multiple pieces for the same room. The 24 inch center to center measurement positions this bar in the common mid-size range for residential baths, so it fits well on open wall sections near vanities, tubs, or showers. The 26-7/16 inch total length supports mounting on straight runs of wall where a full-size towel bar is preferred instead of shorter hand-towel hardware. Classified as bath hardware under builders hardware, this bar is directed toward bathroom environments rather than general-purpose utility spaces.
This zinc bath hardware towel bar uses a defined 24 inch center to center spacing, which supports repeatable layout across multiple bathrooms when the same measurement is transferred from plans to on-site marking. The 3-1/8 inch projection standardizes the standoff from the wall, helping installers anticipate clearance relative to doors, trim, or adjacent cabinets when repeating the same bath layout in several units. The 2-5/16 inch width gives a predictable vertical footprint for the posts and bar, which helps maintain consistent reveal distances above backsplashes or decorative bands in tiled showers. The specified 8-32 x 1 inch screw size ties the bar to a known fastener standard, allowing crews to work with familiar drill sizes and drivers during installation. The polished chrome finish and Markham series identity keep the appearance consistent from unit to unit, supporting uniform results on multi-bath projects.
The Markham series towel bar has a 24 inch, or 610 mm, center to center dimension, which sets the spacing of the mounting points on the wall for layout and drilling.
The Amerock Corporation BH2651426 towel bar has a 26-7/16 inch overall length, so it occupies a little more than two feet of horizontal wall space once installed.
This Markham series bar is made from zinc and has a polished chrome finish, giving it a solid metal feel with a bright chrome appearance for bath installations.
The towel bar has a 3-1/8 inch projection from the wall, providing clearance so towels hang away from the surface and can dry without heavy contact.
This Markham zinc towel bar specifies 8-32 x 1 inch screws, so installers can match drilling and driving tools to that thread and length standard during mounting.
The towel bar has a 2-5/16 inch width, describing the vertical footprint of the hardware on the wall and helping position it relative to backsplashes or trim.
The Amerock Corporation Markham series, zinc towel bar with polished chrome finish combines a 24 inch center to center span and 26-7/16 inch overall length, so it fits standard bath layouts needing a full-width towel bar. The 3-1/8 inch projection and 2-5/16 inch width define clear wall clearance and footprint, which supports consistent placement around vanities, tubs, and showers. With its zinc construction, polished chrome surface, and BH2651426 part number, this bar aligns with the Markham bath hardware family for coordinated projects. Use these verified dimensions and finish details to match this towel bar to planned wall space and bath hardware selections.
Sold In: 1 Each