Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Markham pivoting tissue roll holder from Amerock is a zinc double post bath hardware piece that supports a standard tissue roll while matching other Markham Series fixtures, so residential or light commercial bathrooms keep a coordinated, functional layout around the toilet area. The holder uses a pivoting bar between two posts, so the arm swings open to load a new roll and returns to position, keeping the roll captured during normal use for predictable operation. Its 9-3/16 inch overall length provides space for typical bath tissue rolls while remaining compact on the wall, which helps around toilets located close to vanities or partitions where clearance is tight. The holder is part of Amerock bath hardware, so it fits into projects that already specify this brand for towel bars or robe hooks in the same space.
The Markham pivoting tissue roll holder uses a 6-7/8 inch center to center spacing between its zinc posts, which sets the exact horizontal distance for drilling into wall framing or anchors so the pivoting bar aligns properly. Its 3-1/16 inch projection defines the working depth from the finished wall to the outermost part of the holder, helping installers check that the roll clears nearby obstacles and does not interfere with trim or doors. The 2-5/16 inch width at each post shows how much vertical surface each mounting pad covers, so this dimension can be used when placing the holder over tile layouts or between grout joints. With an overall 9-3/16 inch length, the holder establishes a known footprint, which simplifies planning when several bath hardware pieces need to line up visually on the same wall.
This Amerock Markham pivoting tissue roll holder is part of a bath hardware family, so it fits projects where a coordinated look around the toilet area is required using the same golden champagne finish. The zinc double post design supports a pivoting bar that holds a standard tissue roll between the two mounts, making it suited to residential bathrooms or similar spaces where a wall-mounted holder is preferred next to the toilet. Its 9-3/16 inch overall length and 6-7/8 inch center to center spacing allow it to sit comfortably on common stud bay widths or on tiled walls, giving flexibility when selecting left or right side mounting locations. Because the projection is 3-1/16 inches from the wall, the holder positions the roll within easy reach while keeping it away from the finished surface, which helps in tight rooms where clearances to cabinets or shower glass are important.
The 6-7/8 inch center to center measurement on this pivoting double post tissue holder provides a repeatable drilling pattern, which helps when multiple bathrooms on a project require the same mounting layout. Using the 2-5/16 inch width of each post as a guide, installers can line the backplates with grout lines or trim details so the holder sits square and visually consistent with other Amerock Markham pieces. The 3-1/16 inch projection and 9-3/16 inch length work together to define how the roll occupies space near the toilet, making it easier to coordinate locations relative to grab bars, towel bars, or vanity edges. The zinc construction offers a solid feel at the posts and pivot point, which matters when the arm is moved regularly to change rolls and needs to stay aligned over time. The golden champagne finish ties the holder into a broader color palette where warm metallic tones are specified, so designers and installers can repeat this same finish across knobs, pulls, and other bath hardware without introducing a mismatched tone. With manufacturer part number BH26517BBZ clearly identifying this specific model, it is straightforward to order the same holder again for additional rooms or future phases using the exact same dimensions and finish.
The Markham pivoting tissue roll holder has a 9-3/16 inch overall length, which defines the wall footprint and helps plan spacing next to toilets, vanities, or side walls.
The tissue roll holder projects 3-1/16 inches from the wall, setting the working depth so the roll clears trim, doors, or nearby cabinetry during use.
The Amerock Markham tissue holder uses 6-7/8 inch center to center spacing between posts, giving a precise drilling reference for consistent mounting across multiple bathrooms.
The Markham Series pivoting tissue roll holder is made from zinc, providing a solid base for the double post design and the moving pivoting arm.
The BH26517BBZ tissue holder has a golden champagne finish, allowing it to coordinate with other warm metallic Amerock bath hardware in the same space.
The holder uses a pivoting bar between the two zinc posts, so the arm swings open to load a new roll and then closes, keeping the roll captured during regular use.
The Amerock Markham pivoting tissue roll holder in golden champagne combines a zinc double post build, 9-3/16 inch length, and 6-7/8 inch center to center spacing, giving clear dimensions for bath hardware layouts. Its 3-1/16 inch projection and 2-5/16 inch post width supply depth and backplate references that simplify placing the holder around toilets, tile lines, and trim. For projects needing a repeatable, warm-finish tissue holder identified as BH26517BBZ, this model offers a defined footprint and pivoting function that align well with planned bathroom hardware runs.
Sold In: 1 Each