Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Markham pivoting tissue roll holder from Amerock Corporation provides a dedicated bath hardware solution for mounting a tissue roll to the wall, so bath layouts gain a fixed, repeatable location for this everyday fixture. The holder is part of the Markham series and falls under bath hardware, which aligns it with other Markham pieces when a consistent hardware line is required across a bathroom project. Its zinc construction forms the structural body of the double post design, giving a solid base for fastening to the wall surface. The pivoting function allows the active arm to swing for roll changes while remaining attached to the post, so the holder stays on the wall during use and service. A brushed nickel finish defines the visible surface, which sets the appearance and helps match other brushed nickel bath hardware in the same room.
This Amerock Markham zinc pivoting double post tissue roll holder lists a length of 9-3/16 inches, which defines the overall span to plan spacing relative to adjacent fixtures or walls. The projection of 3-1/16 inches sets how far the holder extends out from the mounting surface, which helps determine clearance from vanities, doors, or other obstructions. A width of 2-5/16 inches describes the vertical footprint at the wall, guiding placement on narrow wall sections. The 6-7/8 inch center to center dimension establishes the distance between the two mounting points, which matters when drilling holes in tile or other finished surfaces. Mounting uses 8-32 x 1 inch screws, so installers know the thread size and length being driven into the chosen backing material.
This Markham series zinc pivoting double post tissue roll holder is classified as bath hardware, so it is intended for bathroom environments where a fixed tissue roll point is needed. The brushed nickel finish supports projects where other bath hardware, such as towel bars or robe hooks, also use brushed nickel to keep a unified look across the room. Its 9-3/16 inch length gives enough span to hold a standard tissue roll between the posts, while still fitting on short wall segments next to toilets in compact baths. The 3-1/16 inch projection carries the roll out from the wall to provide hand clearance around the roll, which can help when planning around baseboards or nearby cabinets. With a 2-5/16 inch width at the wall, the holder occupies a modest vertical strip, which is helpful when positioning between other fixtures on congested walls.
The 6-7/8 inch center to center mounting dimension on this Amerock Markham pivoting tissue roll holder gives installers a precise measurement for marking anchor points, which reduces layout guesswork and supports consistent mounting height across multiple baths. Using 8-32 x 1 inch screws defines both the thread pattern and penetration depth into blocking or wall anchors, which helps plan for suitable backing behind drywall or tile. The zinc material provides a stable base for the mounted posts, which supports the pivoting arm when users pull sideways on the roll day after day. The pivoting arm stays attached to the post while swinging, so roll changes rely on a repeatable motion instead of removing a separate bar, which can streamline turnover in multi-bath projects. As part of the Markham series from Amerock Corporation, the holder aligns with other Markham bath hardware dimensions and style, which can simplify coordination when laying out full bath hardware sets.
The Markham zinc pivoting double post tissue roll holder measures 9-3/16 inches in length, 3-1/16 inches in projection, and 2-5/16 inches in width, which helps plan wall space and clearances.
This Amerock Markham tissue holder has a 6-7/8 inch center to center dimension between mounting points, giving a clear value for drilling and layout on finished walls.
The Markham pivoting double post tissue roll holder is made from zinc, providing a solid base material for the posts in standard bath hardware installations.
This Amerock Markham tissue roll holder uses a brushed nickel finish, which supports coordinating it with other brushed nickel bath hardware in the same space.
The specified mounting fasteners for this Markham tissue holder are 8-32 x 1 inch screws, so the thread type and length are defined for planning the wall attachment.
The manufacturer part number for this Amerock Markham pivoting tissue roll holder is BH26517G10, which aids in ordering and matching documentation.
This Amerock Markham pivoting tissue roll holder in brushed nickel combines zinc construction, a double post layout, and a defined 6-7/8 inch center to center mount, giving clear data for layout and fastening. By working with its 9-3/16 inch length, 3-1/16 inch projection, and 2-5/16 inch width, bath hardware runs can be planned around walls, cabinets, and other fixtures. For projects calling for brushed nickel bath hardware from Amerock Corporation, this Markham series holder provides a matching tissue location that fits into coordinated bath hardware plans.
Sold In: 1 Each