Berenson Bravo Series 1-1/4" (32 mm) Center to Center Brushed Copper Tab Pull, - 1046-40BC-P

Berenson Bravo Tab Pull For Clean Cabinet Lines

Berenson Bravo tab pull gives a low-profile way to open doors and drawers while keeping a clean front. This pull is part of the Bravo collection from Berenson Corporation, so it matches other hardware in the same family for consistent projects. The pull is made from aluminum, which keeps weight down on door and drawer fronts and helps when multiple pulls are used across larger installations. A Brushed Copper finish brings a warm metallic look that pairs well with many cabinet colors without reflecting harsh light. The center to center measurement is 1-1/4 inches, or 32 mm, providing a compact grip point well-suited to smaller doors, narrow drawer fronts, or tight layouts. Projection is 1-3/4 inches, creating finger clearance from the front surface so doors can be operated comfortably. The width is 3/4 inch, giving enough surface at the edge for a dependable grip.

Practical Details That Support Cabinet Projects

• The Bravo collection identity from Berenson Corporation ties this tab pull to a broader decorative hardware line, which helps when matching multiple rooms or phasing work across jobs.
• Aluminum construction keeps each pull light, which reduces load on hinges and drawer slides when many pulls are installed across a run of cabinets.
• The Brushed Copper finish softens reflections on the pull surface, which supports a more subtle look on high-visibility doors and drawer banks.
• A 1-1/4 inch (32 mm) center to center dimension suits compact fronts, which helps lay out pulls on narrow rails or smaller drawer faces.
• The 1-3/4 inch projection defines how far the pull stands off the surface, giving consistent hand clearance that feels similar from cabinet to cabinet.
• A 3/4 inch width at the pull body provides a defined edge for fingers, which improves control when opening heavier drawers or fully loaded cabinet doors.

Size And Fit Details For Installing The Pull

This Bravo edge pull is defined by its 1-1/4 inch (32 mm) center to center spacing, so hole drilling on doors and drawers follows that fixed layout. A projection of 1-3/4 inches sets the stand-off from the cabinet face, which influences how far fronts can be gripped when doors are flush with surrounding panels. The pull width of 3/4 inch gives a compact footprint at the edge, which helps when working close to neighboring doors, appliances, or wall returns. A base diameter of 11/16 inch defines the contact area against the cabinet surface, helping seat the pull firmly without a large visual footprint. The overall length or diameter of 1-3/4 inches keeps the pull small, which can be helpful on tight fronts or when hardware should remain visually discreet.

Using This Bravo Edge Pull In Real Projects

Where This 32mm Edge Tab Pull Works Well

The Bravo edge pull with 32 mm center to center measurement fits projects that call for a compact, modern grip along door or drawer edges. Its 1-3/4 inch length keeps it scaled to smaller fronts, so it suits bath vanities, secondary cabinets, or narrow utility doors where larger pulls might crowd the layout. Aluminum construction means each pull adds minimal weight to the front, which can support smoother motion on lighter drawer systems and smaller concealed hinges. The 3/4 inch width sits neatly along an edge without dominating a face frame or slab door design, making it suitable for contemporary flat-panel cabinetry. Brushed Copper finish gives a distinct but controlled color statement, which can tie together fixtures, lighting trims, and other warm metal elements across a room.

Details That Support Consistent Alignment And Operation

The fixed 1-1/4 inch (32 mm) center to center dimension provides a repeatable drilling pattern, which supports straight hardware lines across banks of drawers or upper doors. A 1-3/4 inch projection sets a predictable clearance off the front, so fingers engage the pull consistently even when cabinets are closely spaced. The 3/4 inch width and 11/16 inch base diameter define the contact zone along the cabinet edge, helping pulls seat evenly and line up from piece to piece. Aluminum as the base material allows the Bravo pull to keep a slim profile while still giving a defined edge for gripping, which benefits frequent-use doors. The Brushed Copper finish runs across the visible surfaces, helping installed pulls read as a unified line when used in multiples on tall pantry sections or long drawer stacks.

Common Questions About This Berenson Bravo Pull

Select This 32mm Bravo Pull For Focused Jobs

Choose the Berenson Bravo tab pull when a compact 1-1/4 inch (32 mm) center to center layout, 1-3/4 inch projection, and 3/4 inch width suit your cabinet fronts. The aluminum construction and Brushed Copper finish support coordinated, low-profile hardware lines across your next installation.